p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-gcp · Página 48

Vulnerabilidades publicadas para linux-gcp en los últimos 30 días: 0. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 3446

  1. CVE-2025-21735

    Alta · CVSS 8.8EPSS 0,38%Corrección disponible

    NFC: nci: Add bounds checking in nci_hci_create_pipe()

    In the Linux kernel, the following vulnerability has been resolved: NFC: nci: Add bounds checking in nci_hci_create_pipe() The "pipe" variable is a u8 which comes from the network. If it's more than 127, then it results in memory corruption in the caller, nci_hci_connect_gate().

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  2. CVE-2024-58017

    Media · CVSS 5.5EPSS 0,25%Corrección disponible

    printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX

    In the Linux kernel, the following vulnerability has been resolved: printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which leads to undefined behavior. To prevent this, cast 1 to u32 before performing the shift, ensuring well-defined behavior. This change explicitly avoids any potential overflow by ensuring that the shift occurs on an unsigned 32-bit integer.

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  3. CVE-2024-58014

    Alta · CVSS 7.1EPSS 0,22%Corrección disponible

    wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()

    In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE.

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  4. CVE-2024-58010

    Alta · CVSS 7.8EPSS 0,27%Corrección disponible

    binfmt_flat: Fix integer overflow bug on 32 bit systems

    In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix integer overflow bug on 32 bit systems Most of these sizes and counts are capped at 256MB so the math doesn't result in an integer overflow. The "relocs" count needs to be checked as well. Otherwise on 32bit systems the calculation of "full_data" could be wrong. full_data = data_len + relocs * sizeof(unsigned long);

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  5. CVE-2024-58009

    Media · CVSS 5.5EPSS 0,21%Corrección disponible

    Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc A NULL sock pointer is passed into l2cap_sock_alloc() when it is called from l2cap_sock_new_connection_cb() and the error handling paths should also be aware of it. Seemingly a more elegant solution would be to swap bt_sock_alloc() and l2cap_chan_create() calls since they are not interdependent to that moment but then l2cap_chan_create() adds the soon to be deallocated and still dummy-initialized channel to the global list accessible by many L2CAP paths. The channel would be removed from the list in short perio

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  6. CVE-2024-58007

    Alta · CVSS 7.1EPSS 0,25%Corrección disponible

    soc: qcom: socinfo: Avoid out of bounds read of serial number

    In the Linux kernel, the following vulnerability has been resolved: soc: qcom: socinfo: Avoid out of bounds read of serial number On MSM8916 devices, the serial number exposed in sysfs is constant and does not change across individual devices. It's always: db410c:/sys/devices/soc0$ cat serial_number 2644893864 The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not have support for the serial_num field in the socinfo struct. There is an existing check to avoid exposing the serial number in that case, but it's not correct: When checking the item_size returned by SMEM, we need to make sure the *end* of the serial_num

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  7. CVE-2024-58002

    Alta · CVSS 7.8EPSS 0,26%Corrección disponible

    media: uvcvideo: Remove dangling pointers

    In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Remove dangling pointers When an async control is written, we copy a pointer to the file handle that started the operation. That pointer will be used when the device is done. Which could be anytime in the future. If the user closes that file descriptor, its structure will be freed, and there will be one dangling pointer per pending async control, that the driver will try to use. Clean all the dangling pointers during release(). To avoid adding a performance penalty in the most common case (no async operation), a counter has been introduced with some logi

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  8. CVE-2024-58001

    Media · CVSS 5.7EPSS 0,23%Corrección disponible

    ocfs2: handle a symlink read error correctly

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: handle a symlink read error correctly Patch series "Convert ocfs2 to use folios". Mark did a conversion of ocfs2 to use folios and sent it to me as a giant patch for review ;-) So I've redone it as individual patches, and credited Mark for the patches where his code is substantially the same. It's not a bad way to do it; his patch had some bugs and my patches had some bugs. Hopefully all our bugs were different from each other. And hopefully Mark likes all the changes I made to his code! This patch (of 23): If we can't read the buffer, be sure to unlock the p

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  9. CVE-2025-21731

    Alta · CVSS 7.8EPSS 0,24%Corrección disponible

    nbd: don't allow reconnect after disconnect

    In the Linux kernel, the following vulnerability has been resolved: nbd: don't allow reconnect after disconnect Following process can cause nbd_config UAF: 1) grab nbd_config temporarily; 2) nbd_genl_disconnect() flush all recv_work() and release the initial reference: nbd_genl_disconnect nbd_disconnect_and_put nbd_disconnect flush_workqueue(nbd->recv_workq) if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...)) nbd_config_put -> due to step 1), reference is still not zero 3) nbd_genl_reconfigure() queue recv_work() again; nbd_genl_reconfigure config = nbd_get_config_unlocked(nbd) if (!config) -> suc

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  10. CVE-2025-21728

    Media · CVSS 5.5EPSS 0,21%Corrección disponible

    bpf: Send signals asynchronously if !preemptible

    In the Linux kernel, the following vulnerability has been resolved: bpf: Send signals asynchronously if !preemptible BPF programs can execute in all kinds of contexts and when a program running in a non-preemptible context uses the bpf_send_signal() kfunc, it will cause issues because this kfunc can sleep. Change `irqs_disabled()` to `!preemptible()`.

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  11. CVE-2025-21722

    Alta · CVSS 7.8EPSS 0,27%Corrección disponible

    nilfs2: do not force clear folio if buffer is referenced

    In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not force clear folio if buffer is referenced Patch series "nilfs2: protect busy buffer heads from being force-cleared". This series fixes the buffer head state inconsistency issues reported by syzbot that occurs when the filesystem is corrupted and falls back to read-only, and the associated buffer head use-after-free issue. This patch (of 2): Syzbot has reported that after nilfs2 detects filesystem corruption and falls back to read-only, inconsistencies in the buffer state may occur. One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  12. CVE-2025-21721

    Alta · CVSS 7.1EPSS 0,23%Corrección disponible

    nilfs2: handle errors that nilfs_prepare_chunk() may return

    In the Linux kernel, the following vulnerability has been resolved: nilfs2: handle errors that nilfs_prepare_chunk() may return Patch series "nilfs2: fix issues with rename operations". This series fixes BUG_ON check failures reported by syzbot around rename operations, and a minor behavioral issue where the mtime of a child directory changes when it is renamed instead of moved. This patch (of 2): The directory manipulation routines nilfs_set_link() and nilfs_delete_entry() rewrite the directory entry in the folio/page previously read by nilfs_find_entry(), so error handling is omitted on the assumption that nilfs_prepare_chunk(), which

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  13. CVE-2025-21719

    Alta · CVSS 7.1EPSS 0,21%Corrección disponible

    ipmr: do not call mr_mfc_uses_dev() for unres entries

    In the Linux kernel, the following vulnerability has been resolved: ipmr: do not call mr_mfc_uses_dev() for unres entries syzbot found that calling mr_mfc_uses_dev() for unres entries would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif alias to "struct sk_buff_head unresolved", which contain two pointers. This code never worked, lets remove it. [1] Unable to handle kernel paging request at virtual address ffff5fff2d536613 KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f] Modules linked in: CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0 Hardware name:

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  14. CVE-2025-21718

    Alta · CVSS 7.8EPSS 0,17%Corrección disponible

    net: rose: fix timer races against user threads

    In the Linux kernel, the following vulnerability has been resolved: net: rose: fix timer races against user threads Rose timers only acquire the socket spinlock, without checking if the socket is owned by one user thread. Add a check and rearm the timers if needed. BUG: KASAN: slab-use-after-free in rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174 Read of size 2 at addr ffff88802f09b82a by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_st

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  15. CVE-2025-21715

    Alta · CVSS 7.8EPSS 0,24%Corrección disponible

    net: davicom: fix UAF in dm9000_drv_remove

    In the Linux kernel, the following vulnerability has been resolved: net: davicom: fix UAF in dm9000_drv_remove dm is netdev private data and it cannot be used after free_netdev() call. Using dm after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. This is similar to the issue fixed in commit ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove"). This bug is detected by our static analysis tool.

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  16. CVE-2025-21708

    Media · CVSS 5.5EPSS 0,22%Corrección disponible

    net: usb: rtl8150: enable basic endpoint checking

    In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: enable basic endpoint checking Syzkaller reports [1] encountering a common issue of utilizing a wrong usb endpoint type during URB submitting stage. This, in turn, triggers a warning shown below. For now, enable simple endpoint checking (specifically, bulk and interrupt eps, testing control one is not essential) to mitigate the issue with a view to do other related cosmetic changes later, if they are necessary. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  17. CVE-2024-57986

    Alta · CVSS 7.1EPSS 0,32%Corrección disponible

    HID: core: Fix assumption that Resolution Multipliers must be in Logical Collections

    In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix assumption that Resolution Multipliers must be in Logical Collections A report in 2019 by the syzbot fuzzer was found to be connected to two errors in the HID core associated with Resolution Multipliers. One of the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop in hid_apply_multiplier."), but the other has not been fixed. This error arises because hid_apply_multipler() assumes that every Resolution Multiplier control is contained in a Logical Collection, i.e., there's no way the routine can ever set multiplier_collection to NULL. This is

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  18. CVE-2024-57981

    Media · CVSS 5.5EPSS 0,27%Corrección disponible

    usb: xhci: Fix NULL pointer dereference on certain command aborts

    In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix NULL pointer dereference on certain command aborts If a command is queued to the final usable TRB of a ring segment, the enqueue pointer is advanced to the subsequent link TRB and no further. If the command is later aborted, when the abort completion is handled the dequeue pointer is advanced to the first TRB of the next segment. If no further commands are queued, xhci_handle_stopped_cmd_ring() sees the ring pointers unequal and assumes that there is a pending command, so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL. Don't attempt timer s

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  19. CVE-2024-57980

    Alta · CVSS 7.8EPSS 0,27%Corrección disponible

    media: uvcvideo: Fix double free in error path

    In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix double free in error path If the uvc_status_init() function fails to allocate the int_urb, it will free the dev->status pointer but doesn't reset the pointer to NULL. This results in the kfree() call in uvc_status_cleanup() trying to double-free the memory. Fix it by resetting the dev->status pointer to NULL after freeing it. Reviewed by: Ricardo Ribalda <[email protected]>

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización
  20. CVE-2024-57979

    Alta · CVSS 7.8EPSS 0,27%Corrección disponible

    pps: Fix a use-after-free

    In the Linux kernel, the following vulnerability has been resolved: pps: Fix a use-after-free On a board running ntpd and gpsd, I'm seeing a consistent use-after-free in sys_exit() from gpsd when rebooting: pps pps1: removed ------------[ cut here ]------------ kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called. WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150 CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1 Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=-

    • Actualiza a 5.4.0-1149.158
    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →