net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink
In the Linux kernel, the following vulnerability has been resolved:
net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink
vti6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink
In the Linux kernel, the following vulnerability has been resolved:
net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink
vti_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
net: ipip: require CAP_NET_ADMIN in the device netns for changelink
In the Linux kernel, the following vulnerability has been resolved:
net: ipip: require CAP_NET_ADMIN in the device netns for changelink
ipip_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink
In the Linux kernel, the following vulnerability has been resolved:
net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink
ip6gre_changelink() and ip6erspan_changelink() operate on at most two
netns, dev_net(dev) and the tunnel link netns t->net. They differ once
the device is created in or moved to a netns other than the one the
request runs in. The rtnl changelink path checks CAP_NET_ADMIN only
against dev_net(dev), so a caller privileged there but not in t->net can
rewrite a tunnel that lives in t->net.
Gate both ops on rtnl_dev_link_net_capable() at their top, before any
attribute is parsed.
net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink
In the Linux kernel, the following vulnerability has been resolved:
net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink
ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed.
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: admin-gate legacy LLSEC dump operations
In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table
builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV,
LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which
sets no .flags, so generic netlink runs them ungated. The modern
nl802154 family admin-gates the equivalent reads via
NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM.
Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve
the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC)
and relies entirely on the SPI completion callback
ca8210_spi_transfer_complete() to free it.
The spi_async() API only invokes the completion callback on successful
submission. On failure it returns a negative error code without ever
queuing the callback, which leaves cas_ctl and its embedded spi_message
and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is
inside the completion callback, so there is no other reclamation path.
ca8210_
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange
a kmalloc'd buffer pointer through a struct kfifo, but pass a literal
'4' as the byte count to kfifo_in()/kfifo_out().
This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the
low 4 bytes of the 8-byte pointer are written into the FIFO. The reader
then reads back 4 bytes into an 8-byte local pointer variable, leaving
the upper 4 bytes uninitialized stack data. The first dereference of
the reconstructed pointer (fifo_buffer[1]) a
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
When hardware page table walker (PTW) is enabled on LoongArch, the CPU
may set _PAGE_DIRTY directly in the page table entry during a write TLB
miss, without going through the software TLB store handler. The software
TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED
together:
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e.
_PAGE_MODIFIED is left unchanged. This creates a window where a PTE has
_PAGE_DIR
ipmi: Fix user refcount underflow in event delivery
In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix user refcount underflow in event delivery
ipmi_alloc_recv_msg(user) takes the temporary user reference owned by the
receive message, and ipmi_free_recv_msg() drops it again. If event delivery
fails after allocating receive messages for earlier users,
handle_read_event_rsp() rolls those messages back with
ipmi_free_recv_msg().
That rollback path still drops user->refcount explicitly after freeing each
message. The extra put can free a user that remains linked on intf->users,
so later event delivery may dereference a freed user or trip refcount_t's
addition-on-zero
espintcp: use sk_msg_free_partial to fix partial send
In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents.
In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count oper
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation.
net: liquidio: fix BAR resource leak on PF number failure
In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: fix BAR resource leak on PF number failure
If cn23xx_get_pf_num() fails, the function returns without
unmapping either BAR. Unmap both BARs before returning from
the error path.
Found by manual code review.
net: lan743x: Initialize eth_syslock spinlock before use
In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: Initialize eth_syslock spinlock before use
lan743x_hardware_init() calls pci11x1x_strap_get_status() during the
PCI11x1x probe sequence. That helper acquires the Ethernet subsystem
hardware lock via lan743x_hs_syslock_acquire(), which relies on
adapter->eth_syslock_spinlock to serialize access.
The spinlock is currently initialized only after the strap status is
read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized
spinlock can trip the spinlock debug check.
Fix by initializing adapter->eth_syslock_spinlock before reading the
strap status s
net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked
multiq_dequeue() takes a packet from a band's child with a direct
->dequeue() call after multiq_peek() peeked it. When the child is
non-work-conserving the peek stashes the skb in the child's gso_skb, so
the direct dequeue returns a different skb and orphans the stash,
desyncing the child's qlen/backlog. With a qfq child reached through a
peeking parent (e.g. tbf) this re-enters the child on an emptied list and
dereferences NULL, panicking the kernel from softirq on ordinary egress.
Take
net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When taprio's software path peeks a non-work-conserving child qdisc, the
child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq()
then takes the packet with a direct child ->dequeue() call, which ignores
that stash, orphans the peeked skb and desyncs the child's qlen/backlog.
With a qfq child this re-enters the child on an emptied list and
dereferences NULL, panicking the kernel from softirq on ordinary egress.
Take the packet through qdisc_dequeue_peeked(), as sch_red and s
orangefs: keep the readdir entry size 64-bit in fill_from_part()
In the Linux kernel, the following vulnerability has been resolved:
orangefs: keep the readdir entry size 64-bit in fill_from_part()
fill_from_part() computes the size of a directory entry in size_t but
stores it in a __u32. An entry length near U32_MAX wraps it to a small
value, bypasses the bounds check, and is then used to index the entry,
reading far past the directory part -- an out-of-bounds read that oopses
the kernel.
Compute the size as a u64 so it cannot truncate; the bounds check then
rejects the entry. The trailer is supplied by the userspace client.
ata: libata-core: Reject an invalid concurrent positioning ranges count
In the Linux kernel, the following vulnerability has been resolved:
ata: libata-core: Reject an invalid concurrent positioning ranges count
ata_dev_config_cpr() takes the number of range descriptors from buf[0]
of the concurrent positioning ranges log (up to 255), which the device
reports independently of the log size in the GPL directory. The count is
then walked at a fixed 32-byte stride in two places with no bound: the
log read here, and the INQUIRY VPD page B9h emitter, which writes one
descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device
reporting a count larger than its own log overflows the read buffer (up
to 7704 by