scsi: core: Fix error handling of scsi_host_alloc()
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix error handling of scsi_host_alloc()
After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device(). Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().
Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.
In the Linux kernel, the following vulnerability has been resolved:
net: ieee802154: fix null deref in parse dev addr
Fix a logic error that could result in a null deref if the user sets
the mode incorrectly for the given addr type.
mm/memory-failure: make sure wait for page writeback in memory_failure
In the Linux kernel, the following vulnerability has been resolved:
mm/memory-failure: make sure wait for page writeback in memory_failure
Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in
clear_inode:
kernel BUG at fs/inode.c:519!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in:
Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7)
CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : clear_inode+0x280/0x2a8
lr : clear_inode+0x280/0x2a8
Call trace:
clear_inode+0x280/0x2a8
ext4_clear_ino
gfs2: Fix use-after-free in gfs2_glock_shrink_scan
In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in gfs2_glock_shrink_scan
The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to
remove the glock from the lru list in __gfs2_glock_put().
On the shrink scan path, the same flag is cleared under lru_lock but because
of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the
put side can be made without deleting the glock from the lru list.
Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to
ensure correct behavior on both sides - clear GLF_LRU after list_del under
lru_lock.
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: Avoid WARN_ON timing related checks
The soft/batadv interface for a queued OGM can be changed during the time
the OGM was queued for transmission and when the OGM is actually
transmitted by the worker.
But WARN_ON must be used to denote kernel bugs and not to print simple
warnings. A warning can simply be printed using pr_warn.
In the Linux kernel, the following vulnerability has been resolved:
net: rds: fix memory leak in rds_recvmsg
Syzbot reported memory leak in rds. The problem
was in unputted refcount in case of error.
int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
int msg_flags)
{
...
if (!rds_next_incoming(rs, &inc)) {
...
}
After this "if" inc refcount incremented and
if (rds_cmsg_recv(inc, msg, rs)) {
ret = -EFAULT;
goto out;
}
...
out:
return ret;
}
in case of rds_cmsg_recv() fail the refcount won't be
decremented. And it's easy to see from ftrace log, that
rds_inc_addref() don't have rds_inc_put() pair in
rds_rec
In the Linux kernel, the following vulnerability has been resolved:
udp: fix race between close() and udp_abort()
Kaustubh reported and diagnosed a panic in udp_lib_lookup().
The root cause is udp_abort() racing with close(). Both
racing functions acquire the socket lock, but udp{v6}_destroy_sock()
release it before performing destructive actions.
We can't easily extend the socket lock scope to avoid the race,
instead use the SOCK_DEAD flag to prevent udp_abort from doing
any action when the critical race happens.
Diagnosed-and-tested-by: Kaustubh Pandey <[email protected]>
netfilter: synproxy: Fix out of bounds when parsing TCP options
In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: Fix out of bounds when parsing TCP options
The TCP option parser in synproxy (synproxy_parse_options) could read
one byte out of bounds. When the length is 1, the execution flow gets
into the loop, reads one byte of the opcode, and if the opcode is
neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds
the length of 1.
This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").
v2 changes:
Added an early return when length < 0 to avoid calling
skb_header_pointer with negative l
In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix OOB Read in qrtr_endpoint_post
Syzbot reported slab-out-of-bounds Read in
qrtr_endpoint_post. The problem was in wrong
_size_ type:
if (len != ALIGN(size, 4) + hdrlen)
goto err;
If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of
ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293
in header this check won't fail and
skb_put_data(skb, data + hdrlen, size);
will read out of bound from data, which is hdrlen allocated block.
net: usb: fix possible use-after-free in smsc75xx_bind
In the Linux kernel, the following vulnerability has been resolved:
net: usb: fix possible use-after-free in smsc75xx_bind
The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
fails to clean up the work scheduled in smsc75xx_reset->
smsc75xx_set_multicast, which leads to use-after-free if the work is
scheduled to start after the deallocation. In addition, this patch
also removes a dangling pointer - dev->data[0].
This patch calls cancel_work_sync to cancel the scheduled work and set
the dangling pointer to NULL.
In the Linux kernel, the following vulnerability has been resolved:
net: hamradio: fix memory leak in mkiss_close
My local syzbot instance hit memory leak in
mkiss_open()[1]. The problem was in missing
free_netdev() in mkiss_close().
In mkiss_open() netdevice is allocated and then
registered, but in mkiss_close() netdevice was
only unregistered, but not freed.
Fail log:
BUG: memory leak
unreferenced object 0xffff8880281ba000 (size 4096):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0.............
00 27 fa 2a 80 88 ff ff 00 00 0
In the Linux kernel, the following vulnerability has been resolved:
net: cdc_eem: fix tx fixup skb leak
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(),
if skb_copy_expand() failed, it return NULL,
usbnet_start_xmit() will have no chance to free original skb.
fix it by free orginal skb in eem_tx_fixup() first,
then check skb clone status, if failed, return NULL to usbnet.
net: ethernet: fix potential use-after-free in ec_bhf_remove
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: fix potential use-after-free in ec_bhf_remove
static void ec_bhf_remove(struct pci_dev *dev)
{
...
struct ec_bhf_priv *priv = netdev_priv(net_dev);
unregister_netdev(net_dev);
free_netdev(net_dev);
pci_iounmap(dev, priv->dma_io);
pci_iounmap(dev, priv->io);
...
}
priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.
In the Linux kernel, the following vulnerability has been resolved:
can: mcba_usb: fix memory leak in mcba_usb
Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS
Analyzer Tool. The problem was in unfreed usb_coherent.
In mcba_usb_start() 20 coherent buffers are allocated and there is
nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see mcba_usb_start) and this flag cannot be used with
coherent buffers.
Fail log:
| [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected
| [ 1367.059384
PCI: aardvark: Fix kernel panic during PIO transfer
In the Linux kernel, the following vulnerability has been resolved:
PCI: aardvark: Fix kernel panic during PIO transfer
Trying to start a new PIO transfer by writing value 0 in PIO_START register
when previous transfer has not yet completed (which is indicated by value 1
in PIO_START) causes an External Abort on CPU, which results in kernel
panic:
SError Interrupt on CPU0, code 0xbf000002 -- SError
Kernel panic - not syncing: Asynchronous SError Interrupt
To prevent kernel panic, it is required to reject a new PIO transfer when
previous one has not finished yet.
If previous PIO transfer is not finished yet, the kernel may issue a
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix vlan tunnel dst null pointer dereference
This patch fixes a tunnel_dst null pointer dereference due to lockless
access in the tunnel egress path. When deleting a vlan tunnel the
tunnel_dst pointer is set to NULL without waiting a grace period (i.e.
while it's still usable) and packets egressing are dereferencing it
without checking. Use READ/WRITE_ONCE to annotate the lockless use of
tunnel_id, use RCU for accessing tunnel_dst and make sure it is read
only once and checked in the egress path. The dst is already properly RCU
protected so we don't need to do
net: bridge: fix vlan tunnel dst refcnt when egressing
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix vlan tunnel dst refcnt when egressing
The egress tunnel code uses dst_clone() and directly sets the result
which is wrong because the entry might have 0 refcnt or be already deleted,
causing number of problems. It also triggers the WARN_ON() in dst_hold()[1]
when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and
checking if a reference was actually taken before setting the dst.
[1] dmesg WARN_ON log and following refcnt errors
WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
Modules linked i
drm/radeon: add a force flush to delay work when radeon
In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: add a force flush to delay work when radeon
Although radeon card fence and wait for gpu to finish processing current batch rings,
there is still a corner case that radeon lockup work queue may not be fully flushed,
and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to
put device in D3hot state.
Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
> Configuration and Message requests are the only TLPs accepted by a Function in
> the D3hot state. All other received Requests must be handled as Unsupported Requests,
> and all received Complet