cpufreq: governor: Use kobject release() method to free dbs_data
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: governor: Use kobject release() method to free dbs_data
The struct dbs_data embeds a struct gov_attr_set and
the struct gov_attr_set embeds a kobject. Since every kobject must have
a release() method and we can't use kfree() to free it directly,
so introduce cpufreq_dbs_data_release() to release the dbs_data via
the kobject::release() method. This fixes the calltrace like below:
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34
WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
Mo
mtd: rawnand: denali: Use managed device resources
In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: denali: Use managed device resources
All of the resources used by this driver has managed interfaces, so use
them. Otherwise we will get the following splat:
[ 4.472703] denali-nand-pci 0000:00:05.0: timeout while waiting for irq 0x1000
[ 4.474071] denali-nand-pci: probe of 0000:00:05.0 failed with error -5
[ 4.473538] nand: No NAND device found
[ 4.474068] BUG: unable to handle page fault for address: ffffc90005000410
[ 4.475169] #PF: supervisor write access in kernel mode
[ 4.475579] #PF: error_code(0x0002) - not-present page
[ 4.478362
media: i2c: max9286: fix kernel oops when removing module
In the Linux kernel, the following vulnerability has been resolved:
media: i2c: max9286: fix kernel oops when removing module
When removing the max9286 module we get a kernel oops:
Unable to handle kernel paging request at virtual address 000000aa00000094
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000880d85000
[000000aa00000094] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
M
HID: elan: Fix potential double free in elan_input_configured
In the Linux kernel, the following vulnerability has been resolved:
HID: elan: Fix potential double free in elan_input_configured
'input' is a managed resource allocated with devm_input_allocate_device(),
so there is no need to call input_free_device() explicitly or
there will be a double free.
According to the doc of devm_input_allocate_device():
* Managed input devices do not need to be explicitly unregistered or
* freed as it will be done automatically when owner device unbinds from
* its driver (or binding fails).
regulator: da9121: Fix uninit-value in da9121_assign_chip_model()
In the Linux kernel, the following vulnerability has been resolved:
regulator: da9121: Fix uninit-value in da9121_assign_chip_model()
KASAN report slab-out-of-bounds in __regmap_init as follows:
BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841
Read of size 1 at addr ffff88803678cdf1 by task xrun/9137
CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88
print_report.cold+0xcd/0x69b mm/kasan/report.c:313
kasan_report+0x8e/0xc0 mm/kasan/repo
In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Add vblank register/unregister callback functions
We encountered a kernel panic issue that callback data will be NULL when
it's using in ovl irq handler. There is a timing issue between
mtk_disp_ovl_irq_handler() and mtk_ovl_disable_vblank().
To resolve this issue, we use the flow to register/unregister vblank cb:
- Register callback function and callback data when crtc creates.
- Unregister callback function and callback data when crtc destroies.
With this solution, we can assure callback data will not be NULL when
vblank is disable.
In the Linux kernel, the following vulnerability has been resolved:
NFC: NULL out the dev->rfkill to prevent UAF
Commit 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device")
assumes the device_is_registered() in function nfc_dev_up() will help
to check when the rfkill is unregistered. However, this check only
take effect when device_del(&dev->dev) is done in nfc_unregister_device().
Hence, the rfkill object is still possible be dereferenced.
The crash trace in latest kernel (5.18-rc2):
[ 68.760105] ==================================================================
[ 68.760330] BUG: KASAN: use-after-free in __lock_acquire
ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix
In the Linux kernel, the following vulnerability has been resolved:
ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix
The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to
ensure that it is within the bitmap.
drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept()
error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()'
In the Linux kernel, the following vulnerability has been resolved:
media: rga: fix possible memory leak in rga_probe
rga->m2m_dev needs to be freed when rga_probe fails.
usbnet: Run unregister_netdev() before unbind() again
In the Linux kernel, the following vulnerability has been resolved:
usbnet: Run unregister_netdev() before unbind() again
Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()")
sought to fix a use-after-free on disconnect of USB Ethernet adapters.
It turns out that a different fix is necessary to address the issue:
https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/
So the commit was not necessary.
The commit made binding and unbinding of USB Ethernet asymmetrical:
Before, usbnet_probe() first invoked the ->bind() callback and then
register_netdev(). usbnet_disconnect(
ALSA: pcm: Check for null pointer of pointer substream before dereferencing it
In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Check for null pointer of pointer substream before dereferencing it
Pointer substream is being dereferenced on the assignment of pointer card
before substream is being null checked with the macro PCM_RUNTIME_CHECK.
Although PCM_RUNTIME_CHECK calls BUG_ON, it still is useful to perform the
the pointer check before card is assigned.
In the Linux kernel, the following vulnerability has been resolved:
net: remove two BUG() from skb_checksum_help()
I have a syzbot report that managed to get a crash in skb_checksum_help()
If syzbot can trigger these BUG(), it makes sense to replace
them with more friendly WARN_ON_ONCE() since skb_checksum_help()
can instead return an error code.
Note that syzbot will still crash there, until real bug is fixed.
drm/msm/hdmi: check return value after calling platform_get_resource_byname()
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/hdmi: check return value after calling platform_get_resource_byname()
It will cause null-ptr-deref if platform_get_resource_byname() returns NULL,
we need check the return value.
Patchwork: https://patchwork.freedesktop.org/patch/482992/
mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()
In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
In the Linux kernel, the following vulnerability has been resolved:
ASoC: rt5645: Fix errorenous cleanup order
There is a logic error when removing rt5645 device as the function
rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and
delete the &rt5645->btn_check_timer latter. However, since the timer
handler rt5645_btn_check_callback() will re-queue the jack_detect_work,
this cleanup order is buggy.
That is, once the del_timer_sync in rt5645_i2c_remove is concurrently
run with the rt5645_btn_check_callback, the canceled jack_detect_work
will be rescheduled again, leading to possible use-after-free.
This patch fix the issue by
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
In nvme_alloc_admin_tags, the admin_q can be set to an error (typically
-ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which
is checked immediately after the call. However, when we return the error
message up the stack, to nvme_reset_work the error takes us to
nvme_remove_dead_ctrl()
nvme_dev_disable()
nvme_suspend_queue(&dev->queues[0]).
Here, we only check that the admin_q is non-NULL, rather than not
an error or NULL, and begin quiescing a queue that never existed, leading
to bad /
drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()
In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()
It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected
mdp5_get_global_state runs the risk of hitting a -EDEADLK when acquiring
the modeset lock, but currently mdp5_pipe_release doesn't check for if
an error is returned. Because of this, there is a possibility of
mdp5_pipe_release hitting a NULL dereference error.
To avoid this, let's have mdp5_pipe_release check if
mdp5_get_global_state returns an error and propogate that error.
Changes since v1:
- Separated declaration and initialization of *new_state to avoid
compiler warning
- Fixed some spel
drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume
BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3
Call trace:
dpu_vbif_init_memtypes+0x40/0xb8
dpu_runtime_resume+0xcc/0x1c0
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x134/0x258
__rpm_callback+0x98/0x138
rpm_callback+0x30/0x88
rpm_resume+0x36c/0x49c
__pm_runtime_resume+0x80/0xb0
dpu_core_irq_uninstall+0x30/0xb0
dpu_irq_uninstall+0x18/0x24
msm_drm_uninit+0xd8/0x16c
Patchw
drm/msm/mdp5: Return error code in mdp5_mixer_release when deadlock is detected
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/mdp5: Return error code in mdp5_mixer_release when deadlock is detected
There is a possibility for mdp5_get_global_state to return
-EDEADLK when acquiring the modeset lock, but currently global_state in
mdp5_mixer_release doesn't check for if an error is returned.
To avoid a NULL dereference error, let's have mdp5_mixer_release
check if an error is returned and propagate that error.
Patchwork: https://patchwork.freedesktop.org/patch/485181/