p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux · Página 26

Vulnerabilidades publicadas para linux en los últimos 30 días: 934. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 20005

  1. CVE-2026-98598

    Media · CVSS 5.7EPSS 0,2%Corrección disponible

    ipv6: Prevent rt6_insert_exception() for dying fib6_info.

    In the Linux kernel, the following vulnerability has been resolved: ipv6: Prevent rt6_insert_exception() for dying fib6_info. Before the cited commit, fib6_nh_flush_exceptions() always set from->exception_bucket_flushed = 1 under rt6_exception_lock to prevent rt6_insert_exception() from inserting a new exception for a dying fib6_info. The flag was replaced with the FIB6_EXCEPTION_BUCKET_FLUSHED bit stored in nh->rt6i_exception_bucket. The problem is that now the bit is only set when the bucket is not NULL and fib6_nh_flush_exceptions() is called from fib6_nh_release() after fib6_ref has already reached zero. If rt6_insert_exception() is

    • Actualiza a 7.2.9-1
    Publicación Actualización
  2. CVE-2026-98597

    Media · CVSS 5.2EPSS 0,18%Corrección disponible

    net: usb: sr9700: include receive overhead in the length check

    In the Linux kernel, the following vulnerability has been resolved: net: usb: sr9700: include receive overhead in the length check The receive fixup subtracts the Ethernet CRC from the reported packet length, but compares that payload length against the whole remaining receive buffer. The following copy starts after the three-byte header, and the cursor advance consumes both that header and the four-byte CRC. Require the payload to fit after SR_RX_OVERHEAD before copying it or advancing to the next packet. The loop already ensures that the remaining buffer is larger than the overhead, so the subtraction is safe. The issue was found by our

    • Actualiza a 7.2.9-1
    Publicación Actualización
  3. CVE-2026-98596

    Media · CVSS 5.7EPSS 0,21%Corrección disponible

    ipv6: Fix dst leak for uncached routes.

    In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix dst leak for uncached routes. ip6_route_output_flags(), ip6_rt_put_flags(), and ip6_dst_check() detect an uncached route by list_empty(&rt->dst.rt_uncached), which replaced the static DST_NOCACHE flag check in commit a4c2fd7f7891 ("net: remove DST_NOCACHE flag"). When a device is unregistered, rt6_uncached_list_flush_dev() unlinks uncached routes tied to the device from rt6_uncached_list. Previously, they were moved to another list with list_move() (__list_del_entry() + list_add()), and since commit 98aa546af5e4 ("inet: remove (struct uncached_list)->quarantine"

    • Actualiza a 7.2.9-1
    Publicación Actualización
  4. CVE-2026-98595

    Media · CVSS 6.8EPSS 0,2%Corrección disponible

    udp: remove a disconnected socket from the 4-tuple hash table

    In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("

    • Actualiza a 7.2.9-1
    Publicación Actualización
  5. CVE-2026-98594

    Sin evaluarEPSS 0,22%Corrección disponible

    tg3: clean up PHYLIB resources on probe failure

    In the Linux kernel, the following vulnerability has been resolved: tg3: clean up PHYLIB resources on probe failure tg3_get_invariants() can register an MDIO bus and connect a PHY for USE_PHYLIB devices. If tg3_init_one() later fails, its common error path releases the mappings and netdev without undoing those PHYLIB resources. Disconnect the PHY and unregister the MDIO bus before the remaining teardown. Guard PHY cleanup with USE_PHYLIB to match tg3_phy_init(), and call tg3_mdio_fini() unconditionally to match tg3_mdio_init(). The existing IS_CONNECTED and MDIOBUS_INITED flags make both helpers safe when initialization only completed part

    • Actualiza a 7.2.9-1
    Publicación Actualización
  6. CVE-2026-98593

    Sin evaluarEPSS 0,17%Corrección disponible

    s390/debug: Fix NULL pointer dereference in debug_info_copy()

    In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix NULL pointer dereference in debug_info_copy() When debug_register_static() fails, it clears areas, active_pages and active_entries but leaves the area bounds unchanged. Copying such an area, either by opening its view file or via debug_dump(), makes debug_info_copy() dereference the NULL pointers. Skip the copy loop when the source has no areas.

    • Actualiza a 7.2.9-1
    Publicación Actualización
  7. CVE-2026-98592

    Media · CVSS 5.8EPSS 0,2%Corrección disponible

    net: spacemit: clear TX descriptor on fragment mapping failure

    In the Linux kernel, the following vulnerability has been resolved: net: spacemit: clear TX descriptor on fragment mapping failure emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for every slot beyond old_head as soon as that slot's memset()'d local copy is committed with "*tx_desc_addr = tx_desc", i.e. before the buffers for that slot have necessarily all been mapped successfully. If emac_tx_map_frag() then fails on a later fragment, the err_free_skb path calls emac_free_tx_buf() to unmap and drop the skb, but leaves the already-written descriptor memory untouched, and tx_ring->head is never advanced past old_head (the "tx_

    • Actualiza a 7.2.9-1
    Publicación Actualización
  8. CVE-2026-98591

    Alta · CVSS 8.4EPSS 0,2%Corrección disponible

    bpf: Fix bounds check for skb-backed dynptrs

    In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bounds check for skb-backed dynptrs The skb_pointer_if_linear() function checks whether a memory region of length len starting at offset off into the skb is in the linear area, and returns a pointer to the region if so. The check currently subtracts between skb_headlen and offset of the check, and since skb_headlen is unsigned the subtraction can underflow. This causes the bounds check to spuriously pass and generate an arbitrary pointer of the form *(skb->data + off). The only user of this helper is currently skb-backed BPF dynptr code. Returning the wrong pointe

    • Actualiza a 7.2.9-1
    Publicación Actualización
  9. CVE-2026-98590

    Alta · CVSS 8.5EPSS 0,22%Corrección disponible

    bpf: Fix bpf_sock context code generation

    In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sock context code generation Currently, the ctx access code reads the rx_queue_mapping field with either a 4-byte or 2-byte load. The rest of the bits in the register are marked known zero by the verifier. However, the emitted ctx access code places in the register on certain the special value (-1) using BPF_MOV_IMM64, which gets sign-extended to turn on all the bits in the register. By shifting this value right, the program ends up with a value at runtime above what the verifier assumes is possible. Fix this by ensuring the read value is as wide as the assume

    • Actualiza a 7.2.9-1
    Publicación Actualización
  10. CVE-2026-98589

    Alta · CVSS 7.1EPSS 0,2%Corrección disponible

    bpf: Reject pkt arguments in mutating subprogs

    In the Linux kernel, the following vulnerability has been resolved: bpf: Reject pkt arguments in mutating subprogs The verifier tracks changes in how PTR_TO_PACKET registers' bounds are modified across subprog boundaries. PTR_TO_PACKET registers are actually passed as PTR_TO_MEM, which is assumed valid for the entire call. This is not the case with packet memory, where a pskb_* call may invalidate its memory region. Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET because we would also need to somehow pass the PTR_TO_PACKET_META or PTR_TO_PACKET_END

    • Actualiza a 7.2.9-1
    Publicación Actualización
  11. CVE-2026-98588

    Alta · CVSS 7.1EPSS 0,21%Corrección disponible

    bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc

    In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc sock_map_alloc() only rejects max_entries == 0 and otherwise allows any u32 value. sock_map_free() then walks the sks[] array with a signed int iterator: int i; for (i = 0; i < stab->map.max_entries; i++) struct sock **psk = &stab->sks[i]; When a SOCKMAP is created with max_entries = 0xffffffff (UINT_MAX), the allocation of 32 GiB can succeed on large-memory hosts. During free the counter reaches 0x80000000, wraps to INT_MIN, is sign-extended by movslq and turned into a ~16 GiB negative offset from stab->s

    • Actualiza a 7.2.9-1
    Publicación Actualización
  12. CVE-2026-98587

    Sin evaluarEPSS 0,19%Corrección disponible

    firewire: cdev: fix back-transition for iso_resource_auto client resource

    In the Linux kernel, the following vulnerability has been resolved: firewire: cdev: fix back-transition for iso_resource_auto client resource The todo member of iso_resource_auto structure represents the state of the client resource and normally transitions in the following order: ISO_RES_AUTO_ALLOC -> ISO_RES_AUTO_REALLOC -> ISO_RES_AUTO_DEALLOC However, concurrent access from the work item and the file descriptor release function can cause the state to transition backwards from ISO_RES_AUTO_DEALLOC to ISO_RES_AUTO_REALLOC. Prevent the back-transition by checking the current state before updating it in the work item.

    • Actualiza a 7.2.9-1
    Publicación Actualización
  13. CVE-2026-98586

    Alta · CVSS 7.3EPSS 0,17%Corrección disponible

    sctp: hold asoc or transport before mod_timer() in timer handlers

    In the Linux kernel, the following vulnerability has been resolved: sctp: hold asoc or transport before mod_timer() in timer handlers Take the association or transport reference before rearming a timer in the timer handlers. The existing code calls mod_timer() before taking the reference needed by the rearmed timer without holding the sock lock. This creates a race with timer cleanup: if the timer is deleted after mod_timer() returns but before the reference is taken, the cleanup path can drop the timer's reference and destroy the transport or association. The timer handler then takes a reference on the already freed object and eventually

    • Actualiza a 7.2.9-1
    Publicación Actualización
  14. CVE-2026-98585

    Media · CVSS 6.7EPSS 0,17%Corrección disponible

    eth: fbnic: Avoid rounding zero ring sizes

    In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Avoid rounding zero ring sizes roundup_pow_of_two() is undefined for zero. ethtool permits a zero ring size to reach the driver, where the minimum-size check should reject it. Leave zero unchanged while rounding nonzero ring sizes. The minimum-size check then rejects zero deterministically without changing the established behavior for other values.

    • Actualiza a 7.2.9-1
    Publicación Actualización
  15. CVE-2026-98584

    Media · CVSS 4.8EPSS 0,2%Corrección disponible

    net/sched: fix potential stack infoleak in em_text_dump()

    In the Linux kernel, the following vulnerability has been resolved: net/sched: fix potential stack infoleak in em_text_dump() em_text_dump() allocates struct tcf_em_text on the stack without zeroing it. strscpy() writes the algorithm name and a NUL terminator into conf.algo[], leaving the remaining bytes uninitialised. nla_put_nohdr() then copies the full struct to the netlink response. KMSAN on Linux 7.2-rc6 reports two kernel-infoleak splats from this path, one triggered via "tc filter show" and one via a raw RTM_GETTFILTER dump: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1c9/0x2620 nla_put_nohdr+0x83/0x130 em_text_dump+

    • Actualiza a 7.2.9-1
    Publicación Actualización
  16. CVE-2026-98583

    Baja · CVSS 1EPSS 0,22%Corrección disponible

    nfc: nfcmrvl: validate helper command length before pull

    In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: validate helper command length before pull The firmware download receive path removes the NCI data header and reads the helper command before validating the remaining packet length. A short frame can therefore reach the data access before the malformed packet is rejected. Validate the complete helper command length before stripping the NCI data header.

    • Actualiza a 7.2.9-1
    Publicación Actualización
  17. CVE-2026-98582

    Media · CVSS 5.1EPSS 0,22%Corrección disponible

    nfc: st21nfca: validate received frame size

    In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate received frame size st21nfca_hci_i2c_repack() trims a received frame at its EOF marker before removing byte stuffing. It then assumes the truncated frame contains the LLC header and two CRC bytes, and it unconditionally reads the byte after an escape marker. A malformed frame can place EOF immediately after the start marker or can end its data portion with an escape marker. The former leaves too few bytes for check_crc(), while the latter makes the unstuffing loop read past the current skb length. Require the minimum framing bytes both before and

    • Actualiza a 7.2.9-1
    Publicación Actualización
  18. CVE-2026-98581

    Media · CVSS 6.9EPSS 0,22%Corrección disponible

    nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm()

    In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm() nfc_llcp_recv_dm() handles DM(NOBOUND)/DM(REJ) for a socket that is still linked on local->connecting_sockets: it looks the socket up with nfc_llcp_connecting_sock_get(), sets sk->sk_state = LLCP_CLOSED and returns, without taking the socket lock and without unlinking the socket from the connecting_sockets list. llcp_sock_release() selects the list to unlink from by sk_state: a socket in LLCP_CONNECTING is unlinked from connecting_sockets, otherwise from the sockets list. Because recv_dm left the socke

    • Actualiza a 7.2.9-1
    Publicación Actualización
  19. CVE-2026-98580

    Alta · CVSS 7.1EPSS 0,22%Corrección disponible

    nfc: llcp: Fix race condition in accept_queue lifecycle

    In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix race condition in accept_queue lifecycle In nfc_llcp_socket_release(), sockets and listener accept queues are walked under the local sockets rwlock and bh_lock_sock(). However, bh_lock_sock() does not synchronise against process-context lock_sock() held by nfc_llcp_accept_dequeue() during accept(). Because socket_release() does not check sock_owned_by_user(), both paths can concurrently unlink and release the same child socket, resulting in use-after-free or a NULL pointer dereference of child->parent in nfc_llcp_accept_unlink(). Fix this synchronisation r

    • Actualiza a 7.2.9-1
    Publicación Actualización
  20. CVE-2026-98579

    Sin evaluarEPSS 0,22%Corrección disponible

    nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure

    In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was already queued. Route them through a new free_list label, mirroring the SDRES path in the same file which already does this. Harmless on the success path too -- send_snl_sdreq() drains the list as it moves nodes, so it's already empty by the time free_list runs.

    • Actualiza a 7.2.9-1
    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →