tcp: fix corruption of urgent data on multi-segment retransmit
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix corruption of urgent data on multi-segment retransmit
On the normal xmit path, while in urgent mode we refuse to build a
multi-segment TSO packet, so every segment gets its own urg_ptr:
/* tcp_write_xmit() */
limit = mss_now;
if (tso_segs > 1 && !tcp_urg_mode(tp))
limit = tcp_mss_split_point(...);
The retransmit path has no such guard. __tcp_retransmit_skb() builds a
segs > 1 skb and hands it to the GSO layer, which only advances th->seq
per segment and copies urg_ptr verbatim:
/* __tcp_retransmit_skb() */
len = cur_mss * segs; /* segs > 1, no urg_mode c
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_htb: limit htb_classify inner-class filter hops
htb_classify() follows each filter-selected inner class by switching
to cl->filter_list, but never bounds the number of hops. A filter on
an inner class can point back to itself or to another inner class that
points back, creating an infinite loop in the packet classification
path with the qdisc lock held and BH disabled — a soft lockup / panic
from a single packet.
Bound the traversal with a hop counter and drop the packet with a
rate-limited warning once the bound is exceeded. The counter is
incremented at th
Crítica · CVSS 9.3EPSS 0,17%Código de explotación públicoCorrección disponible
net: skbuff: don't skb_tx_error() the source skb in skb_zerocopy()
In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't skb_tx_error() the source skb in skb_zerocopy()
skb_zerocopy() copies frags from @from into @to. On an
skb_orphan_frags() failure it calls skb_tx_error(@from), a destructive
operation on the source skb the copy helper does not own. That completes
@from's zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, including the
SKBFL_SHARED_FRAG page-ownership marker.
Both callers already report the failure on their own drop path.
nfnetlink_queue does it at nla_put_failure, and Open vSwitch does it in
the flow-miss drop arm of ovs_dp_process_packet(), so nothing is lost
fs/ntfs3: fix slab-out-of-bounds write in ni_create_attr_list()
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix slab-out-of-bounds write in ni_create_attr_list()
ni_create_attr_list() allocates a fixed buffer of al_aligned(record_size)
(== record_size) bytes and then walks every attribute of the primary MFT
record, writing one ATTR_LIST_ENTRY per attribute and advancing the cursor
by le_size(name_len), with no check against the end of the buffer; the
total size is only computed after the loop.
A minimum-size resident attribute occupies SIZEOF_RESIDENT (0x18 = 24)
bytes on disk, but an unnamed attribute expands to le_size(0) (0x20 = 32)
bytes in the list. Because the n
In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: ffs: fix mm lifetime handling
io_data stores a pointer to the submitting task's mm_struct,
but does not currently hold a reference to it while async
requests are pending.
This can result in a use-after-free if the task exits before
completion handling finishes.
Take a reference with mmgrab() when queuing the read request
and release it with mmdrop() on request completion.
usb: gadget: f_fs: Fix Use-After-Free in AIO error path
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix Use-After-Free in AIO error path
In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io()
fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is
freed. However, for AIO operations, the kiocb cancel function was already
armed and kiocb->private was set to `p`.
If a concurrent cancel operation (such as sys_io_cancel()) executes after
ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free
can occur when the cancellation handler accesses the freed pointer.
To securely fix this race condition, we
ceph: properly decrypt filenames in vmalloc() buffers
In the Linux kernel, the following vulnerability has been resolved:
ceph: properly decrypt filenames in vmalloc() buffers
The fscrypt subsystem uses the scatterlist crypto API, inheriting its
requirement that any buffers are in the linear mapping region. However,
the messenger client uses kvmalloc() to create buffers for messages,
which will occasionally place those buffers in the vmalloc() region when
physical memory fragmentation doesn't permit a large enough kmalloc().
The various callers of ceph_fname_to_usr() directly pass (slices of) raw
messages from the MDS without considering that the messages may be in
vmalloc() buffers, resulting
In the Linux kernel, the following vulnerability has been resolved:
HID: sony: clean up device list on probe failure
sony_input_configured() adds some controllers to sony_device_list before
HID core registers their input devices. input_register_device() can fail
after the callback returns successfully. sony_probe() then observes that
HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware.
The devres-managed sony_sc is freed while its list node remains linked, so
the next matching controller traverses freed memory.
Initialize the list node and device ID to inactive states. Make list
removal idempotent and run the driver-pri
NFSD: Guard admin state-revocation walks with NFSD_NET_UP
In the Linux kernel, the following vulnerability has been resolved:
NFSD: Guard admin state-revocation walks with NFSD_NET_UP
Writing to /proc/fs/nfsd/unlock_filesystem, or sending the
NFSD_CMD_UNLOCK_FILESYSTEM or NFSD_CMD_UNLOCK_EXPORT netlink command,
walks the NFSv4 client hash tables to revoke open state and cancel
async COPY operations. All three handlers gate that walk on
nn->nfsd_serv, but a listener added via portlist or netlink
listener_set sets nn->nfsd_serv before any nfsd thread starts.
nfsd_startup_net() has not yet allocated nn->conf_id_hashtbl, so the
walkers dereference a NULL table. A local administrator with
CAP_SYS_ADM
NFSD: Prevent client use-after-free during close_lru reaping
In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during close_lru reaping
An nfs4_openowner left on nn->close_lru after its final CLOSE keeps
its last closed stateid in oo_last_closed_stid, holding only a raw
pointer to its nfs4_client. The laundromat reaps timed-out entries,
drops nn->client_lock, and calls nfs4_put_stid(), which dereferences
the client through cl_lock. Nothing pins the client across that
window, so a concurrent force_expire_client() can free it and
nfs4_put_stid() reads freed memory. __destroy_client() hits the same
race, walking clp->cl_openowners without cl_lock.
P
NFSD: Prevent client use-after-free during blocked-lock reaping
In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during blocked-lock reaping
A bare lock owner -- its only remaining reference a blocked lock on
nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but
no reference keeping the client alive. When the per-net laundromat
reaps such a lock, freeing the nbl drops the owner reference
held through flc_owner, and the final nfs4_put_stateowner()
takes the client's cl_lock. Because the laundromat detaches the
nbl first, __destroy_client() no longer finds it, so a concurrent
force_expire_client() can free the client before nfs4_put_stat
drm/amd/display: fix division by zero in get_estimated_bw()
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix division by zero in get_estimated_bw()
get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity,
which is zeroed by reset_bw_alloc_struct() and only populated once
DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled.
link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler,
calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED
is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED
has ever fired for that link. A connected USB4/DPIA tunneling device
that reports an estimated-bandwidth change before ever r
In the Linux kernel, the following vulnerability has been resolved:
usb: image: mdc800: change kmalloc() to kzalloc()
Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and
download_urb_buffer to kzalloc(), avoiding potential stack leaks if a
shorter message is received in mdc800_usb_irq() and
mdc800_usb_download_notify()
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downwar
media: usbtv: keep device alive while ALSA card exists
In the Linux kernel, the following vulnerability has been resolved:
media: usbtv: keep device alive while ALSA card exists
The ALSA PCM callbacks store the driver state in pcm->private_data. An
open PCM file can outlive USB disconnect because usbtv_audio_free() uses
snd_card_free_when_closed(). The disconnect path can then drop the V4L2
device reference and free struct usbtv before ALSA releases the substream,
so a later close dereferences freed memory in snd_usbtv_pcm_close().
Take a V4L2 device reference for the ALSA card and drop it from the card
private_free callback. This keeps struct usbtv valid until ALSA has closed
the remaining fi
usb-storage: ene_ub6250: fix race between scan work and probe
In the Linux kernel, the following vulnerability has been resolved:
usb-storage: ene_ub6250: fix race between scan work and probe
ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage
infrastructure and schedules the delayed scan work. The driver then
calls ene_get_card_type(), which sends an ENE command through
ene_send_scsi_cmd() and the usb-storage bulk transfer helpers.
Both the delayed scan work, through usb_stor_Bulk_max_lun(), and
ene_get_card_type() use us->current_urb. The scan work serializes this
access with us->dev_mutex, but the ENE card-type probe does not. If the
scan work runs while ene_get_card_type()
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: clear forceRM when issuing EndTransfer
The forceRM bit of the DEPCMD register controls the behavior of the
EndTransfer command used to stop an active transfer. Older DWC3
programming guide revisions recommended setting forceRM=1 when
issuing EndTransfer. Newer programming guide revisions recommend
issuing EndTransfer with forceRM cleared.
With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer
aborted through the ep_dequeue path was observed to remain active
after EndTransfer completion. A subsequent StartTransfer issued on the
same endpoint trigge
usb: storage: realtek_cr: fix use-after-free on disconnect
In the Linux kernel, the following vulnerability has been resolved:
usb: storage: realtek_cr: fix use-after-free on disconnect
realtek_cr_destructor() calls timer_delete() before the chip containing
the timer is freed. The timer callback may still be running and can
rearm itself, resulting in a use-after-free.
Use timer_shutdown_sync() to wait for the callback and prevent further
rearming. Do this unconditionally because ss_en may be changed after
the timer is armed.
Move timer_setup() into init_realtek_cr() so the timer is initialized
before any failure path can invoke the destructor.
Found by static analysis.
usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop
cc_debounce_dwork is queued from the set_cc() and start_toggling()
callbacks, which run from TCPM's kthread worker. port_stop() returns
before tcpm_unregister_port() destroys that worker. Flushing the worker
during unregister may therefore run a callback which queues the delayed
work after port_stop() has returned.
The delayed work can then run after devres has freed pmic_typec_port.
Use disable_delayed_work_sync() in port_stop() to cancel a pending
instance and prevent the TCPM callbacks from queueing anoth
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: qcom-pmic: cancel reset_work on stop
pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ
handler schedules it just before disable_irq(), the work runs after
remove() frees the struct via devm.
Call cancel_work_sync() after disabling IRQs to close the window.
This issue was found by an in-house static analysis tool.