iio: light: apds9306: fix PM reference leak in apds9306_read_data()
In the Linux kernel, the following vulnerability has been resolved:
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
apds9306_read_data() calls pm_runtime_resume_and_get() but several
error paths return directly without calling pm_runtime_put_autosuspend(),
leaking the runtime PM reference and preventing the device from
autosuspending.
Use PM_RUNTIME_ACQUIRE_AUTOSUSPEND() and PM_RUNTIME_ACQUIRE_ERR() to
automatically handle runtime PM reference release on all return paths.
In the Linux kernel, the following vulnerability has been resolved:
iio: light: ltrf216a: fix runtime PM reference leak in error path
ltrf216a_get_lux() acquires a runtime PM reference by calling
ltrf216a_set_power_state(data, true). However, if
ltrf216a_read_data() fails, the function returns immediately without
dropping the reference.
This leaves the runtime PM usage count unbalanced, preventing the device
from autosuspending after a failed read.
Fix this by releasing the runtime PM reference before returning from the
error path.
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
When the device is enumerated through its ACPI HID (IFX3100),
i2c_client_get_device_id() returns NULL: the ACPI-derived client name
does not match the driver's i2c_device_id table. dps310_probe() then
dereferences that NULL pointer in "iio->name = id->name" and crashes the
kernel during probe.
The IIO device name is always "dps310", so set it directly and drop the
now-unused device-id lookup.
In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Always flush vpid02 on first use
Make sure vpid02 is always flushed on first use by setting last_vpid=0
when allocating vpid02. nested_vmx_transition_tlb_flush() will always
detect a VPID change on first VM-Enter after VMXON, because VPID=0 in
vmcs12 is not allowed if L1 enables VPID.
This avoids using stale TLB entries from a previous lifetime of the
VPID, that might have been associated with a different vCPU (or a
completely different VM).
Note that last_vpid is already being initialized as 0 when the vCPU is
created, but it is not reset when vpid02 is freed
KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit
In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit
Always check and clear KVM_REQ_GET_NESTED_STATE_PAGES when emulating a
nested VM-Exit to ensure the request is cleared, even when KVM was built
with CONFIG_KVM_HYPERV=n, as KVM subtly relies on the "check" to clear
the flag and thus avoid double-mapping the vmcs12 pages, e.g. if KVM
manages to bail from VM-Enter without processing the request, and then
emulates VMLAUNCH or VMRESUME.
KVM: nVMX: Service local TLB flushes on failed nested VM-Enter
In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Service local TLB flushes on failed nested VM-Enter
KVM services local TLB flushes on "full" nested VM-Exits (through
__nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to
failed VMCS checks in nested_vmx_enter_non_root_mode()).
However, it is possible that KVM had queued TLB flushes that need to be
performed, even if the nested VM-Enter was not successful. For example,
if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if
via the MSR load lists, as the SDM says:
If any MSR is being loaded in such a way that would architec
KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU
In the Linux kernel, the following vulnerability has been resolved:
KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU
When emulating INVVPID, KVM executes INVVPID on the physical CPU using
vpid02 (instead of the L1 assigned VPID), after doing some validations
on the operands. However, it is possible that the physical CPU KVM
executes INVVPID on is different from the CPU L2 is running on.
For example, in the following scenario:
- L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1)
- L1 migrates to CPU #2 and executes INVVPID
- KVM executes INVVPID on CPU #2
- L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02
KVM: x86/mmu: Consume the locked rmap value in the lockless rmap walk
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Consume the locked rmap value in the lockless rmap walk
__kvm_rmap_lock() deliberately elides the rmap lock when it observes an
empty rmap. In that case kvm_rmap_lock_readonly() also re-enables
preemption and returns zero, so the caller holds neither the rmap lock
nor a preemption reference. The elision documents the invariant it
relies on:
* Elide the lock if the rmap is empty, as lockless walkers (read-only
* mode) don't need to (and can't) walk an empty rmap, nor can they add
* entries to the rmap. I.e. the only paths that process empty rmaps
*
KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock
Fix an issue where userspace or the guest can program an Hyper-V
synthetic timer to have a deadline in the past via integer overflow,
preventing the CPU from making progress and triggering an RCU stall.
Hyper-V's SynIC exposes 4 per-vCPU synthetic timers to the
guest, which are emulated by KVM. Each is programmed through the
HV_X64_MSR_STIMERi_CONFIG and HV_X64_MSR_STIMERi_COUNT MSRs. Depending
on CONFIG, COUNT represents either the absolute expiration time or the
period of a periodic timer, both expressed in 100ns
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix length check __import_wp_info()
struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user
space. This is then assigned to wp_info->len, which is an int. The bounds
check is done on the truncated value while the allocation uses the
untruncated one:
wp_info->len = bp_data->len;
[...]
if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE)
return -EINVAL;
wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT);
Use the validated value for the allocation as intended. Without this
fix userspace can trigger >4GB allocations which will fai
KVM: s390: Fix memory leak in guest debug handling
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory leak in guest debug handling
bp_data is freed only for the error case by kfree(bp_data).
Every successful KVM_SET_GUEST_DEBUG will leak bp_data.
KVM: s390: Fix old_data leak in guest debug error path
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix old_data leak in guest debug error path
__import_wp_info() allocates a per-watchpoint old_data buffer to back up
the original guest memory contents. If a later watchpoint of the same
KVM_SET_GUEST_DEBUG request fails to import, kvm_s390_import_bp_data()
jumps to the error label, which frees the wp_info array but not the
old_data buffers of the entries that were imported successfully. Up to
MAX_BP_COUNT - 1 buffers of up to MAX_WP_SIZE bytes are leaked per failed
request, and the request can be repeated.
Create error handling for cleaning up all created old_d
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Free guest debug data on vcpu destroy
kvm_s390_clear_bp_data() is only called from
kvm_arch_vcpu_ioctl_set_guest_debug(), i.e. when user space changes or
disables debugging. A vCPU that is destroyed while hardware breakpoints
are still armed - the normal case when the VMM just exits or crashes -
leaks hw_bp_info, hw_wp_info and all old_data buffers, since generic KVM
frees the vCPU right after kvm_arch_vcpu_destroy().
That is bounded by MAX_BP_COUNT entries, so roughly 8 KiB per vCPU, but
it is unbounded over VM lifetimes. The allocations are
GFP_KERNEL_ACCOUNT,
KVM: s390: Take srcu when importing watchpoint data
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Take srcu when importing watchpoint data
__import_wp_info() backs up the original guest memory contents of a
watchpoint with read_guest_abs(), which is kvm_read_guest() and therefore
resolves the memslot via __kvm_memslots(). That requires kvm->srcu (or
kvm->slots_lock) to be held, otherwise a concurrent memslot update can
free the memslots array under us once its SRCU grace period has elapsed.
As this is not fast path, following lock ordering (mutex first, then
srcu) take the big hammer and hold the srcu for the full import.
KVM: s390: Zero initialize data structures for inject_pfault_token
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Zero initialize data structures for inject_pfault_token
__kvm_inject_pfault_token() only sets .type and .u.ext.ext_params2 of
the on-stack struct kvm_s390_irq but the full ext substructure is copied
into the cpu local variable on inject. ext_params and pad contain stale
stack values.
Interrupt delivery only uses ext_params2, so nothing leaks to the guest,
but a host user can use the migration ioctls to get to the data.
Fix by zero-initializing the irq struct.
Do the same for the inti data structure.
KVM: s390: Fix memory corruption by not reinjecting CK machine checks
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory corruption by not reinjecting CK machine checks
Channel-subsystem damage machine checks are for the host channel
subsystem. The guest channel subsystem is emulated in the userspace VMM.
There is no point in forwarding such machine checks into the guest.
This also simplifies the machine check reinjection and avoids kfree of a
stack variable as reported by sashiko. There might be still machine
checks that have the ck bit set with another bit (like instruction
damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and
ED bits already are.
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: keyop: use mmu_lock to read gmap->asce
Every other dat_* consumer in this file (kvm_s390_get_skeys,
set_skeys, get_cmma_bits, set_cmma_bits, MEM_CLR_CMMA,
kvm_s390_fixup_prefix, kvm_test_age_gfn, kvm_age_gfn) reads
kvm->arch.gmap->asce *inside* the mmu_lock read-side. keyop is the only
outlier.
gmap->asce is mutated under write_lock(mmu_lock) by gmap_set_limit()
and keyop might use a stale asce value for walking as KVM_S390_KEYOP
and KVM_S390_VM_MEM_LIMIT_SIZE can run concurrently. This can result
in memory corruption.
KVM: arm64: Correctly handle end of VA space TLBI invalidation
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly handle end of VA space TLBI invalidation
Our TLB invalidation by VA code is based on comparing two ranges,
one defined by the TLB, and one defined by the TLBI instruction.
Each range is defined by a start and a size. However, the way the
comparison is done doesn't account for address rollover, as it
compares an address with (base + size). This works nicely until
this expression represent the last page/block in the TTBR1 VA space,
as the result is a big fat 0. And a failed TLB invalidation.
Rewrite the comparison in a way that is immune to the address
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Handle VNCR TLB invalidation race with vcpu_put() VNCR unmapping
While VNCR TLB invalidation always occurs under the MMU lock,
vcpu_put() doesn't, while it unmaps the VNCR page.
The problem is that the invalidation evaluates vncr_tlb::cpu to
decide whether an unmapping needs to take place (cpu != -1) before
performing it. On the other hand, this_cpu_reset_vncr_fixmap()
unconditionally unmaps if L1_VNCR_MAPPED is set.
These two obviously can race, with a TOCTOU pattern on the TLBI
path, and a BUG_ON() on the vcpu_put() path. And the two can end-up
calling vncr_
KVM: arm64: Make VNCR invalidation participate in MMU invalidation retry
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Make VNCR invalidation participate in MMU invalidation retry
A VNCR TLB invalidation can occur on one vcpu while another vcpu is
faulting in this same page. Without correctly handling this, we can
end up with the following scenario:
- vcpu A walks the PTs to translate VNCR
- before vcpu A is able to grab the MMU lock to insert the TLB,
vcpu B updates the S1 PTs with an invalid entry, and issues
a TLBI S1E2 for this VA
- vcpu A inserts the TLB for something that is now invalid
This isn't a new problem, and we manage S2 by having the MMU notifier
to bump up