Vulnerabilidades de linux · Página 78

power: supply: isp1704_charger: cancel work on remove

In the Linux kernel, the following vulnerability has been resolved: power: supply: isp1704_charger: cancel work on remove The USB notifier and initial VBUS detection can schedule isp->work. The remove path unregisters the notifier and power supply, but does not wait for queued or running work before tearing down the power supply state. Cancel the work after unregistering the notifier. Do this before unregistering the power supply. This issue was found by a static analysis tool.

• Actualiza a 6.12.111-1

power: supply: sc2731_charger: cancel work on remove

In the Linux kernel, the following vulnerability has been resolved: power: supply: sc2731_charger: cancel work on remove The USB notifier and initial charger detection can schedule info->work. The remove path unregisters the notifier, but does not cancel queued or running work before the devm-allocated driver data is released. Set the platform drvdata used by remove, then cancel the work after unregistering the notifier. This issue was found by a static analysis tool.

• Actualiza a 6.12.111-1

bpf: Fix potential UAF in bpf_netns_link_update_prog

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF in bpf_netns_link_update_prog In bpf_netns_link_update_prog, the checks for old_prog and prog type are currently performed locklessly before acquiring netns_bpf_mutex. This creates a race condition that can lead to a UAF issue. If two threads concurrently execute BPF_LINK_UPDATE on the same netns link, the following execution path can trigger a UAF: CPU0 CPU1 bpf_netns_link_update_prog if (old_prog && old_prog != link->prog) return -EPERM; bpf_netns_link_upd

• Actualiza a 6.12.111-1

bpf: Fix potential UAF when reading bpf link info

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF when reading bpf link info In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is accessed without holding any locks. If the prog is concurrently replaced via bpf_link_update, the old prog can be freed, leading to a potential UAF issue. Fix this by accessing link->prog under RCU protection to safely fetch the pointer and guarantee its lifetime while reading its fields.

• Actualiza a 6.12.111-1

lib/test_hmm: fail dmirror_fault() when the mirrored mm is gone

In the Linux kernel, the following vulnerability has been resolved: lib/test_hmm: fail dmirror_fault() when the mirrored mm is gone dmirror_fault() is called from the dmirror_read() and dmirror_write() retry loops after dmirror_do_read() or dmirror_do_write() finds a missing device page table entry. If the mirrored mm has already exited, mmget_not_zero() fails. The current code returns 0 in that case, which tells the caller that faulting succeeded even though no page was faulted and no device page table entry was installed. The caller then retries the same address, hits -ENOENT again, and can loop forever without making progress. Return

• Actualiza a 6.12.111-1

md/bitmap: resume array on backlog_store() error path

In the Linux kernel, the following vulnerability has been resolved: md/bitmap: resume array on backlog_store() error path backlog_store() suspends the array before checking whether a write-mostly device exists. If no such device exists, the error path only unlocks reconfig_mutex and leaves the array suspended, blocking subsequent I/O. Use mddev_unlock_and_resume() to release both states.

• Actualiza a 6.12.111-1

md: scope memalloc_noio to allocation critical sections

In the Linux kernel, the following vulnerability has been resolved: md: scope memalloc_noio to allocation critical sections Storing a memalloc_noio_save() token in mddev->noio_flags lets one task save the token and another task restore it. With concurrent suspend sysfs writes, task A can enter PF_MEMALLOC_NOIO, return to userspace still in that scope, and later task B can restore A's saved token. Avoid tying the token lifetime to mddev. Keep mddev_suspend() and mddev_resume() only responsible for array suspension, and enter PF_MEMALLOC_NOIO only in the MD paths that allocate memory after the array has been suspended. Restore the token befo

• Actualiza a 6.12.111-1

iommu/dma: Check atomic pool allocation result directly

In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Check atomic pool allocation result directly The non-blocking, non-coherent allocation path uses dma_alloc_from_pool(), which returns the allocated page and fills cpu_addr only on success. Do not rely on cpu_addr to detect allocation failure in this path. Check the returned page directly before using it for the IOMMU mapping.

• Actualiza a 6.12.111-1

swiotlb: Preserve allocation virtual address for dynamic pools

In the Linux kernel, the following vulnerability has been resolved: swiotlb: Preserve allocation virtual address for dynamic pools swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the atomic pool is backed by remapped virtual addresses, which are not the same as the direct-map addresses returned by phys_to_virt(). swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address from the physical start address. For atomic-pool backed allocations this stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes that address to d

• Actualiza a 6.12.111-1

i3c: dw: avoid shift-out-of-bounds when DAA assigns no devices

In the Linux kernel, the following vulnerability has been resolved: i3c: dw: avoid shift-out-of-bounds when DAA assigns no devices On an empty bus ENTDAA assigns nothing, so cmd->rx_len (the count of addresses left unassigned) equals master->maxdevs. The GENMASK() index master->maxdevs - cmd->rx_len - 1 then becomes -1, which trips up UBSAN. This happens every time on boot on a Gigabyte/AMD server: UBSAN: shift-out-of-bounds in drivers/i3c/master/dw-i3c-master.c:905:12 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 7 UID: 0 PID: 963 Comm: (udev-worker) Not tainted 7.0.11-200.fc44.x86_64 #1 PREEMPT(lazy

• Actualiza a 6.12.111-1

md/raid1: create serial pool adding rdev to array with serialize_policy=1

In the Linux kernel, the following vulnerability has been resolved: md/raid1: create serial pool adding rdev to array with serialize_policy=1 The following bug has been observed with kernel 7.1.3 after adding a new rdev to an existing RAID1 array with serialize_policy enabled: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 19639 Comm: ext4lazyinit Not tainted 7.1.3-1-default RIP: _raw_spin_lock_irqsave+0x27/0x50 CR2: 0000000000004960 Call Trace: wait_for_serialization+0xb9/0x260 [raid1] raid1_make_request+0x762/0xaff [raid1] md_handle_request+0x1c9/0x2e0 [md_mod] The raid1.c code calls wait_for_serialization() if the MD_SERIALIZE_P

• Actualiza a 6.12.111-1

misc: sgi-gru: remove interrupt-context page-table walks

In the Linux kernel, the following vulnerability has been resolved: misc: sgi-gru: remove interrupt-context page-table walks The GRU TLB miss handler walks a process's page tables without holding page-table locks or a reference to the mapped page. It also uses a kernel page-table accessor on user page tables and supports only PMD-level large mappings on x86-64. Remove the direct walker. Send interrupt faults directly to user polling mode so the existing call-OS fallback retries them in process context. Remove the mmap-lock failure statistic that can no longer be incremented.

• Actualiza a 6.12.111-1

wifi: mt76: mt76x02: do not WARN on invalid rx descriptor length

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt76x02: do not WARN on invalid rx descriptor length The MPDU length in the rx descriptor comes from the hardware. In monitor mode with the fcsfail filter enabled, the hardware passes up corrupted frames, and a corrupted frame can report a length larger than the received buffer. The bounds check correctly discards such frames, but its WARN_ON_ONCE wrapper means any over-the-air garbage frame taints the kernel, and panics it on the first such frame when panic_on_warn is set. Drop the WARN and discard the frame silently, matching what commit c2d4c8723dbf ("mt76x2

• Actualiza a 6.12.111-1

wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete A use-after-free issue occurs in mt76_rx_poll_complete due to a race condition. The STA has already been removed, but the rx_status still had a pointer to the wcid in the STA. Set the links' wcid pointers to be NULL for a MLD in mt7925_sta_pre_rcu_remove() BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470 Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc8 print_report+0x1b8/0x710 kasan_report+0xe0/0x144 do_bad_area+0x120/0x260 do_tag_check_fault+0x20/0x34 do_mem_

• Actualiza a 6.12.111-1

wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 00

wifi: mt76: mt792x: Fix memory leak in SDIO TX path

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: Fix memory leak in SDIO TX path When tx_prepare_skb() returns an error in the SDIO TX path, the skb is not freed, leading to a memory leak. This can occur when zero-length frames (such as WNM NULL frames) are dropped to prevent potential hardware TX hangs. Fix this by properly releasing the skb with ieee80211_tx_status_ext() when tx_prepare_skb() fails.

• Actualiza a 6.12.111-1

wifi: mt76: fix non-AQL packet accounting for MLO stations

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix non-AQL packet accounting for MLO stations __mt76_tx_queue_skb() overrides the wcid passed by the driver with sta->drv_priv, so the wcid might incorrectly be changed after TX, causing wcid->non_aql_packets to be counted on the wrong wcid. For example, on the AP side, if a station's setup link is the 5G link and the station uses 2G to transmit a frame, the value of non_aql_packets is increased on the 5G wcid but decreased on the 2G wcid. Once the inflated counter exceeds MT_MAX_NON_AQL_PKT, the TX scheduler permanently refuses to service the station. Drop th

• Actualiza a 6.12.111-1

wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[]

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid().

• Actualiza a 6.12.111-1

wifi: mt76: mt7915: clear wcid mask under mutex after RCU pointer clear

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: clear wcid mask under mutex after RCU pointer clear mt7915_remove_interface() cleared the wcid mask bit with no lock held and before clearing the RCU wcid pointer. The mask is a non-atomic RMW shared with the allocators, which all run under dev->mt76.mutex; on DBDC the two wiphys share one mt76_dev, so this raced add_interface/sta_add on the other band and could leak or double-hand-out a wcid. Clearing the bit before the RCU pointer also let a concurrent allocation reuse the index and publish its wcid, which the subsequent NULL assignment then wiped. Mov

• Actualiza a 6.12.111-1

wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss If a peer's VHT/HE MCS map has no supported spatial stream (all fields 0x3), the loop exits with nss == 0 and the function returned (u8)-1 (255), which was then written into the firmware sta_rec_bf beamforming fields. Clamp the result to 0.

• Actualiza a 6.12.111-1