Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The crea
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL
Bluetooth: L2CAP: validate option length before reading conf opt value
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds rea
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
In the Linux kernel, the following vulnerability has been resolved:
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
When the SMB sink is used as a perf AUX sink, smb_update_buffer() calls
smb_sync_perf_buffer() to copy hardware trace data into the perf AUX ring
buffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which is
handle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pages
normalization is only applied after the first loop iteration.
This leaves the initial page index underived from the buffer size, which
can result in an out-of-bounds write past dst_pages[] when head exceeds
the AUX buffer size
smb: client: resolve SWN tcon from live registrations
In the Linux kernel, the following vulnerability has been resolved:
smb: client: resolve SWN tcon from live registrations
cifs_swn_notify() looks up a witness registration by id under
cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's
cached tcon pointer. That pointer is not a lifetime reference, and it is
not a stable representative once cifs_get_swn_reg() lets multiple tcons
for the same net/share name share one registration id.
A same-share second mount can keep the cifs_swn_reg alive after the first
tcon unregisters and is freed. The registration then still points at the
freed first tcon, so taking tc_lock or in
ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE
The FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites the
destination file's data via vfs_clone_file_range() with neither the
share-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handle
fp->daccess check that the other write-bearing arms carry. A client can
overwrite destination data on a read-only share, or from a handle opened
with only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp).
FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data via
the clone. Add b
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via
ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after
checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no
per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES
still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of
FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it
O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only
the missing fp->daccess gate would. Reproduced on m
ksmbd: serialize QUERY_DIRECTORY requests per file
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize QUERY_DIRECTORY requests per file
smb2_query_dir() stores a pointer to its stack-allocated private data in
the ksmbd_file readdir_data. Concurrent QUERY_DIRECTORY requests using the
same file handle can overwrite this pointer while an iterate_dir() callback
is still using it, resulting in a stack use-after-free.
Add a per-file mutex and hold it while accessing the shared directory
enumeration state. The lock covers scan restart, dot entry state,
readdir_data setup and iteration, and response construction. This prevents
another request from replacing readdi
ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation
When a blocking byte-range lock request is deferred in the
FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into
the connection's async_requests list via setup_async_work(). The cancel
callback smb2_remove_blocked_lock() holds a reference to the flock.
If the lock waiter is subsequently woken up but the work state is no
longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the
cleanup path calls locks_free_lock(flock) without dequeuing the work from
the async_requests list
ksmbd: require source read access for duplicate extents
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require source read access for duplicate extents
FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to
vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB
access mask granted to the source handle. A handle opened with attribute
access can consequently be used to copy file contents into an
attacker-readable destination.
Require FILE_READ_DATA on the source handle before either VFS operation,
matching other ksmbd data-copy paths.
ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY
commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a
permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to
fsctl_set_sparse and noted that "similar handle-level checks exist in other
functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of
the missing ones, and the most security-relevant: smb2_set_info_sec() calls
set_info_sec() with no per-handle access check.
set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it
rewrites owner/group/mode via not
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: run set info with opener credentials
SMB2 SET_INFO handlers call path-based VFS helpers after checking the
access mask granted to the SMB handle. Those helpers perform their owner,
inode permission and LSM checks using the current ksmbd worker credentials.
Run the complete SET_INFO dispatch with the credentials captured when the
handle was opened. This also removes the separate security information
credential setup and keeps all SET_INFO classes under one credential scope.
Direct override_creds() is used because it can nest with the request
credential overrides alr
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for delete-on-close
Delete-on-close can be completed by deferred or durable handle teardown,
where no request work is available. Both the base-file unlink and the ADS
xattr removal consequently run with the ksmbd worker credentials and can
bypass filesystem permission checks.
Run both operations with the credentials captured in struct file when the
handle was opened. This preserves the authenticated user's fsuid, fsgid,
supplementary groups and capability restrictions at final close.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for ADS I/O
Alternate data streams are stored as xattrs. Unlike regular file I/O,
their read and write paths therefore call VFS xattr helpers which recheck
inode permissions and LSM policy using the current task credentials.
Run ADS I/O with the credentials captured when the SMB handle was opened.
ksmbd: track the connection owning a byte-range lock
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: track the connection owning a byte-range lock
SMB2_LOCK adds each granted byte-range lock to both the file lock list
and the lock list of the connection which handled the request. The
final close and durable handle paths, however, remove the connection
list entry while holding fp->conn->llist_lock.
With SMB3 multichannel, the connection handling the LOCK request can be
different from the connection which opened the file. The entry can
therefore be removed under a different spinlock from the one protecting
the list it belongs to. A concurrent traversal can then ac
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix query directory replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_directory_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix query_info() replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_info_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
smb: client: fix double-free in SMB2_ioctl() replay
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_ioctl() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_ioctl_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix change notify replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_notify_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
smb: client: fix double-free in SMB2_flush() replay
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_flush() replay
SMB2_flush() keeps its response buffer bookkeeping across replay
attempts. If a replayable flush response is received and the retry then
fails before cifs_send_recv() stores a replacement response, flush_exit
will free the stale response pointer a second time.
Reinitialize resp_buftype and rsp_iov at the top of the replay loop so
cleanup only acts on response state produced by the current attempt.
This fixes a double-free without changing replay handling for successful
requests.