Vulnerabilidades de linux · Página 30

tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().

In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv(). tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around sk->sk_forward_alloc"). However, there is still a small race window between tcp_v6_rcv() and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN to TCP_CLOSE, causing skb_clone_and_charge_r() to be called locklessly and resulting in the splat below. [0] Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well. This is fine for non-listeners becau

• Actualiza a 6.1.190-1

tcp: do not let tcp_rmem be set below 4096

In the Linux kernel, the following vulnerability has been resolved: tcp: do not let tcp_rmem be set below 4096 We can hit a division by zero crash in tcp_rcvbuf_grow() and tcp_rcv_space_adjust(): divide error: 0000 [#1] PREEMPT SMP RIP: 0010:tcp_rcvbuf_grow+0x187/0x450 net/ipv4/tcp_input.c:939 ... grow = div_u64(((u64)rcvwin << 1) * (newval - oldval), oldval); The division uses oldval = tp->rcvq_space.space as divisor. When tp->rcvq_space.space is zero, this leads to a divide-by-zero exception. tp->rcvq_space.space is initialized in tcp_init_buffer_space(): tp->rcvq_space.space = min3(tp->rcv_ssthresh, tp->rcv_wnd,

• Actualiza a 6.1.190-1

dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg()

In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg() In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist putting each entry into 'sg', but the entry length is read from 'sgl' (the list head) instead of 'sg' (the current entry): for_each_sg(sgl, sg, sg_len, i) { addr = sg_dma_address(sg); avail = sg_dma_len(sgl); /* should be 'sg' */ Consequently 'avail' is always the length of the first entry. For multi-sg lists this causes out-of-bounds reads when a later entry is shorter than the first, and silent data loss when it i

• Actualiza a 6.1.190-1

Bluetooth: coredump: Quiesce dump work on unregister

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: coredump: Quiesce dump work on unregister hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers queue dump_rx without holding an hdev reference. Unregister leaves both works live, so disconnecting during an active dump lets them access hdev after hci_release_dev() frees it. Shut down coredump processing during unregister. Close the producer gate under dump_q.lock before disabling both works, then free the active buffer and queued packets under hci_dev_lock. Serializing the gate with enqueue prevents controller-specific workers from adding packets

Bluetooth: hci_qca: Do not write to the serial port after it is closed

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Do not write to the serial port after it is closed hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP is set (for example, for the WCN399x family). A failed hci_dev_open_sync() following a successful qca_setup() calls hdev->close() but not hdev->shutdown(), so the port is closed while power->vregs_on is left true. qca_serdev_remove() then passes its power->vregs_on test and calls qca_power_off(), which writes to the closed port unconditionally. Seen on a WCN3988 by unbinding the driver after a controller failure. The trace below i

Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access btmtksdio.c and btmtkuart.c cast a received WMT event straight to struct btmtk_hci_wmt_evt and read its op/flag fields without checking the event is long enough to contain them, unlike btmtk.c. The FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc and reads its 2-byte status field, again without a length check. Firmware that sends a short or malformed WMT event makes both drivers read past the end of the received SKB. Mirror btmtk.c: validate the base WMT header with skb_pull_

Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup rfcomm_sock_cleanup_listen() closes unaccepted child sockets through rfcomm_sock_close(), which takes the child socket lock before rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these locks in reverse order while handling connections and DLC state changes, so lockdep reports a possible deadlock. Close dequeued children without taking their socket lock. The accept queue owns a reference to each child, and bt_accept_dequeue() locks the child while unlinking it and clearing its parent pointe

• Actualiza a 6.1.190-1

af_unix: Unify scc_index when finalising SCC in __unix_walk_scc().

In the Linux kernel, the following vulnerability has been resolved: af_unix: Unify scc_index when finalising SCC in __unix_walk_scc(). Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.") changed Tarjan's algorithm to update lowlink with lowlink, which is called lowpoint (unix_vertex.scc_index). unix_vertex_dead() assumes all vertices in an SCC share the same lowpoint, but this is not always true if an SCC has two or more back edges, depending on the order of DFS. For example, the graph below has two back edges from B to A and from C to B. A --> B --> C ^ | ^ | `----' `----' If DFS walks through A -> B -> C -> B (-

net: stmmac: fix TSO header length truncation

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO header length truncation stmmac_tso_xmit() stores the protocol header length returned by stmmac_tso_header_size() in a u8. stmmac_tso_valid_packet() admits headers up to 1023 bytes, so a header longer than 255 bytes wraps modulo 256 (486 becomes 230, 256 becomes 0). A TCP over IPv6 socket carrying a few hundred bytes of sticky destination/hop-by-hop options makes skb_tcp_all_headers() exceed 255 while staying below the 1023-byte limit, so such an skb reaches stmmac_tso_xmit(). Widen proto_hdr_len to unsigned int, which is sufficient since the value is

pppoatm: ensure a writable skb header and linear data

In the Linux kernel, the following vulnerability has been resolved: pppoatm: ensure a writable skb header and linear data In pppoatm_send(), LLC encapsulation checks whether there is sufficient headroom for the 4-byte LLC header, but does not ensure that the skb header is writable. Normal transmit packets passing through ppp_start_xmit() have their header unshared via skb_cow_head(). However, packets can also reach pppoatm_send() via PPP channel bridging (PPPIOCBRIDGECHAN) without going through ppp_start_xmit(). Use skb_cow_head() to ensure both sufficient headroom and a writable header before pushing the LLC header. While at it: - Call

• Actualiza a 6.1.190-1

drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown

In the Linux kernel, the following vulnerability has been resolved: drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown In drop_monitor teardown paths (net_dm_trace_off_set(), net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set() and net_dm_hw_monitor_start()), per-CPU timers are stopped using timer_delete_sync() followed by cancel_work_sync(). However, there is a circular dependency between send_timer and dm_alert_work: 1) sched_send_work() (timer callback) schedules dm_alert_work. 2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data() or net_dm_hw_reset_per_cpu_data()

net: bridge: vlan: fix bugs caused by switchdev deletion errors

In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix bugs caused by switchdev deletion errors Allowing switchdev to prevent vlan deletion and error out in __vlan_del could cause multiple different issues - inconsistent state, memory leaks when flushing, NULL pointer dereference on bridge error when flushing. It doesn't make sense to allow it to stop __vlan_del, so log the error and continue with software vlan deletion. This is also consistent with 8021q behaviour.

netlink: do not free nlk->groups while lockless readers can use it

In the Linux kernel, the following vulnerability has been resolved: netlink: do not free nlk->groups while lockless readers can use it netlink_realloc_groups() uses krealloc() under netlink_table_grab(). Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old bitmap is freed immediately. Two readers of nlk->groups / nlk->ngroups do not hold the netlink table lock: 1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the rhashtable walk in __netlink_diag_dump(), which only holds RCU. Only the mc_list part of the dump takes nl_table_lock. 2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been

KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid()

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid() kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a reference on the kvm_nested_guest pointer obtained from the IDR. A concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove / --refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving the iterating vCPU with a dangling pointer. The subsequent mutex_lock(&gp->tlb_lock)

• Actualiza a 6.1.190-1

powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba

In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba(). While doing so, the passed in argument npages is ignored and constant value '1' is used leaving out a possible overflow as the callers can legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT cases. Fix this by accounting for 'npages', checking for arithmetic overflow, and verifying that the entire requested range (ioba - offset + npages) does not

• Actualiza a 6.1.190-1

btrfs: handle lack of space when cleaning up verity items

In the Linux kernel, the following vulnerability has been resolved: btrfs: handle lack of space when cleaning up verity items When enable_verity() hits the qgroup limit, rollback_verity() needs its own metadata reservation. When the qgroup limit or lack of space refuses the rollback, the whole filesystem is forced read-only even though the qgroup limit was for one subvolume only. Also orphan cleanup at the next mount fails the same way, so the leftover items are never removed: with -EDQUOT the subvolume stays unreachable, and with -ENOSPC on a full filesystem the next read-write mount fails. Start transactions with btrfs_start_transaction_

net: lock the socket in sock_gettstamp()

In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will

• Actualiza a 6.1.190-1

net: ethernet: cortina: Ack RX overrun interrupt correctly

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Ack RX overrun interrupt correctly The RX overrun interrupt is reported in interrupt status register 4, but gmac_irq() acknowledges it using the RX descriptor error bit from status register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1 the shift leaves no bit in the 32-bit register. Acknowledge the same per-port RX overrun bit that was detected.

• Actualiza a 6.1.190-1

x86/kprobes: Fix crash when probing CS CALL instructions

In the Linux kernel, the following vulnerability has been resolved: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page

net: mvpp2: prevent buffer overflow in page_pool allocation

In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: prevent buffer overflow in page_pool allocation The per‑processor buffering scheme is supported only if the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8). This is already checked in mvpp2_probe() during the initial activation of percpu_pools. However, mvpp2_change_mtu() may later call mvpp2_bm_switch_buffers(priv, true) without this check, which can lead to an out-of-bounds access in the priv->page_pool array in mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ entries, and mvpp2_get_nrxqs() may return exactly that value. The p

• Actualiza a 6.1.190-1