net: inet: do not leave a dangling sk pointer in inet_create()
In the Linux kernel, the following vulnerability has been resolved:
net: inet: do not leave a dangling sk pointer in inet_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.
Clear the sk pointer in the sock object on error.
net: inet6: do not leave a dangling sk pointer in inet6_create()
In the Linux kernel, the following vulnerability has been resolved:
net: inet6: do not leave a dangling sk pointer in inet6_create()
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error.
wifi: ath10k: avoid NULL pointer error during sdio remove
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: avoid NULL pointer error during sdio remove
When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio
workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON
is set to yes, kernel panic will happen:
Call trace:
destroy_workqueue+0x1c/0x258
ath10k_sdio_remove+0x84/0x94
sdio_bus_remove+0x50/0x16c
device_release_driver_internal+0x188/0x25c
device_driver_detach+0x20/0x2c
This is because during 'rmmod ath10k', ath10k_sdio_remove() will call
ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release()
will finally be called in a
In the Linux kernel, the following vulnerability has been resolved:
jfs: array-index-out-of-bounds fix in dtReadFirst
The value of stbl can be sometimes out of bounds due
to a bad filesystem. Added a check with appopriate return
of error code in that case.
In the Linux kernel, the following vulnerability has been resolved:
jfs: fix shift-out-of-bounds in dbSplit
When dmt_budmin is less than zero, it causes errors
in the later stages. Added a check to return an error beforehand
in dbAllocCtl itself.
In the Linux kernel, the following vulnerability has been resolved:
jfs: fix array-index-out-of-bounds in jfs_readdir
The stbl might contain some invalid values. Added a check to
return error code in that case.
jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree
In the Linux kernel, the following vulnerability has been resolved:
jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree
When the value of lp is 0 at the beginning of the for loop, it will
become negative in the next assignment and we should bail out.
drm/amdgpu: set the right AMDGPU sg segment limitation
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: set the right AMDGPU sg segment limitation
The driver needs to set the correct max_segment_size;
otherwise debug_dma_map_sg() will complain about the
over-mapping of the AMDGPU sg length as following:
WARNING: CPU: 6 PID: 1964 at kernel/dma/debug.c:1178 debug_dma_map_sg+0x2dc/0x370
[ 364.049444] Modules linked in: veth amdgpu(OE) amdxcp drm_exec gpu_sched drm_buddy drm_ttm_helper ttm(OE) drm_suballoc_helper drm_display_helper drm_kms_helper i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.
The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added
leds: class: Protect brightness_show() with led_cdev->led_access mutex
In the Linux kernel, the following vulnerability has been resolved:
leds: class: Protect brightness_show() with led_cdev->led_access mutex
There is NULL pointer issue observed if from Process A where hid device
being added which results in adding a led_cdev addition and later a
another call to access of led_cdev attribute from Process B can result
in NULL pointer issue.
Use mutex led_cdev->led_access to protect access to led->cdev and its
attribute inside brightness_show() and max_brightness_show() and also
update the comment for mutex that it should be used to protect the led
class device fields.
Process A Process B
kthread+0x114
f2fs: fix f2fs_bug_on when uninstalling filesystem call f2fs_evict_inode.
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix f2fs_bug_on when uninstalling filesystem call f2fs_evict_inode.
creating a large files during checkpoint disable until it runs out of
space and then delete it, then remount to enable checkpoint again, and
then unmount the filesystem triggers the f2fs_bug_on as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:896!
CPU: 2 UID: 0 PID: 1286 Comm: umount Not tainted 6.11.0-rc7-dirty #360
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:f2fs_evict_inode+0x58c/0x610
Call Trace:
__die_body+0x15/0x60
die+0x33/0x50
do_trap+0x10a/0x120
btrfs: ref-verify: fix use-after-free after invalid ref action
In the Linux kernel, the following vulnerability has been resolved:
btrfs: ref-verify: fix use-after-free after invalid ref action
At btrfs_ref_tree_mod() after we successfully inserted the new ref entry
(local variable 'ref') into the respective block entry's rbtree (local
variable 'be'), if we find an unexpected action of BTRFS_DROP_DELAYED_REF,
we error out and free the ref entry without removing it from the block
entry's rbtree. Then in the error path of btrfs_ref_tree_mod() we call
btrfs_free_ref_cache(), which iterates over all block entries and then
calls free_block_entry() for each one, and there we will trigger a
use-after-free whe
media: i2c: tc358743: Fix crash in the probe error path when using polling
In the Linux kernel, the following vulnerability has been resolved:
media: i2c: tc358743: Fix crash in the probe error path when using polling
If an error occurs in the probe() function, we should remove the polling
timer that was alarmed earlier, otherwise the timer is called with
arguments that are already freed, which results in a crash.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 0 at kernel/time/timer.c:1830 __run_timers+0x244/0x268
Modules linked in:
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.11.0 #226
Hardware name: Diasom DS-RK3568-SOM-EVB (DT)
pstate: 804000c9 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc
media: ts2020: fix null-ptr-deref in ts2020_probe()
In the Linux kernel, the following vulnerability has been resolved:
media: ts2020: fix null-ptr-deref in ts2020_probe()
KASAN reported a null-ptr-deref issue when executing the following
command:
# echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020]
RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809
RDX: 0000000000
media: platform: allegro-dvt: Fix possible memory leak in allocate_buffers_internal()
In the Linux kernel, the following vulnerability has been resolved:
media: platform: allegro-dvt: Fix possible memory leak in allocate_buffers_internal()
The buffer in the loop should be released under the exception path,
otherwise there may be a memory leak here.
To mitigate this, free the buffer when allegro_alloc_buffer fails.
ovl: Filter invalid inodes with missing lookup function
In the Linux kernel, the following vulnerability has been resolved:
ovl: Filter invalid inodes with missing lookup function
Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack.
ftrace: Fix regression with module command in stack_trace_filter
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix regression with module command in stack_trace_filter
When executing the following command:
# echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
The current mod command causes a null pointer dereference. While commit
0f17976568b3f ("ftrace: Fix regression with module command in stack_trace_filter")
has addressed part of the issue, it left a corner case unhandled, which still
results in a kernel crash.
ad7780: fix division by zero in ad7780_write_raw()
In the Linux kernel, the following vulnerability has been resolved:
ad7780: fix division by zero in ad7780_write_raw()
In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero.
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
if (dev->boardinfo && dev->boardinfo->init_dyn_addr)
^^^ here check "init_dyn_addr"
i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, ...)
^^^^
free "dyn_addr"
Fix copy/paste error "dyn_addr" by replacing it with "init_dyn_addr".
In the Linux kernel, the following vulnerability has been resolved:
nfsd: make sure exp active before svc_export_show
The function `e_show` was called with protection from RCU. This only
ensures that `exp` will not be freed. Therefore, the reference count for
`exp` can drop to zero, which will trigger a refcount use-after-free
warning when `exp_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `exp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 819 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted