p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-gcp-5.4 · Página 54

Vulnerabilidades publicadas para linux-gcp-5.4 en los últimos 30 días: 0. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 1756

  1. CVE-2021-47343

    Alta · CVSS 7.8EPSS 0,27%Corrección disponible

    dm btree remove: assign new_root only when removal succeeds

    In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address

    • Actualiza a 5.4.0-1052.56~18.04.1
    Publicación Actualización
  2. CVE-2021-47341

    Alta · CVSS 7.8EPSS 0,26%Corrección disponible

    KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio

    In the Linux kernel, the following vulnerability has been resolved: KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio BUG: KASAN: use-after-free in kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 Read of size 8 at addr ffff0000c03a2500 by task syz-executor083/4269 CPU: 5 PID: 4269 Comm: syz-executor083 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x164 lib/

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  3. CVE-2021-47340

    Media · CVSS 5.5EPSS 0,26%Corrección disponible

    jfs: fix GPF in diFree

    In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

    • Actualiza a 5.4.0-1052.56~18.04.1
    Publicación Actualización
  4. CVE-2021-47338

    Alta · CVSS 7.8EPSS 0,27%Corrección disponible

    fbmem: Do not delete the mode that is still in use

    In the Linux kernel, the following vulnerability has been resolved: fbmem: Do not delete the mode that is still in use The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name:

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  5. CVE-2021-47337

    Media · CVSS 5.5EPSS 0,24%Corrección disponible

    scsi: core: Fix bad pointer dereference when ehandler kthread is invalid

    In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix bad pointer dereference when ehandler kthread is invalid Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which wi

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  6. CVE-2021-47336

    Alta · CVSS 7.8EPSS 0,25%Corrección disponible

    smackfs: restrict bytes count in smk_set_cipso()

    In the Linux kernel, the following vulnerability has been resolved: smackfs: restrict bytes count in smk_set_cipso() Oops, I failed to update subject line. From 07571157c91b98ce1a4aa70967531e64b78e8346 Mon Sep 17 00:00:00 2001 Date: Mon, 12 Apr 2021 22:25:06 +0900 Subject: [PATCH] smackfs: restrict bytes count in smk_set_cipso() Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write functions") missed that count > SMK_CIPSOMAX check applies to only format == SMK_FIXED24_FMT case.

    • Actualiza a 5.4.0-1052.56~18.04.1
    Publicación Actualización
  7. CVE-2021-47334

    Alta · CVSS 7.8EPSS 0,28%Corrección disponible

    misc/libmasm/module: Fix two use after free in ibmasm_init_one

    In the Linux kernel, the following vulnerability has been resolved: misc/libmasm/module: Fix two use after free in ibmasm_init_one In ibmasm_init_one, it calls ibmasm_init_remote_input_dev(). Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are allocated by input_allocate_device(), and assigned to sp->remote.mouse_dev and sp->remote.keybd_dev respectively. In the err_free_devices error branch of ibmasm_init_one, mouse_dev and keybd_dev are freed by input_free_device(), and return error. Then the execution runs into error_send_message error branch of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called to unregister

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  8. CVE-2021-47333

    Media · CVSS 5.5EPSS 0,24%Corrección disponible

    misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge

    In the Linux kernel, the following vulnerability has been resolved: misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge There is an issue with the ASPM(optional) capability checking function. A device might be attached to root complex directly, in this case, bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL. Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's ASPM capability and populate parent_cap_off, which will be used later by alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do here is to avoid checking the capability if we are on the root complex. This will make pdev_cap

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  9. CVE-2021-47332

    Media · CVSS 5.7EPSS 0,24%Corrección disponible

    ALSA: usx2y: Don't call free_pages_exact() with NULL address

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Don't call free_pages_exact() with NULL address Unlike some other functions, we can't pass NULL pointer to free_pages_exact(). Add a proper NULL check for avoiding possible Oops.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  10. CVE-2021-47330

    Media · CVSS 5.5EPSS 0,24%Corrección disponible

    tty: serial: 8250: serial_cs: Fix a memory leak in error handling path

    In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: serial_cs: Fix a memory leak in error handling path In the probe function, if the final 'serial_config()' fails, 'info' is leaking. Add a resource handling path to free this memory.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  11. CVE-2021-47329

    Media · CVSS 6.2EPSS 0,26%Corrección disponible

    scsi: megaraid_sas: Fix resource leak in case of probe failure

    In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix resource leak in case of probe failure The driver doesn't clean up all the allocated resources properly when scsi_add_host(), megasas_start_aen() function fails during the PCI device probe. Clean up all those resources.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  12. CVE-2021-47328

    Crítica · CVSS 9.8EPSS 0,77%Corrección disponible

    scsi: iscsi: Fix conn use after free during resets

    In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: Fix conn use after free during resets If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and it's devices, and know after that point there is no device or scsi-ml callout trying to access the session.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  13. CVE-2021-47327

    Alta · CVSS 7.1EPSS 0,26%Corrección disponible

    iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails

    In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the refcount of the "smmu" even though the return value is less than 0. The reference counting issue happens in some error handling paths of arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get() fails, the caller functions forget to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by calling pm_runtime_resume_and_get() instead of pm_runtime_get_sync() in arm_smm

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  14. CVE-2021-47325

    Media · CVSS 5.5EPSS 0,25%Corrección disponible

    iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation

    In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation The reference counting issue happens in several exception handling paths of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the function forgets to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by jumping to "out" label when those error scenarios occur.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  15. CVE-2021-47324

    Alta · CVSS 8.8EPSS 1,16%Corrección disponible

    watchdog: Fix possible use-after-free in wdt_startup()

    In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free in wdt_startup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  16. CVE-2021-47323

    Alta · CVSS 8.8EPSS 1,16%Corrección disponible

    watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()

    In the Linux kernel, the following vulnerability has been resolved: watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  17. CVE-2021-47321

    Alta · CVSS 7.8EPSS 0,25%Corrección disponible

    watchdog: Fix possible use-after-free by calling del_timer_sync()

    In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  18. CVE-2021-47320

    Media · CVSS 5.5EPSS 0,26%Corrección disponible

    nfs: fix acl memory leak of posix_acl_create()

    In the Linux kernel, the following vulnerability has been resolved: nfs: fix acl memory leak of posix_acl_create() When looking into another nfs xfstests report, I found acl and default_acl in nfs3_proc_create() and nfs3_proc_mknod() error paths are possibly leaked. Fix them in advance.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  19. CVE-2021-47319

    Media · CVSS 5.5EPSS 0,26%Corrección disponible

    virtio-blk: Fix memory leak among suspend/resume procedure

    In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Fix memory leak among suspend/resume procedure The vblk->vqs should be freed before we call init_vqs() in virtblk_restore().

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización
  20. CVE-2021-47315

    Media · CVSS 5.5EPSS 0,25%Corrección disponible

    memory: fsl_ifc: fix leak of IO mapping on probe failure

    In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of IO mapping on probe failure On probe error the driver should unmap the IO memory. Smatch reports: drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298.

    • Actualiza a 5.4.0-1053.57~18.04.1
    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →