Vulnerabilidades de linux · Página 29

s390/boot: Avoid IPL parameter append past command line

In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid IPL parameter append past command line A command line may occupy all but the terminating byte of COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size to the IPL parameter conversion helpers and points the destination one byte past early_command_line. The helpers subtract one from the unsigned size and write the converted parameter outside the command line buffer. Convert the IPL parameter in the command line parsing buffer first. A parameter beginning with '=' can then replace the existing command line regardless of its length, while

• Actualiza a 6.12.113-1

net: icmp: avoid invalid transport header access in icmp_send tracepoint

In the Linux kernel, the following vulnerability has been resolved: net: icmp: avoid invalid transport header access in icmp_send tracepoint syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE(): WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline] WARNING: at udp_hdr include/linux/udp.h:23 [inline] WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 Call trace: skb_transport_header include/linux/skbuff.h:3087 [inline] udp_hdr include/linux/udp.h:23 [inline] do_trace_event_raw_event

• Actualiza a 6.12.111-1

net: iptunnel: fix stale transport header during tunnel decapsulation

In the Linux kernel, the following vulnerability has been resolved: net: iptunnel: fix stale transport header during tunnel decapsulation Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale transport_header offset after tunnel decapsulation. BUG: unable to handle page fault for address: ffffed102091a42e Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__asan_load2 <IRQ> qdisc_pkt_len_segs_init (net/core/dev.c:4145) __dev_queue_x

• Actualiza a 6.12.111-1

s390/ipl: Fix NULL deref in kdump without re-IPL parm block

In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in kdump without re-IPL parm block Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case, reipl_type_init() selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL. kdump passes the re-IPL parameter block to the dump kernel through os_info. Before commit 3b9678472bab ("s390/ipl: correct kdump reipl block checksum calculation"), the os_info entry was added only for IPL types which initialized reipl_block_actual. That commit moved the os_info update to machine_crash_shutdown(), maki

• Actualiza a 6.12.111-1

s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block

In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passes the re-IPL parameter block through os_info, the stand-alone dump passes it through the IPL parm block address and checksum in lowcore. Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case reipl_type_init() selects IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless, dump_reipl_run() unconditionally dereferences it when preparing the lowcore fields. This may happen to work by chance when address zero conta

• Actualiza a 6.12.111-1

locking/lockdep: Invalidate stale class_cache entries for zapped classes

In the Linux kernel, the following vulnerability has been resolved: locking/lockdep: Invalidate stale class_cache entries for zapped classes syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in hlock_class() due to an invalid class_idx: WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203 Workqueue: wg-crypt-wg0 wg_packet_tx_worker RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline] RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203 Call Trace: <IRQ> lock_acquire+0x106/0x3

• Actualiza a 6.12.111-1

af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer. Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait in unix_stream_read_generic() if recv() is blocking and the last skb in the queue is MSG_OOB skb. In such a situation, TCP returns 0 immediately regardless of blocking or non-blocking. Let's follow the behaviour.

• Actualiza a 6.12.111-1

net: ipv4: Fix UDP length overflow with PMTU discover and big MTU

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce: 1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will be set to that MTU in ip_setup_cork. 2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be set to device MTU (cork->fragsize) in

Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so tfd_index == txq->count is already out of range. Change the guard in btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'. This issue was reported by Claude Mythos.

• Actualiza a 6.12.111-1

drm/amdgpu: skip gfx switch_power_profile during GPU reset

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip gfx switch_power_profile during GPU reset During resume from GPU reset, the gfx idle work may invoke switch_power_profile before the reset completes. This causes the following assert error because the register access occurs without first releasing the GPU reset semaphore: [ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0 [ 1576.768940] Call Trace: [ 1576.768944] <TASK> [ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu] [ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu] [ 1576.769437] smu_cmn_send_smc_msg_with_param

exec: do_close_on_exec() before taking exec_update_lock

In the Linux kernel, the following vulnerability has been resolved: exec: do_close_on_exec() before taking exec_update_lock do_close_on_exec() currently happens while holding the exec_update_lock, which is used in a lot of places that access process state to synchronize access checks. I recently added another such use of exec_update_lock, causing a regression. do_close_on_exec() can block waiting for a reply from a filesystem. That means a hung filesystem can block codepaths that use exec_update_lock; and it also means that a FUSE filesystem which attempts to inspect the calling process can deadlock. To avoid such problems, move do_close_

• Actualiza a 6.12.111-1

s390/crypto: Fix skcipher_walk return code handling in aes_s390

In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix skcipher_walk return code handling in aes_s390 The return codes from skcipher_walk_virt() were not properly checked before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt(). If skcipher_walk_virt() fails, the walk structure may be in an undefined state, and attempting to process data could lead to incorrect behavior or accessing uninitialized memory. Add proper return code checking to ensure correct handling of the walk initialization and walk advance and eventually return to the caller with that return code.

• Actualiza a 6.12.111-1

scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot For QLAFX00 the request ring is ioremapped device I/O memory (ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest of the FX00 path accesses it through memcpy_toio() and the wrt_reg_* helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a plain memset(). On architectures such as ARM64 a regular memset() may emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are invalid on Device memory, leading to a synchronous external abort. Use memset_io() to clear the slot

• Actualiza a 6.12.113-1

bpf: Fix out-of-bounds read of sk_protocol in bpf_sock_destroy()

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds read of sk_protocol in bpf_sock_destroy() sk_protocol lives in struct sock, not in struct sock_common. A timewait or request sock handed to bpf_sock_destroy() by the tcp iterator is neither, so reading sk->sk_protocol runs past the object: ================================================================== BUG: KASAN: slab-out-of-bounds in bpf_sock_destroy+0xc7/0xe0 Read of size 2 at addr ffff8881047d11b4 by task test_progs/428 Tainted: [W]=WARN Call Trace: <TASK> dump_stack_lvl+0x91/0xf0 print_report+0xd1/0x630 kasan_report+0xf3/0x130 __asan_re

• Actualiza a 6.12.113-1

bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL

In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL An LWT_SEG6LOCAL program can invalidate its cached SRH with bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter may reallocate skb->head, leaving the per-CPU SRH pointer dangling. Post-program SRH validation then writes through that pointer. Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier rejects this unsafe helper combination. Other LWT program types continue to expose the helper through lwt_out_func_proto().

• Actualiza a 6.12.113-1

bpf: Reject dev-bound-only programs on other devices

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject dev-bound-only programs on other devices __bpf_offload_dev_match() falls back to comparing offdev pointers after an exact netdev mismatch. Bound-only programs normally have NULL offdevs, so unrelated netdevs compare equal. A bound-only program on an offload-registered netdev can instead inherit a real offdev and match a sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs specialized for the bound driver on the target driver's xdp_buff. Running a veth-bound program on tun reads

• Actualiza a 6.12.113-1

veth: manage XDP program pointers during channel resize

In the Linux kernel, the following vulnerability has been resolved: veth: manage XDP program pointers during channel resize veth_set_channels() tears down XDP resources for removed RX queues without clearing rq->xdp_prog. If the program is then detached or replaced, those queues keep the old pointer after bpf_prog_put(). A later channel increase can re-enable NAPI and run the freed program. BUG: unable to handle page fault for address: ffffc90000256048 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: veth_xdp_rcv_skb (include/linux/filter.h:779 include/net/xdp.h:696 drivers/net/veth.c:820) Call Trace: veth_xd

• Actualiza a 6.12.113-1

net/sched: reject IDR error pointers when deleting actions

In the Linux kernel, the following vulnerability has been resolved: net/sched: reject IDR error pointers when deleting actions tcf_action_delete() drops the reference held by its lookup before calling tcf_idr_delete_index() with the saved action index. An unlocked classifier can remove that action and reserve the same IDR slot with ERR_PTR(-EBUSY) in between. tcf_idr_delete_index() only checks the lookup result for NULL. It therefore treats the reservation as a tc_action and dereferences tcfa_bindcnt. A hardware execution breakpoint was used to schedule the interleaving without changing the kernel source. KASAN reported this decoded tr

• Actualiza a 6.12.113-1

netfilter: ip6t_rpfilter: reject routes without inet6_dev

In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rpfilter: reject routes without inet6_dev ip6_route_lookup() can return an error-free route whose rt6i_idev is NULL. Lowering an external nexthop device's MTU below IPV6_MIN_MTU tears down its inet6_dev while fib6_ifdown() leaves routes using nexthop objects in the FIB. An unprivileged user can construct this state with rtnetlink in a private user and network namespace, then trigger a NULL dereference through an IPv6 rpfilter lookup: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0

• Actualiza a 6.12.113-1

bpf: Skip unsettled links in link iterator

In the Linux kernel, the following vulnerability has been resolved: bpf: Skip unsettled links in link iterator bpf_link_prime() inserts a link into link_idr before anon_inode_getfile() succeeds and before bpf_link_settle() publishes the ID in link->id. bpf_link_by_id() treats such an ID-zero link as unsettled, but the link iterator takes a reference without this check. If anon_inode_getfile() then fails, the creator removes the ID and frees its still-private link directly. The iterator is left with a dangling reference and its next bpf_link_put() accesses freed memory. Treat ID-zero entries as transient in bpf_link_get_curr_or_next(), ju

• Actualiza a 6.12.113-1