Vulnerabilidades de linux · Página 85

fbdev: ssd1307fb: defer I2C transfers from damage callbacks

In the Linux kernel, the following vulnerability has been resolved: fbdev: ssd1307fb: defer I2C transfers from damage callbacks The fbdev damage callbacks may run from fbcon while printk has disabled preemption. They currently update the display synchronously, which enters the sleeping I2C transfer path from atomic context. A complete report from an RK3566 system follows: [ 258.129004] watchdog: watchdog0: watchdog did not stop! [ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003 [ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_ua

fbdev: uvesafb: unregister connector callback on init failure

In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: unregister connector callback on init failure uvesafb_init() registers the v86d connector callback before registering the platform driver. If platform_driver_register() fails, the function returns the error directly and leaves the connector callback registered. The later platform-device failure path already unregisters the callback. Add the same cleanup before the final return when platform-driver registration fails. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

• Actualiza a 6.1.190-1

forcedeth: fix off-by-one when saving/restoring non-PCI config space

In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix off-by-one when saving/restoring non-PCI config space nv_suspend() and nv_resume() walk the non-PCI configuration space with for (i = 0; i <= np->register_size/sizeof(u32); i++) which runs one iteration too many. saved_config_space is declared as u32 saved_config_space[NV_PCI_REGSZ_MAX/4]; and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3 device register_size/sizeof(u32) is exactly the array length and the last iteration addresses one element past the end. The element it lands on is np->name_rx[0..3]: saved_config_space[] is foll

• Actualiza a 6.1.190-1

fsnotify: Fix stale object mask after concurrent mark updates

In the Linux kernel, the following vulnerability has been resolved: fsnotify: Fix stale object mask after concurrent mark updates When a mark gets a new event bit, fanotify and inotify may avoid recalculating the object mask if the cached aggregate already contains that bit. This is racy with a recalculation triggered by a concurrent update to another mark on the same connector. The concurrent scan can read the mark before the new bit is added, while the updater reads the old aggregate before that scan publishes its result. The updater then skips recalculation and the scan publishes a mask without the bit, leaving the object mask stale aft

• Actualiza a 6.1.190-1

hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device

In the Linux kernel, the following vulnerability has been resolved: hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device The OMAP SSI driver uses a synthetic HSI controller device allocated via hsi_alloc_controller(), which does not go through the normal OF/platform device initialization path. As a result, the embedded struct device does not have a DMA mask initialized by default. After recent DMA API hardening changes, dma_map_sg() and related helpers now require a valid dma_mask to be present, otherwise the driver may crash or trigger warnings when attempting DMA mapping operations. Fix this by explicitly initializi

• Actualiza a 6.1.190-1

ACPI: pfr_update: fix stack buffer overflow in query_capability()

In the Linux kernel, the following vulnerability has been resolved: ACPI: pfr_update: fix stack buffer overflow in query_capability() query_capability() copies four ACPI buffer objects returned by the firmware _DSM into fixed-size u8[16] fields in struct pfru_update_cap_info using memcpy with the firmware-supplied length: memcpy(&cap_hdr->code_type, elements[CAP_CODE_TYPE_IDX].buffer.pointer, elements[CAP_CODE_TYPE_IDX].buffer.length); The same pattern repeats for drv_type, platform_id, and oem_id. If the firmware returns buffer.length > 16 for any of these fields, memcpy writes past the destination array. struct pfru

• Actualiza a 6.1.190-1

ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes

In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte ata_scsi_rbuf staging buffer, and the number of bytes copied is compared against the logical sector size by the caller: size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block); if (size != len) /* len == sdp->sector_size */ goto invalid_param_len; ata_format_dsm_trim_descr() clamps

• Actualiza a 6.1.190-1

auxdisplay: charlcd: cancel backlight work on registration failure

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: charlcd: cancel backlight work on registration failure With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before charlcd_register() calls misc_register(). If registration fails, the caller frees the charlcd object while delayed work still contains its address. Add charlcd_deinit() to cancel the delayed work and turn the backlight off. Use it for both registration rollback and normal unregistration.

• Actualiza a 6.1.190-1

Bluetooth: eir: Fix OOB read in eir_get_service_data()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix OOB read in eir_get_service_data() eir_get_service_data() walks the advertising data for a Service Data field with a matching UUID. On a mismatch it advances: eir += dlen; eir_len -= dlen; eir_get_data() reports dlen as the field's data length, but the field spans dlen + 2 bytes once its length and type bytes count, and more when non-Service-Data fields were skipped to reach it. The pointer lands correctly on the next field. eir_len does not, and the shortfall compounds across fields until eir_get_data() reads the length and type bytes of a

• Actualiza a 6.1.190-1

bnx2x: fix double free in bnx2x_init_firmware() error path

In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix double free in bnx2x_init_firmware() error path bnx2x_init_firmware() frees bp->init_ops, bp->init_data and bp->init_ops_offsets in its error path without setting them to NULL. The cleanup function bnx2x_release_firmware() frees the same three pointers unconditionally, so if init_firmware fails and release_firmware is later called (e.g. from __bnx2x_remove or through the function state machine), all three are freed a second time. Set each pointer to NULL after kfree() in the error path so that the subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-o

• Actualiza a 6.1.190-1

bpf: Disable preemption in __bpf_get_stack

In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in __bpf_get_stack get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and releases its recursion slot via put_callchain_entry() before returning, so nothing keeps the entry reserved while __bpf_get_stack() consumes it below. A preemptible BPF program (e.g. a non-sleepable raw tracepoint program on a PREEMPT kernel, which runs under migrate_disable() but not preempt_disable()) can be scheduled out between obtaining the entry and the copy. Another task scheduled on the same CPU then reuses the same per-CPU buffer and overwrites trace->

bpf: Harden bloom filter sizing and indexing on 32-bit kernels

In the Linux kernel, the following vulnerability has been resolved: bpf: Harden bloom filter sizing and indexing on 32-bit kernels bloom_map_alloc() has two 32-bit-specific problems when the computed bitmap reaches the U32_MAX fallback case. First, BITS_TO_BYTES(U32_MAX) is evaluated with 32-bit arithmetic. The addition performed by DIV_ROUND_UP wraps, so the map allocates only the fixed-size bloom filter object while keeping bitset_mask == U32_MAX. Subsequent updates can then write past the allocated object. Second, fixing only the allocation size is not sufficient. The bloom hash is a u32, but set_bit() takes a signed long bit number an

• Actualiza a 6.1.190-1

dm-era: fix shadowed superblock leak on take-snap failure

In the Linux kernel, the following vulnerability has been resolved: dm-era: fix shadowed superblock leak on take-snap failure metadata_take_snap() bumps the live superblock refcount and then dm_tm_shadow_block() allocates a new block for the metadata snapshot. If the subsequent dm_sm_inc_block() of writeset_tree_root or era_array_root fails, the function only unlocks the clone and returns. The newly allocated shadow block is never returned to the metadata space map, so each failed take-snap permanently leaks one metadata block. Free the clone with dm_sm_dec_block() on those error paths, matching the final step of metadata_drop_snap().

• Actualiza a 6.1.190-1

dm raid1: reserve space for NUL-terminator in build_constructor_string()

In the Linux kernel, the following vulnerability has been resolved: dm raid1: reserve space for NUL-terminator in build_constructor_string() Reserve space for the termination NUL after the maximum 20 decimal digits of a long long value to avoid buffer overflow in sprintf().

• Actualiza a 6.1.190-1

dm array: validate array block headers on read

In the Linux kernel, the following vulnerability has been resolved: dm array: validate array block headers on read array_block_check() validates blocknr and csum and nothing else, while node_check(), next to it, has bounded the structural fields since both were written. dm_array_cursor_next() takes its loop bound from the on-disk nr_entries and element_at() is unguarded pointer arithmetic, so a count larger than the block holds keeps the cursor in one block while the index grows past it and the read walks off the dm-bufio buffer -- dm_cache_load_mappings() drives it once per cache block at activation. Check the header against itself: rejec

dm array: reject an array block whose value size is not the caller's

In the Linux kernel, the following vulnerability has been resolved: dm array: reject an array block whose value size is not the caller's array_block_check() can only compare the header against itself, so a block with value_size 4 and max_entries 1018 is internally consistent and passes. dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the roots for both live in the superblock. Point the mappings root at a hint block and __load_mappings() walks it through an info whose value size is 8, so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160 of a 4096-byte block. get_ablock() and __shadow_ablock() ar

• Actualiza a 6.1.190-1

Bluetooth: RFCOMM: serialize security confirmation handling

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: serialize security confirmation handling rfcomm_security_cfm() looks up a session on session_list and then walks its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown uses rfcomm_mutex, krfcommd can close and free the same session and DLCs concurrently: hci_rx_work krfcommd ----------- --------- rfcomm_session_get() rfcomm_lock() rfcomm_session_close() rfcomm_dlc_unlink()

• Actualiza a 6.1.190-1

jbd2: bound shrinker scans by examined checkpoint buffers

In the Linux kernel, the following vulnerability has been resolved: jbd2: bound shrinker scans by examined checkpoint buffers The jbd2 shrinker currently accounts only checkpoint buffers that it successfully releases against nr_to_scan. Busy buffers therefore do not consume the scan budget. If a checkpoint transaction contains mostly busy buffers, the shrinker can scan its entire checkpoint list while holding journal->j_list_lock. Large checkpoint lists can result in excessive lock hold times and leave other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls. Pass nr_to_scan into journal_shrink_one_cp_list() and decrement i

jbd2: check need_resched() when skipping busy checkpoint buffers

In the Linux kernel, the following vulnerability has been resolved: jbd2: check need_resched() when skipping busy checkpoint buffers journal_shrink_one_cp_list() skips busy checkpoint buffers when called with JBD2_SHRINK_BUSY_SKIP. The continue statement on this path also skips the need_resched() check at the end of the loop body. Consequently, when a checkpoint list contains mostly busy buffers, the shrinker can walk the entire list while holding journal->j_list_lock, even when a reschedule has been requested. Large checkpoint lists under memory pressure can therefore cause long lock hold times and leave other CPUs spinning on j_list_lo

ipip: fix skb leak in collect_md mode when metadata_dst allocation fails

In the Linux kernel, the following vulnerability has been resolved: ipip: fix skb leak in collect_md mode when metadata_dst allocation fails In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv() and tunnelmpls4_rcv() read the zero return as "the packet has been consumed" and do not free it either. The skb is leaked. The other tunnel drivers all dispose of the packet at this point: ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return PACKET_REJECT, which makes gre_rcv()

• Actualiza a 6.1.190-1