iio: health: max30102: fix NULL dereference in interrupt handler
In the Linux kernel, the following vulnerability has been resolved:
iio: health: max30102: fix NULL dereference in interrupt handler
The interrupt is requested in max30102_probe() and stays enabled
for the lifetime of the device, but indio_dev->active_scan_mask is only
valid while a buffer is enabled. When an interrupt arrives while no
buffer is enabled, the handler dereferences the NULL active_scan_mask:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
__bitmap_weight+0x64/0x98 (P)
max30102_interrupt_handler+0x48/0x160 [max30102]
Call max30102_fifo_count() at the top of the handle
In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16400: fix unprotected debugfs reads
adis16400_serial_number_fops is open coded and never calls
debugfs_file_get(), so debugfs_remove_recursive() does not wait for a
read in progress and unbind frees the iio_dev underneath it.
Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE
instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and
flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but
moved all three files to debugfs_create_file_unsafe().
serial_number prints three registers as "%.4x-%.4x-%.4x" and
DEFINE_DEBUGFS_ATTR
In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16480: fix unprotected debugfs reads
The firmware_revision and firmware_date file operations are open coded
and never call debugfs_file_get(), which debugfs_create_file_unsafe()
requires. debugfs_remove_recursive() therefore does not wait for a read
in progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead.
iio: light: gp2ap020a00f: drain irq_work after free_irq
In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap020a00f: drain irq_work after free_irq
The threaded IRQ handler queues data->work through irq_work_queue() so
the trigger is polled from a per-CPU context. free_irq() does not flush
an irq_work the handler already queued, so after gp2ap020a00f_remove()
returns that work may still run and call iio_trigger_poll() on data->trig,
which the devm cleanup has already freed, causing a use-after-free.
Add irq_work_sync(&data->work) after free_irq() in remove() and in the
probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs:
fix use-after-free on r
iio: light: rohm-bu27034: Fix infinite delay on error
In the Linux kernel, the following vulnerability has been resolved:
iio: light: rohm-bu27034: Fix infinite delay on error
When reading an integration-time fails, the code will use error code to
compute the sleep time.
Fix this by using the smallest integration time as a default if
reading fails.
iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup
In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup
The sampling frequency tables store each frequency as an integer part and
a fractional part in micro units. num_sampling_freq_avail is initialized
to the number of flattened integer elements because read_avail() returns
the table as a flat array.
bmp280_write_sampling_frequency(), however, indexes the same table as a
two-dimensional array and uses num_sampling_freq_avail as the number of
rows. Convert the flattened element count back to the number of rows
before iterating over the table.
iio: proximity: aw96103: validate firmware data length
In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: aw96103: validate firmware data length
The firmware parser reads a length from the binary header and then uses
it to walk six-byte register/value entries. A truncated firmware image
can make the parser read beyond the copied firmware buffer. A value
smaller than the four-byte count field also underflows, producing a very
large length.
Read the little-endian field with get_unaligned_le32(), as previously
proposed by David Lechner. Validate the header size, reject an
underflowed length, ensure the resulting payload is contained in the
firmware image, and requ
iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure
In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure
pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer,
which only calls iio_triggered_buffer_cleanup() -- it does not undo the
iio_device_register() that already succeeded a few lines above. probe()
then returns the error, the devm-managed indio_dev is freed, but the
iio core still has it registered: the sysfs/chardev nodes stay live and
point at freed memory.
Add an error_unreg_dev label that unregisters the iio device before
falling through to the existing buffer cleanup, mir
iio: trigger: cancel reenable_work before freeing trigger
In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: cancel reenable_work before freeing trigger
iio_trigger_notify_done_atomic() defers ->reenable() into
trig->reenable_work on the system workqueue, and the worker dereferences
the owning trigger through container_of(). Nothing cancels this work
before iio_trig_release() frees the trigger, so a worker armed by the
last in-flight IRQ can outlive the free and touch freed memory.
Cancel it at the top of iio_trig_release(), which every free path
reaches through the device core's final put_device().
Found by an in-house static analysis tool.
In the Linux kernel, the following vulnerability has been resolved:
perf: Require kernel access for text poke events
Perf events with exclude_kernel=1 can be opened without kernel perf
access. However, exclude_kernel does not suppress text-poke sideband
records. Every PERF_RECORD_TEXT_POKE is marked PERF_RECORD_MISC_KERNEL
and contains a raw kernel instruction address.
An unprivileged task can therefore open and mmap a task-local software
event with text_poke=1. Both opening a count-only tracepoint event and
configuring UDP GRO for ESP-in-UDP cause updates to inline static calls;
the observer receives the relocated addresses of the modifie
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix divide-by-zero in btf_struct_walk()
When an access goes past the struct and the last member is a flexible
array, btf_struct_walk() folds the offset back into a single element with
(off - moff) % t->size, but never checks that the element type has a size.
BTF takes an empty struct, so this in program BTF
/* event could be empty */
struct event {
#ifdef HAVE_TIMESTAMP
__u64 ts;
#endif
};
struct batch {
int nr;
struct event events[];
};
divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that
is not MEM_ALLOC, e.g. a plain read of a
tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context
In the Linux kernel, the following vulnerability has been resolved:
tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context
bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If
the sock is a listener that still has children in its accept queue,
tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched()
there trips the debug check:
BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
locks held by test_progs/628: 3, last CPU#
bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()
__htab_map_lookup_and_delete_batch() has no rescheduling point. The
batch count bounds how many entries are copied out, not how many
buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the
map end to end. The empty-bucket fast path is worse: it stays inside
a single rcu_read_lock() / bpf_disable_instrumentation() section for
any run of consecutive empty buckets.
That holds up on small maps, but it falls apart at scale. On a
144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic
BPF_MAP_LOO
bpf: Fix out-of-bounds read of rtt_min in sock_ops
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds read of rtt_min in sock_ops
A sockops prog reading skops->rtt_min never checks the sk type: on the
tcp_conn_request() path sock_ops->sk is a request_sock (non-full), and the
ctx rewrite casts it to a tcp_sock (full) and reads rtt_min past the end of
the request_sock, returning dirty adjacent memory.
SEC("sockops")
int prog(struct bpf_sock_ops *skops)
{
switch (skops->op) {
case BPF_SOCK_OPS_RWND_INIT:
leak = skops->rtt_min; /* reads the request_sock OOB */
...
}
}
For instance one such read returned rtt_min=0xffff8881, the high half
bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk
Syzkaller repeatedly triggered UAF splats related to nodes in
waiting_for_gp_ttrace within the bpf memalloc:
BUG: KASAN: slab-use-after-free in llist_del_first+0x85/0x110 lib/llist.c:61
Read of size 8 at addr ffff8881572cd080 by task syz.4.470/5112
...
llist_del_first+0x85/0x110 lib/llist.c:61
alloc_bulk+0x193/0x460 kernel/bpf/memalloc.c:229
bpf_mem_refill+0x386/0x560 kernel/bpf/memalloc.c:436
Freed by task 14:
...
__free_rcu kernel/bpf/memalloc.c:281 [inline]
__free_rcu_tasks_trace+0x48/0xd0
bpf, arm64: set up the frame pointer for the exception callback
In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: set up the frame pointer for the exception callback
A program acting as exception boundary saves all callee-saved registers,
so build_prologue() takes the exception_cb path and never calls
push_callee_regs(). That is the only place find_used_callee_regs() runs,
and with it the only place ctx->fp_used is set, so the callback prologue
does not emit the
mov x25, sp
that points BPF_REG_FP at the frame the callback runs on. x25 keeps
whatever it held when bpf_throw() was called. If the throw came from a
subprogram that uses its own BPF stack, that is the subprogr
HID: amd_sfh: Validate PCI BAR size before mapping
In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Validate PCI BAR size before mapping
The amd_sfh driver maps PCI BAR 2 using pcim_iomap_regions() and
subsequently accesses MMIO registers at offsets up to 0x10958 (e.g.,
AMD_P2C_MSG3 at 0x1068C). However, the driver never validates that the BAR
size is large enough to cover these accesses. If the driver is bound to a
device with a smaller BAR 2, this leads to an out-of-bounds memory access
and a page fault during the probe function.
For example, a page fault can occur when reading from privdata->mmio +
AMD_P2C_MSG3 in mp2_select_ops():
BUG: unable to hand
squashfs: Add dictionary size range check to prevent shift-out-of-bounds
In the Linux kernel, the following vulnerability has been resolved:
squashfs: Add dictionary size range check to prevent shift-out-of-bounds
When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size
is 0) is mounted, and performs shift operations using dictionarysize, the
shift exponent is -1, causing a shift-out-of-bounds.
Detail as below:
squashfs_comp_opts(msblk, buffer, length)
squashfs_xz_comp_opts()
if (comp_opts)
n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1
if (opts->dict_size != (1 << n) && opts->dict_size !=
(1 << n) + (1 << (n + 1))) <----shift-out-of-bounds
Fix it by adding a di
In the Linux kernel, the following vulnerability has been resolved:
scsi: sd_zbc: Reject disks with too many zones
sd_zbc_read_zones() computes the number of zones with 64-bit arithmetic and
stores the result in the unsigned int nr_zones field of struct
zoned_disk_info, silently truncating counts that exceed 32 bits. The
truncated count is later used to size per-zone resources, while the device
may still report more zones than fit.
Moreover, sd_zbc_report_zones() counts the reported zones with a signed int
zone_idx, which overflows past INT_MAX. Reject devices reporting more than
INT_MAX zones at scan time; such a device is not realistic f
Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel
In send_cancel(), pending mesh_tx objects are removed from the
hdev->mesh_pending list and freed via mesh_send_complete(). However, if
a mesh transmission was already queued onto hdev->cmd_sync_work_list via
mesh_next(), the queued entry retains a raw pointer to mesh_tx.
When hci_cmd_sync_work later processes the entry, it attempts to execute
mesh_send_sync and its destroy callback mesh_send_start_complete using
the already freed mesh_tx pointer, leading to a use-after-free.
Fix this by invoking hci_cmd_sy