drm/imagination: Size page table preallocation by device address
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Size page table preallocation by device address
Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for
map() interface") passed the device address to
pvr_mmu_op_context_create(), but the preallocation is still sized from
device_addr + sgt_offset with an exclusive end. The offset into the
object's pages has no place in a device-virtual range, and the exclusive
end allocates one table too many when the range ends on a table
boundary.
Count the tables from device_addr and the inclusive end of the range.
The new calculation does not take pag
drm/panthor: validate userspace queue count against initialized firmware slot count
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: validate userspace queue count against initialized firmware slot count
In panthor_drv.c:panthor_ioctl_group_create(),
the queue count is validated against the hardcoded maximum:
if (!args->queues.count || args->queues.count > MAX_CS_PER_CSG)
return -EINVAL;
However, if the firmware reports fewer slots than MAX_CS_PER_CSG,
panthor_fw_init_ifaces() will only initialize that smaller number of
stream interfaces.
If unprivileged userspace requests more queues than the firmware reported
(but no more than MAX_CS_PER_CSG), cs_slot_prog_locked() fetches an
uniniti
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate pitch coming from userspace
Validate the pitch, alongside the box dimensions before trying
to copy data from the underlying surface. Fixes possible
out of bounds reads with cursor snooping.
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/i2c: cancel the client work on remove
xe_i2c_notifier() stores the DesignWare adapter in i2c->adapter and
schedules i2c->work when the adapter is registered under the xe I2C
platform device, and xe_i2c_client_work() then instantiates the AMC
client device on that adapter.
xe_i2c_remove() tears down the AMC, unregisters the client devices,
the bus notifier and the adapter platform device, but it never drains
i2c->work. A work item that is still queued or running when the
adapter is unregistered dereferences i2c->adapter in
i2c_new_client_device() after platform_devic
drm/xe: Fix shrinker accounting double-subtraction on nested external pins
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix shrinker accounting double-subtraction on nested external pins
xe_bo_pin_external() and xe_bo_unpin_external() support nested pins,
since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count
refcount rather than a boolean. However, the shrinker accounting calls
xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked
unconditionally on every pin_external()/unpin_external() call, instead
of only on the transition into and out of the pinned state.
An external BO (dma-buf) can be pinned more than once while already
pinned, for example when i
drm/xe: Fix stale pinned_link entry when fb-pin performs the final unpin
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix stale pinned_link entry when fb-pin performs the final unpin
xe_bo_pin_external() and xe_bo_unpin_external() maintain the bo's
pinned_link list membership in xe->pinned.late.external, based on
whether the current call is the outermost pin or the final unpin.
However, the same external bo's pin_count can also be raised and
lowered directly by __xe_pin_fb_vma()/__xe_unpin_fb_vma(), which pin
the bo as a display scanout buffer without going through
xe_bo_pin_external()/xe_bo_unpin_external() at all, and have no
notion of, or ownership over, pinned_link.
If a bo is
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: th1520-dw-hdmi: Fix remove() callback
This driver stores struct th1520_hdmi * in platform drvdata, but
th1520_dw_hdmi_remove() was reading it back as struct dw_hdmi *
and passing it to dw_hdmi_remove(), so teardown runs on the wrong
pointer.
Retrieve struct th1520_hdmi * from platform drvdata and pass
hdmi->dw_hdmi to dw_hdmi_remove().
drm/amdgpu/userq: only accept doorbell BOs as queue doorbell
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: only accept doorbell BOs as queue doorbell
amdgpu_userq_get_doorbell_index() pins any BO passed as doorbell_handle
into the doorbell domain. For a regular BO, TTM moves it with
ttm_bo_move_null() and its contents are lost. Since an importer on the
same device gets the exporter's GEM object, a client can do this to a
buffer another client shared with it.
Reject BOs that were not created in the doorbell domain.
v2: drop the error message, use a local abo variable (Christian)
(cherry picked from commit f7497bbc19db4821c62b9d97b31c9086feb2d917)
In the Linux kernel, the following vulnerability has been resolved:
fs: don't silently unmount busy mounts
The propagate_mount_busy() helper exists to decide whether a synchronous
can suceed. It does that by looking at the copies of the victims in the
mounts its parent propagates to. One of those functions from propagation
hell.
It skips a copy that has child mounts except for the case of a single
child mount covering the copy's root. That algorithm used to be exact.
It isn't anymore.
Originally only childless copies were unmounted during propagation.
And 1064f874abc0 ("mnt: Tuck mounts under others instead of creating
shadow/side mounts.
namespace: reset the old parent's ->overmount in mnt_change_mountpoint()
In the Linux kernel, the following vulnerability has been resolved:
namespace: reset the old parent's ->overmount in mnt_change_mountpoint()
__umount_mnt() resets ->overmount of the parent when it unmounts the
mount that overmounts it. mnt_change_mountpoint() doesn't. It moves the
mount to its new parent and leaves the old one pointing at it.
For a mount that is moved beneath in attach_recursive_mnt() that doesn't
matter. The new mount has already reset ->overmount of the old parent by
the time the old top mount is moved onto it.
It matters for reparent() though. propagate_umount() moves a surviving
overmount onto the first ancestor that
statmount: read the parent of an unmounted mount under mount_lock
In the Linux kernel, the following vulnerability has been resolved:
statmount: read the parent of an unmounted mount under mount_lock
statmount_mnt_basic() reads the ids of the parent through m->mnt_parent
with namespace_sem held for reading. That's fine for a mount that is
in a namespace. Everything above it is pinned by that namespace.
STATMOUNT_BY_FD also accepts a file descriptor on a mount that has
been unmounted on purpose and that only the file descriptor keeps alive.
If that mount stayed attached to its parent when it was unmounted the
parent is unmounted as well and nothing pins it for the child.
The final mntput() unmounts the c
namespace: don't inherit MNT_UMOUNT in clone_mnt()
In the Linux kernel, the following vulnerability has been resolved:
namespace: don't inherit MNT_UMOUNT in clone_mnt()
MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has
taken out of its namespace. It's never cleared. __detach_mounts()
unhooks a mount that carries it instead of unmounting it.
disconnect_mount() lets an unmounted child stay attached only if its
parent carries it. propagate_umount() takes it as the sign that a mount
is going to be unmounted when it decides what else can be unmounted,
where a chain of locked mounts ends and where a for reparenting an
overmount.
clone_mnt() copies the flags of the source
In the Linux kernel, the following vulnerability has been resolved:
namespace: don't copy an unmounted mount tree
may_copy_tree() accepts a mount whose root is an nsfs or pidfs file
before it checks whether that mount is mounted. This exception exists
for nsfs and pidfs mounts. They are part of no mount namespace so
neither check_mnt() nor is_mounted() would let them through and
bind-mounting a nsfsfd or a pidfd wouldn't work.
Problem is that exception also admits a bind mount of such a file when
it was lazily unmounted and is only kept alive by a file descriptor:
mount --bind /proc/self/ns/net /tmp/x
exec 3< /tmp/x
umount -l /tmp/x
namespace: queue a mount only once for mount notifications
In the Linux kernel, the following vulnerability has been resolved:
namespace: queue a mount only once for mount notifications
mnt_notify_add() puts a mount on notify_list. It doesn't check whether
the mount is on the list already. That's fine as long as every mount is
queued at most once per namespace_sem hold. It isn't.
propagate_umount() moves a surviving overmount off a stack of mounts
that are going away and queues it as moved. shrink_submounts() and
mark_mounts_for_expiry() call umount_tree() for several mounts under a
single namespace_sem hold. So the second umount_tree() can take down
exactly the mount the first one reparented, rep
namespace: check a submount for references right before unmounting it
In the Linux kernel, the following vulnerability has been resolved:
namespace: check a submount for references right before unmounting it
shrink_submounts() and mark_mounts_for_expiry() first collect all the
mounts they are allowed to unmount and then unmount them.
Whether a mount is busy is decided by propagate_mount_busy() on the
tree. But unmounting the first mount changes the tree that the second
one propagates into. propagate_umount()
moves a surviving overmount off a copy it unmounts and mounts it where
the copy was mounted. If that's where the propagated copy of the second
victim is looked up the overmount becomes a candidate of the
namespace: check a recursive bind mount for mount namespace loops
In the Linux kernel, the following vulnerability has been resolved:
namespace: check a recursive bind mount for mount namespace loops
do_loopback() refuses to bind mount the file of a mount namespace that
is as old as the caller's or older because a mount namespace that holds
a mount of its own file, or of an ancestor's, would cause a cycle. But
it only checks the dentry the bind mount starts from. With MS_REC
everything below it is copied and do_loopback() passes
CL_COPY_MNT_NS_FILE so mount namespace files below the source are
copied.
That's fine for a source in the caller's own mount namespace. Every
mount namespace file in there passed
namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE
In the Linux kernel, the following vulnerability has been resolved:
namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE
open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a
copy of the tree at the given path. The caller needs to be privileged
over its current user namespace because the new mount namespace will be
owned by it. It doesn't need to be privileged over the mount namespace
the tree is copied from. An unprivileged user just needs to create a
user namespace first.
The copy follows the rules of a detached bind mount. Without
AT_RECURSIVE only the mount itself is cloned and its children are left
out. With AT_
namespace: look at the topmost mount for a mount namespace file
In the Linux kernel, the following vulnerability has been resolved:
namespace: look at the topmost mount for a mount namespace file
attach_recursive_mnt() preallocates a mountpoint for the root of the
topmost mount of the source so that a mount that already sits at the
destination can be put on top of the source or on top of one of its
propagated copies.
The copies are made without CL_COPY_MNT_NS_FILE so their chain of
overmounts is shorter than the source's. It ends below the first bind
mount of a mount namespace file. So while the loop walks up the chain of
the source it remembers the mountpoint of that mount in "shorter" and
the existin
namespace: remove the fsnotify marks of a mount namespace in process context
In the Linux kernel, the following vulnerability has been resolved:
namespace: remove the fsnotify marks of a mount namespace in process context
mnt_ns_release() drops the last passive reference of a mount namespace
and removes its fanotify marks via fsnotify_mntns_delete(). That takes
the mutex of every group with a mark on the namespace and the spinlock
of the connector. Fine from process context. But mnt_ns_tree_remove()
hands the reference the namespace was allocated with to call_rcu() and
so the marks are removed from the RCU softirq:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:623
in_atomic(): 1,
namespace: check the mounts before reading their parents in pivot_root()
In the Linux kernel, the following vulnerability has been resolved:
namespace: check the mounts before reading their parents in pivot_root()
path_pivot_root() reads the parents of new_root and of the caller's root
and checks whether they are shared before it checks that either mount is
in the caller's mount namespace. Only namespace_sem is held. That's fine
for a mount that is in the caller's mount namespace.
But new_root can be a file descriptor to a mount that has been unmounted
and that only the file descriptor keeps alive. If that mount stayed
attached to its parent when it was unmounted nothing pins the parent for
it. The final mntput