In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix NULL ptr dereference on VSI filter sync
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
usb: musb: tusb6010: check return value after calling platform_get_resource()
In the Linux kernel, the following vulnerability has been resolved:
usb: musb: tusb6010: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix sysfs leak in alloc_iommu()
iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent
errors.
In the Linux kernel, the following vulnerability has been resolved:
net: usb: fix memory leak in smsc75xx_bind
Syzbot reported memory leak in smsc75xx_bind().
The problem was is non-freed memory in case of
errors after memory allocation.
backtrace:
[<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline]
[<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline]
[<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460
[<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728
USB: usbfs: Don't WARN about excessively large memory allocations
In the Linux kernel, the following vulnerability has been resolved:
USB: usbfs: Don't WARN about excessively large memory allocations
Syzbot found that the kernel generates a WARNing if the user tries to
submit a bulk transfer through usbfs with a buffer that is way too
large. This isn't a bug in the kernel; it's merely an invalid request
from the user and the usbfs code does handle it correctly.
In theory the same thing can happen with async transfers, or with the
packet descriptor table for isochronous transfers.
To prevent the MM subsystem from complaining about these bad
allocation requests, add the __GFP_NOWARN flag to the kmalloc c
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
In the Linux kernel, the following vulnerability has been resolved:
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.
Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver re
NFS: fix an incorrect limit in filelayout_decode_layout()
In the Linux kernel, the following vulnerability has been resolved:
NFS: fix an incorrect limit in filelayout_decode_layout()
The "sizeof(struct nfs_fh)" is two bytes too large and could lead to
memory corruption. It should be NFS_MAXFHSIZE because that's the size
of the ->data[] buffer.
I reversed the size of the arguments to put the variable on the left.
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
In the Linux kernel, the following vulnerability has been resolved:
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
The value of mirror->pg_bytes_written should only be updated after a
successful attempt to flush out the requests on the list.
drm/meson: fix shutdown crash when component not probed
In the Linux kernel, the following vulnerability has been resolved:
drm/meson: fix shutdown crash when component not probed
When main component is not probed, by example when the dw-hdmi module is
not loaded yet or in probe defer, the following crash appears on shutdown:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
...
pc : meson_drv_shutdown+0x24/0x50
lr : platform_drv_shutdown+0x20/0x30
...
Call trace:
meson_drv_shutdown+0x24/0x50
platform_drv_shutdown+0x20/0x30
device_shutdown+0x158/0x360
kernel_restart_prepare+0x38/0x48
kernel_restart+0x18/0x68
__do_sys_reboot+0x224/0x250
__arm64_sys_reboot+0x24/
tipc: skb_linearize the head skb when reassembling msgs
In the Linux kernel, the following vulnerability has been resolved:
tipc: skb_linearize the head skb when reassembling msgs
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by ps
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the
error handling path of the probe function, as already done in the remove
function
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: fix a crash if ->get_sset_count() fails
If ds->ops->get_sset_count() fails then it "count" is a negative error
code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative
error code is type promoted to a very high value and the loop will
corrupt memory until the system crashes.
Fix this by checking for error codes and changing the type of "i" to
just int.
i2c: i801: Don't generate an interrupt on bus reset
In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Don't generate an interrupt on bus reset
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b3
In the Linux kernel, the following vulnerability has been resolved:
net: fujitsu: fix potential null-ptr-deref
In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer
deref. To fix this, check the return value of ioremap and return -1
to the caller in case of failure.
In the Linux kernel, the following vulnerability has been resolved:
mld: fix panic in mld_newpack()
mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().
Test commands:
ip netns del A
ip netns del B
ip netns add A
ip netns add B
ip link add veth0 type veth peer name veth1
ip link set veth0 netns A
ip link set veth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set veth0 up
ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set lo up
ip n
In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not BUG_ON in link_to_fixup_dir
While doing error injection testing I got the following panic
kernel BUG at fs/btrfs/tree-log.c:1862!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:link_to_fixup_dir+0xd5/0xe0
RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216
RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0
RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000
RBP: ffff8f5953af9450 R08:
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix a use-after-free
looks like we forget to set ttm->sg to NULL.
Hit panic below
[ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 1235.989074] Call Trace:
[ 1235.991751] sg_free_table+0x17/0x20
[ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu]
[ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu]
[ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm]
[ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm]
[ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm]
[
In the Linux kernel, the following vulnerability has been resolved:
net: caif: fix memory leak in caif_device_notify
In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error