p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux · Página 23

Vulnerabilidades publicadas para linux en los últimos 30 días: 934. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 20005

  1. CVE-2026-98659

    Sin evaluarEPSS 0,2%Corrección disponible

    iio: pressure: rohm-bm1390: Return error when read fails

    In the Linux kernel, the following vulnerability has been resolved: iio: pressure: rohm-bm1390: Return error when read fails The data reading function ignores the cached error value, and unconditionally returns 0. Return cached 'ret' -value after stopping the measurement so user knows if read failed and data is garbage.

    • Actualiza a 7.2.10-1
    Publicación Actualización
  2. CVE-2026-98658

    Sin evaluarEPSS 0,2%Corrección disponible

    iio: proximity: aw96103: validate firmware data length

    In the Linux kernel, the following vulnerability has been resolved: iio: proximity: aw96103: validate firmware data length The firmware parser reads a length from the binary header and then uses it to walk six-byte register/value entries. A truncated firmware image can make the parser read beyond the copied firmware buffer. A value smaller than the four-byte count field also underflows, producing a very large length. Read the little-endian field with get_unaligned_le32(), as previously proposed by David Lechner. Validate the header size, reject an underflowed length, ensure the resulting payload is contained in the firmware image, and requ

    • Actualiza a 7.2.10-1
    Publicación Actualización
  3. CVE-2026-98657

    Sin evaluarEPSS 0,17%Corrección disponible

    iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure

    In the Linux kernel, the following vulnerability has been resolved: iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer, which only calls iio_triggered_buffer_cleanup() -- it does not undo the iio_device_register() that already succeeded a few lines above. probe() then returns the error, the devm-managed indio_dev is freed, but the iio core still has it registered: the sysfs/chardev nodes stay live and point at freed memory. Add an error_unreg_dev label that unregisters the iio device before falling through to the existing buffer cleanup, mir

    • Actualiza a 7.2.10-1
    Publicación Actualización
  4. CVE-2026-98656

    Sin evaluarEPSS 0,17%Corrección disponible

    iio: trigger: cancel reenable_work before freeing trigger

    In the Linux kernel, the following vulnerability has been resolved: iio: trigger: cancel reenable_work before freeing trigger iio_trigger_notify_done_atomic() defers ->reenable() into trig->reenable_work on the system workqueue, and the worker dereferences the owning trigger through container_of(). Nothing cancels this work before iio_trig_release() frees the trigger, so a worker armed by the last in-flight IRQ can outlive the free and touch freed memory. Cancel it at the top of iio_trig_release(), which every free path reaches through the device core's final put_device(). Found by an in-house static analysis tool.

    • Actualiza a 7.2.10-1
    Publicación Actualización
  5. CVE-2026-98655

    Media · CVSS 4.8EPSS 0,18%Corrección disponible

    perf: Require kernel access for text poke events

    In the Linux kernel, the following vulnerability has been resolved: perf: Require kernel access for text poke events Perf events with exclude_kernel=1 can be opened without kernel perf access. However, exclude_kernel does not suppress text-poke sideband records. Every PERF_RECORD_TEXT_POKE is marked PERF_RECORD_MISC_KERNEL and contains a raw kernel instruction address. An unprivileged task can therefore open and mmap a task-local software event with text_poke=1. Both opening a count-only tracepoint event and configuring UDP GRO for ESP-in-UDP cause updates to inline static calls; the observer receives the relocated addresses of the modifie

    • Actualiza a 7.2.10-1
    Publicación Actualización
  6. CVE-2026-98653

    Media · CVSS 4.6EPSS 0,15%Corrección disponible

    KVM: s390: Fix _gaccess_shadow_fault()

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix _gaccess_shadow_fault() In some circumstances, it is possible that the page of nested guest memory that is being shadowed is not present at all in the parent guest gmap. dat_entry_walk() will not find any leaf entry and return with -ENOENT, which will erroneously be propagated all the way to userspace. Fix by manually calling gmap_link() on the memory of the nested guest that is being shadowed if the mapping was not already present.

    • Actualiza a 7.2.9-1
    Publicación Actualización
  7. CVE-2026-98652

    Alta · CVSS 7.1EPSS 0,15%Corrección disponible

    KVM: s390: Add missing srcu in kvm_s390_set_irq_state()

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Add missing srcu in kvm_s390_set_irq_state() Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the kvm->srcu or the slots lock when performing the Store status operation. Fix by taking kvm->srcu in kvm_s390_set_irq_state().

    • Actualiza a 7.2.9-1
    Publicación Actualización
  8. CVE-2026-98651

    Alta · CVSS 8.2EPSS 0,15%Corrección disponible

    KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key()

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key() Some callers pass NULL as oldkey. Calling page_cond_set_storage_key() will cause that NULL pointer to get dereferenced. Fix by checking for NULL and assigning the pointer to a dummy local variable to avoid crashes.

    • Actualiza a 7.2.9-1
    Publicación Actualización
  9. CVE-2026-98650

    Media · CVSS 6.9EPSS 0,15%Corrección disponible

    KVM: s390: Fix potential races in dat skey functions

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix potential races in dat skey functions When dat_cond_set_storage_key() finds a large page, it will conditionally set the storage key in absolute memory using large_crste_to_phys() to get the absolute address. There is a race window between dat_entry_walk() and large_crste_to_phys(): the large page could have been split concurrently, and large_crste_to_phys() might be called with a crste that does not designate a large page, leading to crashes. Similar issues were also present in dat_set_storage_key(). dat_get_storage_key() and dat_reset_reference_bit() did

    • Actualiza a 7.2.9-1
    Publicación Actualización
  10. CVE-2026-98649

    Alta · CVSS 7.1EPSS 0,19%Corrección disponible

    KVM: s390: Fix race in _destroy_pages_crste()

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix race in _destroy_pages_crste() Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid dereferencing the pointer multiple times.

    • Actualiza a 7.2.9-1
    Publicación Actualización
  11. CVE-2026-98648

    Media · CVSS 5.8EPSS 0,17%Corrección disponible

    s390/uv: Prevent potential out-of-bounds read

    In the Linux kernel, the following vulnerability has been resolved: s390/uv: Prevent potential out-of-bounds read When the system has more than 85 secrets, the uv_secret_list struct array only holds up to 85 items per page, resulting in an out of bounds read in find_secret_in_page if the targeted secret is in the next page or not stored at all. Fix this by looping over the number of stored secrets which is the per sub-list count of stored secrets and not the overall count.

    • Actualiza a 7.2.9-1
    Publicación Actualización
  12. CVE-2026-98647

    Sin evaluarEPSS 0,17%Corrección disponible

    bpf: Fix divide-by-zero in btf_struct_walk()

    In the Linux kernel, the following vulnerability has been resolved: bpf: Fix divide-by-zero in btf_struct_walk() When an access goes past the struct and the last member is a flexible array, btf_struct_walk() folds the offset back into a single element with (off - moff) % t->size, but never checks that the element type has a size. BTF takes an empty struct, so this in program BTF /* event could be empty */ struct event { #ifdef HAVE_TIMESTAMP __u64 ts; #endif }; struct batch { int nr; struct event events[]; }; divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that is not MEM_ALLOC, e.g. a plain read of a

    • Actualiza a 7.2.9-1
    Publicación Actualización
  13. CVE-2026-98646

    Media · CVSS 4.6EPSS 0,17%Corrección disponible

    tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context

    In the Linux kernel, the following vulnerability has been resolved: tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If the sock is a listener that still has children in its accept queue, tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched() there trips the debug check: BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 locks held by test_progs/628: 3, last CPU#

    • Actualiza a 7.2.9-1
    Publicación Actualización
  14. CVE-2026-98645

    Media · CVSS 5.4EPSS 0,19%Corrección disponible

    HID: winwing: fix use-after-free in force feedback teardown

    In the Linux kernel, the following vulnerability has been resolved: HID: winwing: fix use-after-free in force feedback teardown winwing_init_ff() passes the driver's private data, allocated with devm_kzalloc() in winwing_probe(), as the effect context to input_ff_create_memless(). The memoryless force-feedback core takes ownership of that pointer and frees it with kfree() from input_ff_destroy() (ml_ff_destroy()) when the input device is destroyed. Freeing a devm-managed allocation with kfree() is an invalid free, and the same object is then released again by devres when the HID device is torn down, a double free. As the allocation also em

    • Actualiza a 7.2.9-1
    Publicación Actualización
  15. CVE-2026-98644

    Media · CVSS 6.8EPSS 0,21%Corrección disponible

    bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()

    In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch() __htab_map_lookup_and_delete_batch() has no rescheduling point. The batch count bounds how many entries are copied out, not how many buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the map end to end. The empty-bucket fast path is worse: it stays inside a single rcu_read_lock() / bpf_disable_instrumentation() section for any run of consecutive empty buckets. That holds up on small maps, but it falls apart at scale. On a 144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic BPF_MAP_LOO

    • Actualiza a 7.2.9-1
    Publicación Actualización
  16. CVE-2026-98643

    Media · CVSS 4.6EPSS 0,21%Corrección disponible

    bpf: Fix out-of-bounds read of rtt_min in sock_ops

    In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds read of rtt_min in sock_ops A sockops prog reading skops->rtt_min never checks the sk type: on the tcp_conn_request() path sock_ops->sk is a request_sock (non-full), and the ctx rewrite casts it to a tcp_sock (full) and reads rtt_min past the end of the request_sock, returning dirty adjacent memory. SEC("sockops") int prog(struct bpf_sock_ops *skops) { switch (skops->op) { case BPF_SOCK_OPS_RWND_INIT: leak = skops->rtt_min; /* reads the request_sock OOB */ ... } } For instance one such read returned rtt_min=0xffff8881, the high half

    • Actualiza a 7.2.9-1
    Publicación Actualización
  17. CVE-2026-98642

    Alta · CVSS 7.3EPSS 0,17%Corrección disponible

    bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk

    In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk Syzkaller repeatedly triggered UAF splats related to nodes in waiting_for_gp_ttrace within the bpf memalloc: BUG: KASAN: slab-use-after-free in llist_del_first+0x85/0x110 lib/llist.c:61 Read of size 8 at addr ffff8881572cd080 by task syz.4.470/5112 ... llist_del_first+0x85/0x110 lib/llist.c:61 alloc_bulk+0x193/0x460 kernel/bpf/memalloc.c:229 bpf_mem_refill+0x386/0x560 kernel/bpf/memalloc.c:436 Freed by task 14: ... __free_rcu kernel/bpf/memalloc.c:281 [inline] __free_rcu_tasks_trace+0x48/0xd0

    • Actualiza a 7.2.9-1
    Publicación Actualización
  18. CVE-2026-98641

    Alta · CVSS 7.1EPSS 0,17%Corrección disponible

    bpf, arm64: set up the frame pointer for the exception callback

    In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: set up the frame pointer for the exception callback A program acting as exception boundary saves all callee-saved registers, so build_prologue() takes the exception_cb path and never calls push_callee_regs(). That is the only place find_used_callee_regs() runs, and with it the only place ctx->fp_used is set, so the callback prologue does not emit the mov x25, sp that points BPF_REG_FP at the frame the callback runs on. x25 keeps whatever it held when bpf_throw() was called. If the throw came from a subprogram that uses its own BPF stack, that is the subprogr

    • Actualiza a 7.2.9-1
    Publicación Actualización
  19. CVE-2026-98640

    Media · CVSS 5.1EPSS 0,21%Corrección disponible

    HID: amd_sfh: Validate PCI BAR size before mapping

    In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Validate PCI BAR size before mapping The amd_sfh driver maps PCI BAR 2 using pcim_iomap_regions() and subsequently accesses MMIO registers at offsets up to 0x10958 (e.g., AMD_P2C_MSG3 at 0x1068C). However, the driver never validates that the BAR size is large enough to cover these accesses. If the driver is bound to a device with a smaller BAR 2, this leads to an out-of-bounds memory access and a page fault during the probe function. For example, a page fault can occur when reading from privdata->mmio + AMD_P2C_MSG3 in mp2_select_ops(): BUG: unable to hand

    • Actualiza a 7.2.9-1
    Publicación Actualización
  20. CVE-2026-98639

    Baja · CVSS 2.1EPSS 0,17%Corrección disponible

    KVM: riscv: Fix NACL hfence entry update order

    In the Linux kernel, the following vulnerability has been resolved: KVM: riscv: Fix NACL hfence entry update order The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE entry to be populated as follows: 1) find an unused entry with Config.Pending == 0 2) update the Page_Number and Page_Count words 3) update the Config word with Config.Pending set __kvm_riscv_nacl_hfence() writes the Config word first, so the SBI implementation (or NACL hardware) can observe a pending entry with pnum/pcount values left over from the previous use of that entry, resulting in incorrect TLB flush ranges. Write pnum and pcount first and the Confi

    • Actualiza a 7.2.9-1
    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →