p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-ibm · Página 90

Vulnerabilidades publicadas para linux-ibm en los últimos 30 días: 0. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 3088

  1. CVE-2024-42145

    Alta · CVSS 7.5EPSS 0,87%Corrección disponible

    IB/core: Implement a limit on UMAD receive List

    In the Linux kernel, the following vulnerability has been resolved: IB/core: Implement a limit on UMAD receive List The existing behavior of ib_umad, which maintains received MAD packets in an unbounded list, poses a risk of uncontrolled growth. As user-space applications extract packets from this list, the rate of extraction may not match the rate of incoming packets, leading to potential list overflow. To address this, we introduce a limit to the size of the list. After considering typical scenarios, such as OpenSM processing, which can handle approximately 100k packets per second, and the 1-second retry timeout for most packets, we set

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  2. CVE-2024-42131

    Media · CVSS 4.4EPSS 0,25%Corrección disponible

    mm: avoid overflows in dirty throttling logic

    In the Linux kernel, the following vulnerability has been resolved: mm: avoid overflows in dirty throttling logic The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn't so simple as the dirty limit is c

    • Actualiza a 5.4.0-1082.87
    Publicación Actualización
  3. CVE-2024-42127

    Media · CVSS 5.5EPSS 0,24%Corrección disponible

    drm/lima: fix shared irq handling on driver remove

    In the Linux kernel, the following vulnerability has been resolved: drm/lima: fix shared irq handling on driver remove lima uses a shared interrupt, so the interrupt handlers must be prepared to be called at any time. At driver removal time, the clocks are disabled early and the interrupts stay registered until the very end of the remove process due to the devm usage. This is potentially a bug as the interrupts access device registers which assumes clocks are enabled. A crash can be triggered by removing the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled. This patch frees the interrupts at each lima device finishing callback so that the

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  4. CVE-2024-42124

    Media · CVSS 5.5EPSS 0,26%Corrección disponible

    scsi: qedf: Make qedf_execute_tmf() non-preemptible

    In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Make qedf_execute_tmf() non-preemptible Stop calling smp_processor_id() from preemptible code in qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel. [ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646 [ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf]

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  5. CVE-2024-42119

    Alta · CVSS 7.8EPSS 0,28%Corrección disponible

    drm/amd/display: Skip finding free audio for unknown engine_id

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip finding free audio for unknown engine_id [WHY] ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it also means it is uninitialized and does not need free audio. [HOW] Skip and return NULL. This fixes 2 OVERRUN issues reported by Coverity.

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  6. CVE-2024-42115

    Alta · CVSS 7.8EPSS 0,26%Corrección disponible

    jffs2: Fix potential illegal address access in jffs2_free_inode

    In the Linux kernel, the following vulnerability has been resolved: jffs2: Fix potential illegal address access in jffs2_free_inode During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  7. CVE-2024-42106

    Media · CVSS 5.5EPSS 0,27%Corrección disponible

    inet_diag: Initialize pad field in struct inet_diag_req_v2

    In the Linux kernel, the following vulnerability has been resolved: inet_diag: Initialize pad field in struct inet_diag_req_v2 KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  8. CVE-2024-42105

    Alta · CVSS 7.8EPSS 0,26%Corrección disponible

    nilfs2: fix inode number range checks

    In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix inode number range checks Patch series "nilfs2: fix potential issues related to reserved inodes". This series fixes one use-after-free issue reported by syzbot, caused by nilfs2's internal inode being exposed in the namespace on a corrupted filesystem, and a couple of flaws that cause problems if the starting number of non-reserved inodes written in the on-disk super block is intentionally (or corruptly) changed from its default value. This patch (of 3): In the current implementation of nilfs2, "nilfs->ns_first_ino", which gives the first non-reserved inod

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  9. CVE-2024-42104

    Alta · CVSS 7.8EPSS 0,26%Corrección disponible

    nilfs2: add missing check for inode numbers on directory entries

    In the Linux kernel, the following vulnerability has been resolved: nilfs2: add missing check for inode numbers on directory entries Syzbot reported that mounting and unmounting a specific pattern of corrupted nilfs2 filesystem images causes a use-after-free of metadata file inodes, which triggers a kernel bug in lru_add_fn(). As Jan Kara pointed out, this is because the link count of a metadata file gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(), tries to delete that inode (ifile inode in this case). The inconsistency occurs because directories containing the inode numbers of these metadata files that should no

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  10. CVE-2024-42102

    Media · CVSS 4.7EPSS 0,26%Corrección disponible

    Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"

    In the Linux kernel, the following vulnerability has been resolved: Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again" Patch series "mm: Avoid possible overflows in dirty throttling". Dirty throttling logic assumes dirty limits in page units fit into 32-bits. This patch series makes sure this is true (see patch 2/2 for more details). This patch (of 2): This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78. The commit is broken in several ways. Firstly, the removed (u64) cast from the multiplication will introduce a multiplication overflow on 32-bit archs if wb_thresh * bg_thresh >= 1<<32 (which is a

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  11. CVE-2024-42101

    Media · CVSS 5.7EPSS 0,26%Corrección disponible

    drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes

    In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes In nouveau_connector_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  12. CVE-2024-42097

    Alta · CVSS 7.8EPSS 0,23%Corrección disponible

    ALSA: emux: improve patch ioctl data validation

    In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: improve patch ioctl data validation In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did.

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  13. CVE-2024-42096

    Media · CVSS 5.5EPSS 0,24%Corrección disponible

    x86: stop playing stack games in profile_pc()

    In the Linux kernel, the following vulnerability has been resolved: x86: stop playing stack games in profile_pc() The 'profile_pc()' function is used for timer-based profiling, which isn't really all that relevant any more to begin with, but it also ends up making assumptions based on the stack layout that aren't necessarily valid. Basically, the code tries to account the time spent in spinlocks to the caller rather than the spinlock, and while I support that as a concept, it's not worth the code complexity or the KASAN warnings when no serious profiling is done using timers anyway these days. And the code really does depend on stack layo

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  14. CVE-2024-42094

    Alta · CVSS 7.1EPSS 0,24%Corrección disponible

    net/iucv: Avoid explicit cpumask var allocation on stack

    In the Linux kernel, the following vulnerability has been resolved: net/iucv: Avoid explicit cpumask var allocation on stack For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it.

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  15. CVE-2024-42093

    Alta · CVSS 7.3EPSS 0,23%Corrección disponible

    net/dpaa2: Avoid explicit cpumask var allocation on stack

    In the Linux kernel, the following vulnerability has been resolved: net/dpaa2: Avoid explicit cpumask var allocation on stack For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it.

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  16. CVE-2024-42092

    Alta · CVSS 7.8EPSS 0,22%Corrección disponible

    gpio: davinci: Validate the obtained number of IRQs

    In the Linux kernel, the following vulnerability has been resolved: gpio: davinci: Validate the obtained number of IRQs Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken DT due to any error this value can be any. Without this value validation there can be out of chips->irqs array boundaries access in davinci_gpio_probe(). Validate the obtained nirq value so that it won't exceed the maximum number of IRQs per bank. Found by Linux Verification Center (linuxtesting.org) with SVACE.

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  17. CVE-2024-42090

    Media · CVSS 5.5EPSS 0,19%Corrección disponible

    pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER

    In the Linux kernel, the following vulnerability has been resolved: pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER In create_pinctrl(), pinctrl_maps_mutex is acquired before calling add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl() calls pinctrl_free(). However, pinctrl_free() attempts to acquire pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to a potential deadlock. This patch resolves the issue by releasing pinctrl_maps_mutex before calling pinctrl_free(), preventing the deadlock. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAS

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  18. CVE-2024-42089

    Media · CVSS 5.5EPSS 0,23%Corrección disponible

    ASoC: fsl-asoc-card: set priv->pdev before using it

    In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl-asoc-card: set priv->pdev before using it priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note that if priv->dev is dereferenced before assignment but never used, for example if there is no error to be printed, the driver won't crash probably due

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  19. CVE-2024-42087

    Media · CVSS 5.5EPSS 0,23%Corrección disponible

    drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep

    In the Linux kernel, the following vulnerability has been resolved: drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep The ilitek-ili9881c controls the reset GPIO using the non-sleeping gpiod_set_value() function. This complains loudly when the GPIO controller needs to sleep. As the caller can sleep, use gpiod_set_value_cansleep() to fix the issue.

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización
  20. CVE-2024-42086

    Alta · CVSS 7.8EPSS 0,24%Corrección disponible

    iio: chemical: bme680: Fix overflows in compensate() functions

    In the Linux kernel, the following vulnerability has been resolved: iio: chemical: bme680: Fix overflows in compensate() functions There are cases in the compensate functions of the driver that there could be overflows of variables due to bit shifting ops. These implications were initially discussed here [1] and they were mentioned in log message of Commit 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor"). [1]: https://lore.kernel.org/linux-iio/20180728114028.3c1bbe81@archlinux/

    • Actualiza a 5.4.0-1079.84
    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →