xen: Fix the issue of resource not being properly released in xenbus_dev_probe()
In the Linux kernel, the following vulnerability has been resolved:
xen: Fix the issue of resource not being properly released in xenbus_dev_probe()
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perf
Alta · CVSS 7.8EPSS 4,12%En el catálogo KEVCorrección disponible
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.
PCI: Fix use-after-free of slot->bus on hot remove
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix use-after-free of slot->bus on hot remove
Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock.
Since commit 0fc70886569c ("thunderbolt: Reset USB4 v2 host router") and
commit 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot
firmware"), USB4 v2 and v1 Host Routers are reset on probe of the
thunderbolt driver.
The reset clears the Presence Detect State and Data Link Layer Link Active
bits at the USB4 Host Router's Root Port and thus causes hot removal of the
dock.
The crash occurs when pciehp is unbound from one of the dock's Downst
In the Linux kernel, the following vulnerability has been resolved:
um: ubd: Do not use drvdata in release
The drvdata is not available in release. Let's just use container_of()
to get the ubd instance. Otherwise, removing a ubd device will result
in a crash:
RIP: 0033:blk_mq_free_tag_set+0x1f/0xba
RSP: 00000000e2083bf0 EFLAGS: 00010246
RAX: 000000006021463a RBX: 0000000000000348 RCX: 0000000062604d00
RDX: 0000000004208060 RSI: 00000000605241a0 RDI: 0000000000000348
RBP: 00000000e2083c10 R08: 0000000062414010 R09: 00000000601603f7
R10: 000000000000133a R11: 000000006038c4bd R12: 0000000000000000
R13: 0000000060213a5c R14: 0000000062405d20
In the Linux kernel, the following vulnerability has been resolved:
um: net: Do not use drvdata in release
The drvdata is not available in release. Let's just use container_of()
to get the uml_net instance. Otherwise, removing a network device will
result in a crash:
RIP: 0033:net_device_release+0x10/0x6f
RSP: 00000000e20c7c40 EFLAGS: 00010206
RAX: 000000006002e4e7 RBX: 00000000600f1baf RCX: 00000000624074e0
RDX: 0000000062778000 RSI: 0000000060551c80 RDI: 00000000627af028
RBP: 00000000e20c7c50 R08: 00000000603ad594 R09: 00000000e20c7b70
R10: 000000000000135a R11: 00000000603ad422 R12: 0000000000000000
R13: 0000000062c7af00 R14: 000000006
In the Linux kernel, the following vulnerability has been resolved:
um: vector: Do not use drvdata in release
The drvdata is not available in release. Let's just use container_of()
to get the vector_device instance. Otherwise, removing a vector device
will result in a crash:
RIP: 0033:vector_device_release+0xf/0x50
RSP: 00000000e187bc40 EFLAGS: 00010202
RAX: 0000000060028f61 RBX: 00000000600f1baf RCX: 00000000620074e0
RDX: 000000006220b9c0 RSI: 0000000060551c80 RDI: 0000000000000000
RBP: 00000000e187bc50 R08: 00000000603ad594 R09: 00000000e187bb70
R10: 000000000000135a R11: 00000000603ad422 R12: 00000000623ae028
R13: 000000006287a200 R14:
SUNRPC: make sure cache entry active before cache_show
In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: make sure cache entry active before cache_show
The function `c_show` was called with protection from RCU. This only
ensures that `cp` will not be freed. Therefore, the reference count for
`cp` can drop to zero, which will trigger a refcount use-after-free
warning when `cache_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `cp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 822 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 7 UID: 0 PID: 822 Comm: cat Not tai
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
In the Linux kernel, the following vulnerability has been resolved:
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
Yang Erkun reports that when two threads are opening files at the same
time, and are forced to abort before a reply is seen, then the call to
nfs_release_seqid() in nfs4_opendata_free() can result in a
use-after-free of the pointer to the defunct rpc task of the other
thread.
The fix is to ensure that if the RPC call is aborted before the call to
nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid()
in nfs4_open_release() before the rpc_task is freed.
ubi: fastmap: Fix duplicate slab cache names while attaching
In the Linux kernel, the following vulnerability has been resolved:
ubi: fastmap: Fix duplicate slab cache names while attaching
Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), the duplicate slab cache names can be detected and a
kernel WARNING is thrown out.
In UBI fast attaching process, alloc_ai() could be invoked twice
with the same slab cache name 'ubi_aeb_slab_cache', which will trigger
following warning messages:
kmem_cache of name 'ubi_aeb_slab_cache' already exists
WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107
__kmem_cache_create_args+0x100/0x5f0
Modules linked in: ubi(+) nandsim
ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit
In the Linux kernel, the following vulnerability has been resolved:
ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit
After an insertion in TNC, the tree might split and cause a node to
change its `znode->parent`. A further deletion of other nodes in the
tree (which also could free the nodes), the aforementioned node's
`znode->cparent` could still point to a freed node. This
`znode->cparent` may not be updated when getting nodes to commit in
`ubifs_tnc_start_commit()`. This could then trigger a use-after-free
when accessing the `znode->cparent` in `write_index()` in
`ubifs_tnc_end_commit()`.
This can be triggered by running
sh: intc: Fix use-after-free bug in register_intc_controller()
In the Linux kernel, the following vulnerability has been resolved:
sh: intc: Fix use-after-free bug in register_intc_controller()
In the error handling for this function, d is freed without ever
removing it from intc_list which would lead to a use after free.
To fix this, let's only add it to the list after everything has
succeeded.
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
In the Linux kernel, the following vulnerability has been resolved:
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected,
cpu_max_bits_warn() generates a runtime warning similar as below when
showing /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
[ 3.052463] ------------[ cut here ]------------
[ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[ 3.070072] Modules linked in: efivarfs autofs4
[ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[
In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix ordering of qlen adjustment
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty.
In the linux kernel, if IMA appraisal is used with the "ima_appraise=log" boot param, lockdown can be defeated with kexec on any machine when Secure Boot is disabled or unavailable. IMA prevents setting "ima_appraise=log" from the boot param when Secure Boot is enabled, but this does not cover cases where lockdown is used without Secure Boot. CVSS 3.1 Base Score 6.7 (Confidentiality, Integrity, Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H).
In the Linux kernel, the following vulnerability has been resolved:
EDAC/bluefield: Fix potential integer overflow
The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx
left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as
32-bits wide the left-shift operation truncates the upper 16 bits of
information during the calculation of the SMC argument.
The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any
potential integer overflow, i.e. loss of data from upper 16 bits.
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array.
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
Fix a kernel crash with the below call trace when the SCPI firmware
returns OPP count of zero.
dvfs_info.opp_count may be zero on some platforms during the reboot
test, and the kernel will crash after dereferencing the pointer to
kcalloc(info->count, sizeof(*opp), GFP_KERNEL).
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
| Mem abort info:
| ESR = 0x96000004
| Exception class = DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0,
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constpr
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
Syzbot has reported the following KMSAN splat:
BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80
ocfs2_file_read_iter+0x9a4/0xf80
__io_read+0x8d4/0x20f0
io_read+0x3e/0xf0
io_issue_sqe+0x42b/0x22c0
io_wq_submit_work+0xaf9/0xdc0
io_worker_handle_work+0xd13/0x2110
io_wq_worker+0x447/0x1410
ret_from_fork+0x6f/0x90
ret_from_fork_asm+0x1a/0x30
Uninit was created at:
__alloc_pages_noprof+0x9a7/0xe00
alloc_pages_mpol_noprof+0x299/0x990
alloc_pages_noprof+0x1bf/0x1e0
allocate_slab+0x33a/0x1250
___sla
Alta · CVSS 7.1EPSS 1,35%En el catálogo KEVCódigo de explotación públicoCorrección disponible
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against