ASoC: SOF: validate topology volume range before allocation
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table.
riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args
In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args
On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc
args. However, the RV64 JIT currently does not perform sign-extension for
such kfunc args.
Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register
liveness analysis"), state pruning could potentially omit zero-extension
of 32-bit subregisters, which inadvertently masked the above issue by making
the args appear as if they had been properly sign-extended. After that
commit, the problem is exposed, causing the
ACPI: scan: fix bus ID cleanup on device_add() failures
In the Linux kernel, the following vulnerability has been resolved:
ACPI: scan: fix bus ID cleanup on device_add() failures
When device_add() fails after acpi_device_set_name() has allocated an
instance ID and a new acpi_device_bus_id has been linked into
acpi_bus_id_list, the rollback path only removes wakeup_list and
detaches the ACPI handle data.
That leaves the bus-ID bookkeeping behind and keeps the allocated
instance number consumed.
Move the bus-ID cleanup and wakeup-list removal into a single helper.
Use it from both the normal device teardown path and the device_add()
rollback path. The wakeup list node is initialized before reg
mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler
In the Linux kernel, the following vulnerability has been resolved:
mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler
qcom_cpucp_mbox_irq_fn() calls mbox_chan_received_data() while holding
chan->lock. Under PREEMPT_RT, spin_lock_irqsave() is converted to an
rt_spinlock (rtmutex-based), which tracks ownership and can sleep.
The callback chain triggered by mbox_chan_received_data() eventually
reaches mailbox_clear_channel() -> mbox_send_message() -> add_to_rbuf(),
which attempts to re-acquire the same chan->lock. Since rtmutex detects
the re-entrant lock attempt by the same owner, the thread blocks waiting
for a lock it alread
mailbox: qcom-cpucp: handle NULL data in send_data callback
In the Linux kernel, the following vulnerability has been resolved:
mailbox: qcom-cpucp: handle NULL data in send_data callback
mailbox_clear_channel() calls mbox_send_message() with NULL data to
notify the remote side that the RX channel has been cleared.
qcom_cpucp_mbox_send_data() blindly dereferenced the data pointer,
causing a NULL pointer dereference kernel panic when invoked from
this path under PREEMPT_RT.
Add an explicit NULL check and return early without writing to the
TX register, which is the correct behaviour for a channel-clear
notification.
null_blk: use DEFINE_MUTEX for the file-scope mutex
In the Linux kernel, the following vulnerability has been resolved:
null_blk: use DEFINE_MUTEX for the file-scope mutex
In null_init(), mutex_init(&lock) currently happens after
configfs_register_subsystem(), which exposes the nullb subsystem to
userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach
null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is
initialized, trigger warning:
[ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301
[ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4
......
[ 12
null_blk: register configfs subsystem after creating default devices
In the Linux kernel, the following vulnerability has been resolved:
null_blk: register configfs subsystem after creating default devices
In null_init(), configfs_register_subsystem() currently runs before
register_blkdev(), so when null_blk is built as a module, a racing mkdir()
+ poweron from userspace can reach null_add_dev() while null_major is still
0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0)
and fails:
[root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0,
[ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
[ 2366.529081] CPU: 26 UID:
In the Linux kernel, the following vulnerability has been resolved:
null_blk: free global tag_set on init error path
If shared_tags is enabled, null_setup_tagset() allocates the global tag_set
via null_init_global_tag_set(). If device creation later fails, err_dev
destroys the default devices and calls unregister_blkdev(), but never frees
the global tag_set. Since module init failed, null_exit() is never invoked,
so the global tag_set's tags and maps are permanently leaked.
Free the global tag_set in err_dev, matching null_exit() which does
if (tag_set.ops) blk_mq_free_tag_set(&tag_set).
In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no lo
null_blk: reject per-device queue resize for shared tag set
In the Linux kernel, the following vulnerability has been resolved:
null_blk: reject per-device queue resize for shared tag set
When shared_tags is enabled, null_setup_tagset() makes the device use the
global tag_set, whose driver_data stays NULL. null_map_queues() therefore
falls back to the module-wide g_submit_queues/g_poll_queues instead of any
per-device value.
Resizing submit_queues or poll_queues via configfs on such a device calls
blk_mq_update_nr_hw_queues() on the shared set, shrinking
set->nr_hw_queues. __blk_mq_realloc_hw_ctxs() only grows the
q->queue_hw_ctx[] allocation, so on shrink it merely exits and NULLs the
now-excess
null_blk: serialize configfs attribute stores with the lock
In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute stores with the lock
The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes
(submit_queues, poll_queues) get dev->NAME written again after apply_fn
returns, outside its lock; APPLY=NULL attributes are entirely lockless.
configfs only serializes stores per-open-file, so concurrent stores on
separate fds race.
For apply_fn attributes, once one store's apply_fn has reconfigured the
hardware, a second (losing) store can still overwrite dev->NAME
afterwards. This leaves dev->submit_queues out of sync with the live
queue count, whi
null_blk: serialize configfs attribute updates with device setup
In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute updates with device setup
The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to
change the configuration of a live device by testing
NULLB_DEV_FL_CONFIGURED, but that flag is only set by
nullb_device_power_store() after null_add_dev() has returned, and the
store methods take no lock at all. configfs only serializes writes to
the same open file (buffer->mutex), so a write to any attribute can run
concurrently with null_add_dev() and change the device configuration
while it is being used.
null_add_dev() reads the conf
block: mtip32xx: synchronize ioctls with device removal
In the Linux kernel, the following vulnerability has been resolved:
block: mtip32xx: synchronize ioctls with device removal
The ioctl handlers only test REMOVE_PENDING before entering
mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free
dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already
open block device can reach the handlers while del_gendisk() is in
progress.
Serialize both native and compat ioctls with removal. Set REMOVE_PENDING
before taking the mutex so new callers fail after an in-flight ioctl has
drained, and hold the mutex until the port has been torn down.
hwmon: (coretemp) Fix core_data leak on CPUs without PTS
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Fix core_data leak on CPUs without PTS
pdata->core_data is allocated in init_temp_data() when the first core
temp_data of a package is created, but it is only released from
destroy_temp_data(), and only in the branch that handles the package
temp_data.
Package temp_data is created solely when the CPU supports
X86_FEATURE_PTS. On a CPU without it, coretemp_cpu_online() never calls
coretemp_add_core() with pkg_flag set, so pdata->pkg_data stays NULL.
coretemp_cpu_offline() then skips the removal of the package interface,
destroy_temp_data() is never called
ksmbd: Do not skip lock checks for single-byte ranges
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Do not skip lock checks for single-byte ranges
check_lock_range() uses inclusive ranges. Its callers pass the end
offset as start + length - 1, so start == end represents a valid
single-byte range rather than an empty range.
The start == end shortcut therefore skips mandatory byte-range lock
checks for one-byte reads, writes, copychunk operations and one-byte
truncate ranges. A conflicting lock covering that byte is not checked
and the operation is allowed to proceed.
Remove the shortcut. The truncate size == inode->i_size case is already
handled by only calling ch
ksmbd: validate ipc response length before dereferencing its fields
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ipc response length before dereferencing its fields
ipc_validate_msg() computes the expected message size by reading length
fields out of the response buffer supplied by the userspace ksmbd daemon
(payload_sz, session_key_len, ngroups, ...). Those fields are read before
the buffer is verified to be large enough to contain the struct they belong
to, so a short response makes the read land past the end of the allocation.
handle_response() sizes entry->response purely from the netlink attribute
length (nla_len()) and only guards the leading handle read, so th
ksmbd: free preauth sessions on connection teardown
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: free preauth sessions on connection teardown
SMB3.1.1 multichannel binding preserves the preauthentication hash in a
preauth_session between the NTLM negotiate and authenticate requests.
The binding NTLM negotiate allocates this object and returns
STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends
the authenticate request, neither the authenticate nor error cleanup paths
free the object.
Release any remaining preauthentication sessions when tearing down the
connection. Initialize the list when allocating the connection so that this
cleanup is
smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request()
In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request()
See the procedure below:
ksmbd_tree_conn_connect
ksmbd_share_config_get
share->name = kstrdup() // fail
if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) // false
// do not check `share->name`
ksmbd_ipc_tree_connect_request
strlen(share->name) // null-ptr-deref
smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger()
In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger()
See the procedure below:
ksmbd_launch_ksmbd_durable_scavenger
durable_scavenger_running = true
server_conf.dh_task = kthread_run() // fail, dh_task is an ERR_PTR()
server_ctrl_handle_reset
ksmbd_stop_durable_scavenger
kthread_stop(server_conf.dh_task) // invalid pointer