thunderbolt: Keep the domain reference while processing hotplug
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep the domain reference while processing hotplug
We process hotplug events in a workqueue that may run after the domain
has been removed by tb_domain_remove(). For example if user unloads the
driver while at the same time plugging a device router we may have
scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by
taking the domain reference before scheduling the hotplug handler in
tb_queue_hotplug().
net/mlx5: HWS, Handle destroying table that has a miss table
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Handle destroying table that has a miss table
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage.
drm/amd/ras: reset CPER ring on corrupt entry size
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: reset CPER ring on corrupt entry size
When CPER ring overflow handling advances the read pointer, it trusts the
parsed entry size from the current ring contents. Corrupt CPER data can
produce an entry size that does not advance rptr after dword conversion
and pointer masking.
In that case the recovery loop keeps testing the same location while
holding the CPER ring mutex. This can hang the worker that is writing the
next CPER record.
Detect a no-progress rptr update and reset the CPER ring to an empty
state instead. This drops the corrupt contents and lets th
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Validate SENSOR_UPDATE payload size
SENSOR_UPDATE carries one or more sensor readings after the fixed
notification header. The parser derives the expected reading count
from the sensor description, but it did not verify that the received
payload contains those entries before parsing them.
Reject truncated update notifications before reading the variable
array.
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size
BASE_ERROR_EVENT carries a variable number of message reports,
with the count encoded in error_status. The notification parser used
that count without checking whether the received payload contained all
reported entries.
Reject truncated payloads before copying the report array.
wifi: mac80211: validate deauth frame length before reason access
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate deauth frame length before reason access
ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking
that the fixed field is actually present in the received frame.
Validate the deauth frame length first and only then read the reason
code.
In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: reject short monitor TX frames
In monitor mode, lbs_hard_start_xmit() casts skb->data to a
radiotap TX header, skips that header, and then copies the 802.11
destination address from offset 4 in the remaining frame. The
generic length check only rejects zero-length and oversized skbs, so
a short monitor frame can be read past the end of the skb data.
Require enough bytes for the radiotap TX header and the destination
address field before using the monitor-mode header layout.
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix sched scan IE sizing
Scheduled scan built the probe request before iwl_mvm_scan_fits(),
so oversized IEs could be copied into the fixed preq buffer before
length validation. Move iwl_mvm_build_scan_probe() after the fits
check.
Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len()
so userspace limits account for driver-inserted DS/TPC bytes.
arm64: kprobes: Allow reentering kprobes while single-stepping
In the Linux kernel, the following vulnerability has been resolved:
arm64: kprobes: Allow reentering kprobes while single-stepping
A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This
can happen when tracing or perf code runs from the debug exception path
while the first kprobe is preparing or executing its out-of-line
single-step instruction.
Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable,
the same as a hit in KPROBE_REENTER. This is too strict. A hit in
KPROBE_HIT_SS is still a one-level reentry and can be handled by saving
the current kprobe state and setting up single-step for the new probe,
j
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO
hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload
to a struct hwsim_tx_rate * and unconditionally reads
IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds
the attribute from above (NLA_BINARY .len is a maximum) and the op sets
GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is
accepted and the loop reads past the payload.
Require the exact length in the policy, so a malformed attribute is
rejected before the handler runs.
drm/gma500: return errors from Oaktrail HDMI I2C reads
In the Linux kernel, the following vulnerability has been resolved:
drm/gma500: return errors from Oaktrail HDMI I2C reads
xfer_read() waits for the HDMI I2C transaction to reach
I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from
wait_for_completion_interruptible_timeout(). If the interrupt never
advances the transaction state, the loop can wait forever.
Return -ETIMEDOUT when the completion wait expires, propagate interrupted
waits, and make the I2C master_xfer callback return the first transfer
error instead of reporting a successful message count.
ima: return error early if file xattr cannot be changed
In the Linux kernel, the following vulnerability has been resolved:
ima: return error early if file xattr cannot be changed
During early boot, the filesystem is read-only and any changes
to xattrs are not allowed. This fails in case of ext4 because
changing xattr starts an ext4 transaction which fails with the
following warning.
WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561
CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
mmc: core: Add validation for host-provided max_segs
In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Add validation for host-provided max_segs
The max_segs field is of type unsigned short, and if a host driver
sets an excessively large value, it may be truncated to zero. This
can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size
allocation request, which leads to undefined behavior.
Under the SLUB allocator, kmalloc(0) returns a special pointer
(ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to
true, and sg_init_table() will then attempt to access invalid memory,
resulting in a crash:
dwmmc_rockchip 2a310000.mmc: Successfully tuned pha
In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_port: recognize UPIO_AU
My MIPS Alchemy systems generate the following warning during
probe of the 8250 driver:
WARNING: drivers/tty/serial/8250/8250_port.c:462 at set_io_from_upio+0xfc/0x124, CPU#0: swapper/0/1
Unsupported UART type 4
[...]
[<80521d40>] set_io_from_upio+0xfc/0x124
[<80521dfc>] serial8250_set_defaults+0x94/0xe0
[<80520fb4>] serial8250_register_8250_port+0x288/0x51c
[<805214ec>] serial8250_probe+0x160/0x1e8
[<8053b5f0>] platform_probe+0x64/0x90
The least invasive fix is to recognize UPIO_AU (type 4) in set_io_from_upio()
and do nothing, since
media: chips-media: wave5: Add range checks for dec_output_info
In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add range checks for dec_output_info
If the driver's dec_output_info contains invalid data the driver can
write in invalid memory. Add a range check for that.
This fixes this smatch error:
drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst->frame_buf' 64 <= 127
net: bridge: remove stale rcu_barrier() in br_multicast_dev_del()
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: remove stale rcu_barrier() in br_multicast_dev_del()
This rcu_barrier() came from a time call_rcu() calls were used in
net/bridge/br_multicast.c.
Now kfree_rcu() is there, we can remove this problematic rcu_barrier()
which causes extreme RTNL pressure in many syzbot reports.
INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537.
task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337
Workqueue: netns cleanup_net
Call Trace:
<TASK>
[<ffff
In the Linux kernel, the following vulnerability has been resolved:
ntfs3: handle set_blocksize failures
ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
In the Linux kernel, the following vulnerability has been resolved:
isofs: handle set_blocksize failures
isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
irqchip/gic-v5: Immediately exec priority drop following activate
In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Immediately exec priority drop following activate
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has
no MSI controller device tree node and GICv4, it results a panic as
“gic_domain” is NULL and the kernel attempts to access it.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
Mem abort info:
ESR = 0x0000000096000006
CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 81402005 (Nzcv daif +PAN -UAO -TCO