p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de bind · Página 3

Vulnerabilidades publicadas para bind en los últimos 30 días: 0. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 59

  1. ALPINE-CVE-2019-6476

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2019-6476

    A defect in code added to support QNAME minimization can cause named to exit with an assertion failure if a forwarder returns a referral rather than resolving the query. This affects BIND versions 9.14.0 up to 9.14.6, and 9.15.0 up to 9.15.4.

    • Actualiza a 9.14.7-r0
    Publicación Actualización
  2. ALPINE-CVE-2019-6475

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2019-6475

    Mirror zones are a BIND feature allowing recursive servers to pre-cache zone data provided by other servers. A mirror zone is similar to a zone of type secondary, except that its data is subject to DNSSEC validation before being used in answers, as if it had been looked up via traditional recursion, and when mirror zone data cannot be validated, BIND falls back to using traditional recursion instead of the mirror zone. However, an error in the validity checks for the incoming zone data can allow an on-path attacker to replace zone data that was validated with a configured trust anchor with forged data of the attacker's choosing. The mirror zo

    • Actualiza a 9.14.7-r0
    Publicación Actualización
  3. ALPINE-CVE-2019-6471

    Media · CVSS 5.9Corrección disponible

    ALPINE-CVE-2019-6471

    A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.

    • Actualiza a 9.14.4-r0
    Publicación Actualización
  4. ALPINE-CVE-2019-6467

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2019-6467

    A programming error in the nxdomain-redirect feature can cause an assertion failure in query.c if the alternate namespace used by nxdomain-redirect is a descendant of a zone that is served locally. The most likely scenario where this might occur is if the server, in addition to performing NXDOMAIN redirection for recursive clients, is also serving a local copy of the root zone or using mirroring to provide the root zone, although other configurations are also possible. Versions affected: BIND 9.12.0-> 9.12.4, 9.14.0. Also affects all releases in the 9.13 development branch.

    • Actualiza a 9.14.1-r0
    Publicación Actualización
  5. ALPINE-CVE-2019-6465

    Media · CVSS 5.3Corrección disponible

    ALPINE-CVE-2019-6465

    Controls for zone transfers may not be properly applied to Dynamically Loadable Zones (DLZs) if the zones are writable Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P2, 9.12.0 -> 9.12.3-P2, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2019-6465.

    • Actualiza a 9.12.3_p4-r0
    Publicación Actualización
  6. ALPINE-CVE-2018-5745

    Media · CVSS 4.9Corrección disponible

    ALPINE-CVE-2018-5745

    "managed-keys" is a feature which allows a BIND resolver to automatically maintain the keys used by trust anchors which operators configure for use in DNSSEC validation. Due to an error in the managed-keys feature it is possible for a BIND server which uses managed-keys to exit due to an assertion failure if, during key rollover, a trust anchor's keys are replaced with keys which use an unsupported algorithm. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Ver

    • Actualiza a 9.12.3_p4-r0
    Publicación Actualización
  7. ALPINE-CVE-2018-5744

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5744

    A failure to free memory can occur when processing messages having a specific combination of EDNS options. Versions affected are: BIND 9.10.7 -> 9.10.8-P1, 9.11.3 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.10.7-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected.

    • Actualiza a 9.12.3_p4-r0
    Publicación Actualización
  8. ALPINE-CVE-2018-5743

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5743

    By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development br

    • Actualiza a 9.14.1-r0
    Publicación Actualización
  9. ALPINE-CVE-2018-5740

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5740

    "deny-answer-aliases" is a little-used feature intended to help recursive server operators protect end users against DNS rebinding attacks, a potential method of circumventing the security model used by client browsers. However, a defect in this feature makes it easy, when the feature is in use, to experience an assertion failure in name.c. Affects BIND 9.7.0->9.8.8, 9.9.0->9.9.13, 9.10.0->9.10.8, 9.11.0->9.11.4, 9.12.0->9.12.2, 9.13.0->9.13.2.

    • Actualiza a 9.12.2_p1-r0
    Publicación Actualización
  10. ALPINE-CVE-2018-5738

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5738

    Change #4777 (introduced in October 2017) introduced an unforeseen issue in releases which were issued after that date, affecting which clients are permitted to make recursive queries to a BIND nameserver. The intended (and documented) behavior is that if an operator has not specified a value for the "allow-recursion" setting, it SHOULD default to one of the following: none, if "recursion no;" is set in named.conf; a value inherited from the "allow-query-cache" or "allow-query" settings IF "recursion yes;" (the default for that setting) AND match lists are explicitly set for "allow-query-cache" or "allow-query" (see the BIND9 Administrative R

    • Actualiza a 9.12.2_p1-r0
    Publicación Actualización
  11. ALPINE-CVE-2018-5737

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5737

    A problem with the implementation of the new serve-stale feature in BIND 9.12 can lead to an assertion failure in rbtdb.c, even when stale-answer-enable is off. Additionally, problematic interaction between the serve-stale feature and NSEC aggressive negative caching can in some cases cause undesirable behavior from named, such as a recursion loop or excessive logging. Deliberate exploitation of this condition could cause operational problems depending on the particular manifestation -- either degradation or denial of service. Affects BIND 9.12.0 and 9.12.1.

    • Actualiza a 9.12.1_p2-r0
    Publicación Actualización
  12. ALPINE-CVE-2018-5736

    Media · CVSS 5.3Corrección disponible

    ALPINE-CVE-2018-5736

    An error in zone database reference counting can lead to an assertion failure if a server which is running an affected version of BIND attempts several transfers of a slave zone in quick succession. This defect could be deliberately exercised by an attacker who is permitted to cause a vulnerable server to initiate zone transfers (for example: by sending valid NOTIFY messages), causing the named process to exit after failing the assertion test. Affects BIND 9.12.0 and 9.12.1.

    • Actualiza a 9.12.1_p2-r0
    Publicación Actualización
  13. ALPINE-CVE-2017-3145

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2017-3145

    BIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8.x, 9.9.0 to 9.9.11, 9.10.0 to 9.10.6, 9.11.0 to 9.11.2, 9.9.3-S1 to 9.9.11-S1, 9.10.5-S1 to 9.10.6-S1, 9.12.0a1 to 9.12.0rc1.

    • Actualiza a 9.11.2_p1-r0
    Publicación Actualización
  14. ALPINE-CVE-2017-3138

    Media · CVSS 5.3Corrección disponible

    ALPINE-CVE-2017-3138

    named contains a feature which allows operators to issue commands to a running server by communicating with the server process over a control channel, using a utility program such as rndc. A regression introduced in a recent feature change has created a situation under which some versions of named can be caused to exit with a REQUIRE assertion failure if they are sent a null command string. Affects BIND 9.9.9->9.9.9-P7, 9.9.10b1->9.9.10rc2, 9.10.4->9.10.4-P7, 9.10.5b1->9.10.5rc2, 9.11.0->9.11.0-P4, 9.11.1b1->9.11.1rc2, 9.9.9-S1->9.9.9-S9.

    • Actualiza a 9.11.0_p5-r0
    Publicación Actualización
  15. ALPINE-CVE-2017-3137

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2017-3137

    Mistaken assumptions about the ordering of records in the answer section of a response containing CNAME or DNAME resource records could lead to a situation in which named would exit with an assertion failure when processing a response in which records occurred in an unusual order. Affects BIND 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0-P3, 9.11.1b1->9.11.1rc1, and 9.9.9-S8.

    • Actualiza a 9.11.0_p5-r0
    Publicación Actualización
  16. ALPINE-CVE-2017-3136

    Media · CVSS 5.9Corrección disponible

    ALPINE-CVE-2017-3136

    A query with a specific set of characteristics could cause a server using DNS64 to encounter an assertion failure and terminate. An attacker could deliberately construct a query, enabling denial-of-service against a server if it was configured to use the DNS64 feature and other preconditions were met. Affects BIND 9.8.0 -> 9.8.8-P1, 9.9.0 -> 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.0 -> 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0 -> 9.11.0-P3, 9.11.1b1->9.11.1rc1, 9.9.3-S1 -> 9.9.9-S8.

    • Actualiza a 9.11.0_p5-r0
    Publicación Actualización
  17. ALPINE-CVE-2016-9444

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2016-9444

    named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted DS resource record in an answer.

    • Actualiza a 9.10.4_p5-r0
    Publicación Actualización
  18. ALPINE-CVE-2016-9147

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2016-9147

    named in ISC BIND 9.9.9-P4, 9.9.9-S6, 9.10.4-P4, and 9.11.0-P1 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a response containing an inconsistency among the DNSSEC-related RRsets.

    • Actualiza a 9.10.4_p5-r0
    Publicación Actualización
  19. ALPINE-CVE-2016-9131

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2016-9131

    named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a malformed response to an RTYPE ANY query.

    • Actualiza a 9.10.4_p5-r0
    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →