wifi: mac80211: fix race condition on enabling fast-xmit
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix race condition on enabling fast-xmit
fast-xmit must only be enabled after the sta has been uploaded to the driver,
otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls
to the driver, leading to potential crashes because of uninitialized drv_priv
data.
Add a missing sta->uploaded check and re-check fast xmit after inserting a sta.
In the Linux kernel, the following vulnerability has been resolved:
fbdev: savage: Error out if pixclock equals zero
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.
Although pixclock is checked in savagefb_decode_var(), but it is not
checked properly in savagefb_probe(). Fix this by checking whether
pixclock is zero in the function savagefb_check_var() before
info->var.pixclock is used as the divisor.
This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b8.
In the Linux kernel, the following vulnerability has been resolved:
fbdev: sis: Error out if pixclock equals zero
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.
In sisfb_check_var(), var->pixclock is used as a divisor to caculate
drate before it is checked against zero. Fix this by checking it
at the beginning.
This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b8.
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
Determine if the group block bitmap is corrupted before using ac_b_ex in
ext4_mb_try_best_found() to avoid allocating blocks from a group with a
corrupted block bitmap in the following concurrency and making the
situation worse.
ext4_mb_regular_allocator
ext4_lock_group(sb, group)
ext4_mb_good_group
// check if the group bbitmap is corrupted
ext4_mb_complex_scan_group
// Scan group gets ac_b_ex but doesn't use it
ext4_unlock_group(sb, group)
ext4_mark_gro
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
Places the logic for checking if the group's block bitmap is corrupt under
the protection of the group lock to avoid allocating blocks from the group
with a corrupted block bitmap.
In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
Unfortunately the commit `fd8958efe877` introduced another error
causing the `descs` array to overflow. This reults in further crashes
easily reproducible by `sendmsg` system call.
[ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI
[ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1]
--
[ 1080.974535] Call Trace:
[ 1080.976990] <TASK>
[ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1]
[ 1081.027364] hfi1_ipoi
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
In the Linux kernel, the following vulnerability has been resolved:
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the
following kernel warning appears:
WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8
Call trace:
kiocb_set_cancel_fn+0x9c/0xa8
ffs_epfile_read_iter+0x144/0x1d0
io_read+0x19c/0x498
io_issue_sqe+0x118/0x27c
io_submit_sqes+0x25c/0x5fc
__arm64_sys_io_uring_enter+0x104/0xab0
invoke_syscall+0x58/0x11c
el0_svc_common+0xb4/0xf4
do_el0_svc+0x2c/0xb0
el0_svc+0x2c/0xa4
el0t_64_sync_handler+0x68/0xb4
el0t_64_sync+0x1a
dm-crypt: don't modify the data when using authenticated encryption
In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: don't modify the data when using authenticated encryption
It was said that authenticated encryption could produce invalid tag when
the data that is being encrypted is modified [1]. So, fix this problem by
copying the data into the clone bio first and then encrypt them inside the
clone bio.
This may reduce performance, but it is needed to prevent the user from
corrupting the device by writing data with O_DIRECT and modifying them at
the same time.
[1] https://lore.kernel.org/all/[email protected]/T/
gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()
In the Linux kernel, the following vulnerability has been resolved:
gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()
The gtp_net_ops pernet operations structure for the subsystem must be
registered before registering the generic netlink family.
Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:
general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-al
l2tp: pass correct message length to ip6_append_data
In the Linux kernel, the following vulnerability has been resolved:
l2tp: pass correct message length to ip6_append_data
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero
In the Linux kernel, the following vulnerability has been resolved:
ARM: ep93xx: Add terminator to gpiod_lookup_table
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
...
cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request);
list_del_init(&priv_req->list);
...
'priv_req' actually free at cdns3_gadget_ep_free_request(). But
list_del_init() use priv_req->list after it.
[ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4
[ 1542.642868][ T534]
[ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3):
[ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4
[ 1542.665375][ T534] cdns3
usb: cdns3: fix memory double free when handle zero packet
In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: fix memory double free when handle zero packet
829 if (request->complete) {
830 spin_unlock(&priv_dev->lock);
831 usb_gadget_giveback_request(&priv_ep->endpoint,
832 request);
833 spin_lock(&priv_dev->lock);
834 }
835
836 if (request->buf == priv_dev->zlp_buf)
837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
Driver append an additional zero packet request when queue a packet, which
length mod max packet size is 0. When transfer complete, run to line 831,
usb_gadget_giveback_requ
afs: Increase buffer size in afs_update_volume_status()
In the Linux kernel, the following vulnerability has been resolved:
afs: Increase buffer size in afs_update_volume_status()
The max length of volume->vid value is 20 characters.
So increase idbuf[] size up to 24 to avoid overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]
ipv6: sr: fix possible use-after-free and null-ptr-deref
In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: fix possible use-after-free and null-ptr-deref
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
In the Linux kernel, the following vulnerability has been resolved:
arp: Prevent overflow in arp_req_get().
syzkaller reported an overflown write in arp_req_get(). [0]
When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour
entry and copies neigh->ha to struct arpreq.arp_ha.sa_data.
The arp_ha here is struct sockaddr, not struct sockaddr_storage, so
the sa_data buffer is just 14 bytes.
In the splat below, 2 bytes are overflown to the next int field,
arp_flags. We initialise the field just after the memcpy(), so it's
not a problem.
However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN),
arp_netmask is overwritten
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
In the Linux kernel, the following vulnerability has been resolved:
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex
is left locked forever. That may lead to deadlock
when rt5645_jack_detect_work() is called for the second time.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
powerpc/kasan: Fix addr error caused by page alignment
In the Linux kernel, the following vulnerability has been resolved:
powerpc/kasan: Fix addr error caused by page alignment
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say bl
ext4: fix double-free of blocks due to wrong extents moved_len
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix double-free of blocks due to wrong extents moved_len
In ext4_move_extents(), moved_len is only updated when all moves are
successfully executed, and only discards orig_inode and donor_inode
preallocations when moved_len is not zero. When the loop fails to exit
after successfully moving some extents, moved_len is not updated and
remains at 0, so it does not discard the preallocations.
If the moved extents overlap with the preallocated extents, the
overlapped extents are freed twice in ext4_mb_release_inode_pa() and
ext4_process_freed_data() (as described in commit
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
In the Linux kernel, the following vulnerability has been resolved:
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
Recently, we encounter kernel crash in function rm3100_common_probe
caused by out of bound access of array rm3100_samp_rates (because of
underlying hardware failures). Add boundary check to prevent out of
bound access.