hwmon: (lm90) Only report alarms if driver is ready
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Only report alarms if driver is ready
Userspace can read sysfs attributes before driver registration is complete,
immediately after devm_hwmon_device_register_with_info() has been called.
At that time, data->hwmon_dev is not yet initialized. This can trigger
a NULL pointer access since lm90_update_device() and with it
lm90_update_alarms_locked() will be called. This call schedules
report_work and lm90_report_alarms(), which passes the still-NULL
data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer
dereference.
Fix the problem by only scheduling
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nzxt-smart2) DMA-align output buffer
Sashiko reports:
When send_output_report() calls hid_hw_output_report(), the underlying USB
HID core calls usb_interrupt_msg() which maps this buffer directly for DMA.
When the DMA mapping flushes or invalidates the cacheline, it will corrupt
the adjacent variables (mutex, update_interval) that were modified
concurrently by the CPU. This causes memory corruption due to cacheline
sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA
API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings
for th
net: do not send ICMP/NDISC Redirects when peer allocation fails
In the Linux kernel, the following vulnerability has been resolved:
net: do not send ICMP/NDISC Redirects when peer allocation fails
When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry
under memory pressure or tree size caps, redirect handlers previously fell
back to sending un-rate-limited ICMP/NDISC Redirect messages.
In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL.
In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into
inet_peer_xrlim_allow(), which returned true when peer == NULL.
Because ICMP/NDISC Redirects are not part of the default global rate limit
mask (sysct
hwmon: (nct6775-core) Prevent access to unsupported weight registers
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775-core) Prevent access to unsupported weight registers
Sashiko reports:
During initialization of the nct6116 chip, the driver sets data->pwm_num
to 5. However, it assigns several NCT6106 register arrays (such as
NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and
NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP.
These arrays only contain 3 elements.
In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If
data->has_pwm has bits 3 or 4 set (which is structurally possible for
nct6116), the loop attempts to read eleme
In the Linux kernel, the following vulnerability has been resolved:
forcedeth: fix UAF of txrx_stats in nv_remove
nv_remove() frees the per-CPU txrx_stats before unregister_netdev().
Until unregister completes, ndo_get_stats64, the NAPI/xmit data path,
and nv_close()/drain may still access txrx_stats, leading to a
use-after-free.
Free the stats only after unregister_netdev().
hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread
When userspace configures 'auto_update_interval' to 0 via sysfs, the
background kthread executes schedule_timeout_interruptible(0), which
returns immediately.
If 'num_temp_sensors' is concurrently or previously set to 0, the
msleep_interruptible() delay inside adt7470_read_temperatures() also
becomes 0. This combination forces the background thread into a tight,
unbounded busy-loop, hogging the CPU and flooding the I2C bus with a
continuous stream of transactions.
Fix this vulnerability by raising the lower
hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read
If the fan data becomes 0 between the FAN_DATA_VALID() check and the
FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash
due to a race with a concurrent update of the cached fan value.
Fix a TOCTOU issue by reading fan data once.
rtase: fix double free of multi-frag skb on DMA map failure
In the Linux kernel, the following vulnerability has been resolved:
rtase: fix double free of multi-frag skb on DMA map failure
In rtase_start_xmit(), when the head buffer DMA mapping fails after
rtase_xmit_frags() has mapped all fragments, the error path clears
the fragment descriptors with rtase_tx_clear_range(), which frees
the skb through the last-frag slot and accounts tx_dropped. Control
then falls through to the common error label, which frees the same
skb a second time and counts it again.
Return right after clearing the fragments when the skb owns frags;
the no-frag case still drops through and frees the head skb once.
net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds
u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char,
0-255) into the kernel knode object without bounds validation. When a
packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates
`ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit
value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior
per C11 6.5.7p3, triggerable by an unprivileged user via user/network
namespaces.
UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43
shift exp
net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister()
In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister()
syzbot reported a memory leak [1] in the UDP tunnel NIC offload code.
When device registration fails (e.g. in register_netdevice()), netdev core
unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued
during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister()
returns early:
if (utn->work_pending)
return;
Because failed registrations do not enter netdev_wait_allrefs_any(), no
subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the
struct udp_tun
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
Fix the handling of folio_queue allocation failure in writeback by adding a
mempool and passing in gfp_t flags to the rolling buffer functions that
allocate memory, using the mempool if gfp != GFP_KERNEL.
This is then extended upwards and the gfp to be used for a request is stored
in the netfs_io_request struct and is then used for both requests and
subrequests, eliminating the sleeping loops there.
The failure caused:
folio != NULL
WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 f
Bluetooth: ISO: clear iso_data always when detaching conn from hcon
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: clear iso_data always when detaching conn from hcon
When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is
necessary, otherwise later iso_conn_free() will UAF.
Fix clearing of iso_data in iso_sock_disconn()
Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on
iso_sock_release() followed by hci_abort_conn_sync().
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp
l2cap_le_connect_rsp() obtains a channel via
__l2cap_get_chan_by_ident() but neither holds a reference nor uses
l2cap_chan_hold_unless_zero() before locking and operating on it.
A concurrent l2cap_chan_del() triggered by a remote disconnect can
free the channel between the lookup and l2cap_chan_lock(), causing
a use-after-free.
The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler
l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero()
to safely hold a reference, but l2cap_le_connect_rsp() was left
unp
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: lock sk in iso_connect_ind
Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the
"ev3" part of iso_connect_ind. It may also be NULL if socket has
transitioned away from the LISTEN/CONNECT states before locking.
Fix by adding lock/release. Recheck hcon is valid after lock acquire
where needed.
Bluetooth: ISO: hold sk properly in iso_conn_ready
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: hold sk properly in iso_conn_ready
sk deref in iso_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk is currently
accessed without either:
[Task 1] [Task 2]
iso_sock_release
iso_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
iso_sock_kill(sk)
UAF on sk deref
Fix possible UAF by holding sk refcoun
Bluetooth: ISO: fix leaking sk after socket release
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix leaking sk after socket release
iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket ||
sock_flag(sk, SOCK_DEAD) for early return, but this is always true since
sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket
always leaks, iso_sock_destruct is never called.
The socket reference also leaks when __iso_sock_close() does not set
SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after
zapping.
Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for
something else, and lock_sock to ensure iso_so
Bluetooth: ISO: avoid deadlocks in iso_sock_timeout
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid deadlocks in iso_sock_timeout
iso_sock_timeout() takes lock_sock, so sync disabling the timer while
holding that lock may deadlock.
iso_sock_timeout() may also run concurrently with iso_conn_del(), which
leads to UAF
[Task 1] [Task hdev->workqueue]
iso_sock_timeout iso_conn_del
iso_conn_hold_unless_zero iso_chan_del
`------------> iso_conn_put
caller frees hcon
iso_conn_put
iso_conn_free
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix refcounting of iso_conn
iso_conn_del() and iso_chan_del() have a race that results to double-put
of iso_conn:
[Task hdev->workqueue] [Task 2]
iso_conn_del iso_chan_del
iso_conn_hold_unless_zero iso_conn_lock
iso_conn_lock conn->sk = NULL
iso_conn_unlock
sk = iso_sock_hold(conn) <---------´
if (!sk) iso_conn_put iso_conn_put
iso_conn_put /* UAF */
The extra put for !sk in iso_conn_del() is currently required since
failing
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free()
Bluetooth: btintel: Validate length before parsing diagnostics TLV
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: Validate length before parsing diagnostics TLV
btintel_diagnostics() accesses tlv->val[0] without first validating
that the diagnostics VSE is long enough to contain that field, so
may cause reading data beyond the received frame.
Fix by validating the length before access.