p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-oracle · Página 18

Vulnerabilidades publicadas para linux-oracle en los últimos 30 días: 0. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 1536

  1. CVE-2023-52932

    Media · CVSS 5.5EPSS 0,2%Corrección disponible

    mm/swapfile: add cond_resched() in get_swap_pages()

    In the Linux kernel, the following vulnerability has been resolved: mm/swapfile: add cond_resched() in get_swap_pages() The softlockup still occurs in get_swap_pages() under memory pressure. 64 CPU cores, 64GB memory, and 28 zram devices, the disksize of each zram device is 50MB with same priority as si. Use the stress-ng tool to increase memory pressure, causing the system to oom frequently. The plist_for_each_entry_safe() loops in get_swap_pages() could reach tens of thousands of times to find available space (extreme case: cond_resched() is not called in scan_swap_map_slots()). Let's add cond_resched() into get_swap_pages() when fail

    • Actualiza a 4.15.0-1119.130
    Publicación Actualización
  2. CVE-2022-49731

    Media · CVSS 5.5EPSS 0,28%Corrección disponible

    ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()

    In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  3. CVE-2022-49729

    Media · CVSS 5.5EPSS 0,27%Corrección disponible

    nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred

    In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred Similar to the handling of play_deferred in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought a patch might be needed here as well. Currently usb_submit_urb is called directly to submit deferred tx urbs after unanchor them. So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb and cause memory leak. Put those urbs in tx_anchor to avoid the leak, and also fix the error handling.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  4. CVE-2022-49727

    Media · CVSS 5.5EPSS 0,28%Corrección disponible

    ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg

    In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we can follow what udpv6 does and subtract the transhdrlen from the max.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  5. CVE-2022-49725

    Alta · CVSS 7.8EPSS 0,3%Corrección disponible

    i40e: Fix call trace in setup_tx_descriptors

    In the Linux kernel, the following vulnerability has been resolved: i40e: Fix call trace in setup_tx_descriptors After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add neti

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  6. CVE-2022-49724

    Alta · CVSS 7.8EPSS 0,28%Corrección disponible

    tty: goldfish: Fix free_irq() on remove

    In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Fix free_irq() on remove Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ...

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  7. CVE-2022-49719

    Media · CVSS 5.5EPSS 0,27%Corrección disponible

    irqchip/gic/realview: Fix refcount leak in realview_gic_of_init

    In the Linux kernel, the following vulnerability has been resolved: irqchip/gic/realview: Fix refcount leak in realview_gic_of_init of_find_matching_node_and_match() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  8. CVE-2022-49713

    Media · CVSS 5.5EPSS 0,29%Corrección disponible

    usb: dwc2: Fix memory leak in dwc2_hcd_init

    In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix memory leak in dwc2_hcd_init usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  9. CVE-2022-49712

    Media · CVSS 5.5EPSS 0,26%Corrección disponible

    usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  10. CVE-2022-49708

    Alta · CVSS 7.1EPSS 0,28%Corrección disponible

    ext4: fix bug_on ext4_mb_use_inode_pa

    In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on ext4_mb_use_inode_pa Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/mballoc.c:3211! [...] RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f [...] Call Trace: ext4_mb_new_blocks+0x9df/0x5d30 ext4_ext_map_blocks+0x1803/0x4d80 ext4_map_blocks+0x3a4/0x1a10 ext4_writepages+0x126d/0x2c30 do_writepages+0x7f/0x1b0 __filemap_fdatawrite_range+0x285/0x3b0 file_write_and_wait_range+0xb1/0x140 ext4_sync_file+0x1aa/0xca0 vfs_fsync_range+0xfb/0x260 do_fsync+0x48/0xa0 [...] =============

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  11. CVE-2022-49707

    Media · CVSS 5.5EPSS 0,28%Corrección disponible

    ext4: add reserved GDT blocks check

    In the Linux kernel, the following vulnerability has been resolved: ext4: add reserved GDT blocks check We capture a NULL pointer issue when resizing a corrupt ext4 image which is freshly clear resize_inode feature (not run e2fsck). It could be simply reproduced by following steps. The problem is because of the resize_inode feature was cleared, and it will convert the filesystem to meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was not reduced to zero, so could we mistakenly call reserve_backup_gdb() and passing an uninitialized resize_inode to it when adding new group descriptors. mkfs.ext4 /dev/sda 3G tune2fs -O ^r

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  12. CVE-2022-49700

    Alta · CVSS 7.8EPSS 0,29%Corrección disponible

    mm/slub: add missing TID updates on slab deactivation

    In the Linux kernel, the following vulnerability has been resolved: mm/slub: add missing TID updates on slab deactivation The fastpath in slab_alloc_node() assumes that c->slab is stable as long as the TID stays the same. However, two places in __slab_alloc() currently don't update the TID when deactivating the CPU slab. If multiple operations race the right way, this could lead to an object getting lost; or, in an even more unlikely situation, it could even lead to an object being freed onto the wrong slab's freelist, messing up the `inuse` counter and eventually causing a page to be freed to the page allocator while it still contains sla

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  13. CVE-2022-49688

    Media · CVSS 5.7EPSS 0,3%Corrección disponible

    afs: Fix dynamic root getattr

    In the Linux kernel, the following vulnerability has been resolved: afs: Fix dynamic root getattr The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 00

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  14. CVE-2022-49685

    Alta · CVSS 7.8EPSS 0,28%Corrección disponible

    iio: trigger: sysfs: fix use-after-free on remove

    In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix use-after-free on remove Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  15. CVE-2022-49682

    Media · CVSS 5.5EPSS 0,26%Corrección disponible

    xtensa: Fix refcount leak bug in time.c

    In the Linux kernel, the following vulnerability has been resolved: xtensa: Fix refcount leak bug in time.c In calibrate_ccount(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  16. CVE-2022-49681

    Media · CVSS 5.5EPSS 0,26%Corrección disponible

    xtensa: xtfpga: Fix refcount leak bug in setup

    In the Linux kernel, the following vulnerability has been resolved: xtensa: xtfpga: Fix refcount leak bug in setup In machine_setup(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  17. CVE-2022-49680

    Media · CVSS 5.5EPSS 0,26%Corrección disponible

    ARM: exynos: Fix refcount leak in exynos_map_pmu

    In the Linux kernel, the following vulnerability has been resolved: ARM: exynos: Fix refcount leak in exynos_map_pmu of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización
  18. CVE-2022-49679

    Media · CVSS 5.5EPSS 0,27%Corrección disponible

    ARM: Fix refcount leak in axxia_boot_secondary

    In the Linux kernel, the following vulnerability has been resolved: ARM: Fix refcount leak in axxia_boot_secondary of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

    • Actualiza a 4.15.0-1107.118
    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →