In the Linux kernel, the following vulnerability has been resolved:
nvdimm: pmem: keep PREFLUSH before data writes
pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the
bio data and can later overwrite the error with a successful REQ_FUA flush.
That lets data writes run after a failed preflush and can complete the bio
successfully despite the failed ordering barrier.
Run the REQ_PREFLUSH flush synchronously before touching the bio data and
complete the bio with the flush error if it fails. Keep asynchronous flush
chaining for REQ_FUA. At that point, data copy has completed and the parent
bio can wait for the chained flu
staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init()
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init()
padapter->HalData is allocated via vzalloc(), but incorrectly freed
using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to
release this vmalloc-backed buffer can lead to memory corruption.
Use rtw_hal_data_deinit() to pair the free correctly and free
HalData with vfree().
The bug was first flagged by an experimental static analysis tool we
are developing for kernel memory-management bugs. Manual inspection
confirms that the issue is still present in current mainline.
An x86_64 allyes
usb: typec: ucsi: unregister debugfs entries on teardown
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: unregister debugfs entries on teardown
ucsi_register() creates per-instance debugfs entries, but
ucsi_unregister() keeps them around until ucsi_destroy().
Drivers like ucsi_glink that unregister/register the same UCSI
instance across remoteproc restart then try to create an already
existing debugfs directory and log:
debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi'
Unregister debugfs entries as part of ucsi_unregister(), and
clear ucsi->debugfs after freeing it so repeated unregister
paths remain safe.
wifi: iwlwifi: mei: pass correct argument to function
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: pass correct argument to function
The first argument to iwl_mei_write_cyclic_buf() should be the cldev
but the q_head pointer is passed instead. Fix it.
Media · CVSS 5.7EPSS 0,15%Sin corrección publicada
drm/msm: Recover HW before retire hung submit
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Recover HW before retire hung submit
During recovery, it is not safe to retire the hung submit before we
recover the GPU. Retiring the submit triggers BO free and that can
result in GPU pagefaults since the GPU may be actively accessing those
BOs.
To fix this, retire the submits after gpu recovery is complete in
recover_worker().
Patchwork: https://patchwork.freedesktop.org/patch/730655/
staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths
issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management
xmit_frame together with its xmit_buf from the driver's fixed-size
management-TX pools via alloc_mgtxmitframe(). On the normal path the frame
is handed to dump_mgntframe(), which transfers ownership and eventually
returns both objects to their pools (the frame and, for beacons, the buf
in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion
path).
Several error/edge paths return early after a successful
allo
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix srpt_alloc_rw_ctxs() unwind counters
When srpt_alloc_rw_ctxs() fails partway through a multi-buffer indirect
descriptor, the unwind path destroys RDMA contexts but leaves stale
n_rw_ctx and n_rdma values (and a dangling rw_ctxs pointer). Later
sq_wr_avail accounting in srpt_queue_response() or srpt_write_pending()
can then subtract the wrong number of send queue credits.
Reset the counters and clear rw_ctxs after freeing the heap
allocation before returning an error.
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_refcount field as unique
BPF_REFCOUNT is not marked as a unique field, while it should be. Fix
this oversight.
In the Linux kernel, the following vulnerability has been resolved:
ACPI: platform: Use acpi_bus_get_primary_device()
The acpi_get_first_physical_node() usage in acpi_platform_fill_resource()
and acpi_create_platform_device() is generally unsafe because in theory
the device returned by it may be freed at any time [1].
It is also inefficient because acpi_get_first_physical_node() is called
multiple times for the same argument which can be avoided.
Address these issues by using acpi_bus_get_primary_device() instead of
acpi_get_first_physical_node() and adjusting the code to call it just
once at the beginning of and acpi_create_platform_devi
net: hsr: free learned nodes on device setup failure
In the Linux kernel, the following vulnerability has been resolved:
net: hsr: free learned nodes on device setup failure
hsr_dev_finalize() can fail after a lower-device RX handler has
already been registered (slave A is added before the failable slave B
and interlink adds). RX handlers run in softirq regardless of the
master's state, so frames received in that window can learn dynamic
nodes into node_db, and the error unwind never releases them.
Free both owned dynamic databases in the unwind, mirroring
hsr_dellink(). proxy_node_db is provably empty on every current error
exit (only interlink RX feeds it, and the interlink add is the last
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details?
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: validate CLC firmware records
The CLC region is supplied by firmware, but the loader trusts the
region count and each record length. A malformed image can make the
region table pointer precede the firmware buffer, make the record loop
fail to advance, or index phy->clc past its end. Validate the table and
record bounds before dereferencing or copying.
ppp_async: drop the errored frame instead of resetting its headroom
In the Linux kernel, the following vulnerability has been resolved:
ppp_async: drop the errored frame instead of resetting its headroom
ppp_receive_nonmp_frame() prepends a two-byte direction tag before running
the pass/active BPF filters:
*(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG);
Nothing on the receive path guarantees those two bytes of headroom. The
frame-error path in ppp_async's process_input_packet() resets a reused skb's
headroom to zero while claiming to restore it to a freshly allocated state -
but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD:
err:
if (skb) {
/* make skb appear as freshly allocat
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
In the Linux kernel, the following vulnerability has been resolved:
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU.
drm/virtio: use the DMA API for resource backing on Xen
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api
accel/qaic: Address potential out-of-bounds read in resp_worker()
In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Address potential out-of-bounds read in resp_worker()
Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the
owner went away")' fixes the scenario it was intended for by walking the
message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it
skipped over the bounds checking code that is included in decode_message().
This could lead to issues such as reading past the slab allocation's end,
infinite loops or kernel panics. For those issues to happen, a malformed
wire message is needed to be sent from the device.
Instead of duplica
In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix -EIO cleanup order in queue_rq
On -EIO, the RDMA queue_rq path reports a host path error and then
still cleans up the command and unmaps the SQE DMA. The path error
helper completes the request, so that is double cleanup and DMA unmap
after the request is already complete.
Unmap the SQE first, then report the host path error. Skip the outer
command cleanup on that path.
nvmet-rdma: fix queue leak when connect backlog is exceeded
In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix queue leak when connect backlog is exceeded
When pending disconnecting queues exceed the backlog limit, the
connect path only drops the device reference and leaks the newly
allocated queue and its IB resources.
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
Take the following unprivileged program as an example:
r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */
...
14: r0 += r1 /* r1 is a bounded scalar */
15: r9 = r0
Loading it triggers a verifier warning from reg_bounds_sanity_check():
verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out
of sync with range bounds r64={.base=0x0, .size=0x0}
r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0)
What happens:
1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(),
Media · CVSS 5.5EPSS 0,11%Sin corrección publicada
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit