bpf: check_cond_jmp_op(): properly infer if register is null
In the Linux kernel, the following vulnerability has been resolved:
bpf: check_cond_jmp_op(): properly infer if register is null
Nicholas Carlini reported a bug when verifier can incorrectly infer
that a pointer is non-null. The bug occurs when two pointers are
compared and one of them has a type w/o PTR_MAYBE_NULL flag,
but which allows a value to be NULL at runtime.
Here is an example:
// `a` is PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED
// `a` is 0 at runtime.
// `b` is PTR_TO_MAP_VALUE | PTR_MAYBE_NULL
void *a = bpf_rdonly_cast(0, 0);
int *b = bpf_map_lookup_elem(...);
if (a == b)
*b = 42; // verifier does not catch nul
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers.
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
a
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it.
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error case
Media · CVSS 5.5EPSS 0,13%Sin corrección publicada
smb/client: validate new EOF for insert range
In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M c
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
smb/client: validate new EOF for zero range
In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for zero range
When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE,
smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing
the file to grow beyond the caller's file-size limit.
Fix this by calling inode_newsize_ok() before sending the zero-range
request when the operation would extend EOF.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072
truncate -s 2M "$FILE"
fallocate --zero-range -o 0 -l 4M "$FILE"
ech
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
smb/client: fix stale page cache in insert/collapse range
In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K
Media · CVSS 5.5EPSS 0,19%Sin corrección publicada
smb/client: invalidate fscache for fallocate range operations
In the Linux kernel, the following vulnerability has been resolved:
smb/client: invalidate fscache for fallocate range operations
smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and
smb3_collapse_range() modify file contents through server-side range
operations. These operations discard the affected page cache, but leave
the FS-Cache cookie valid, so a later read may return data cached before
the range operation.
Fix this by invalidating FS-Cache after outstanding I/O has completed
and before modifying the file on the server.
Run the following as root on a CIFS mount with fsc enabled and an active
CacheFiles backend:
b
sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration
sctp_verify_asconf() walks ASCONF-ACK parameters with
sctp_walk_params(), which advances by SCTP_PAD4(length), while the
consumer sctp_get_asconf_response() iterates the same parameters
advancing by the raw length, without padding. A single odd-length
parameter desynchronises the two walks and makes the consumer
interpret attacker-controlled bytes at a misaligned offset.
When those bytes yield a length of zero, the while loop over
asconf_ack_len makes no progress, spinning forever in softirq
context, and th
vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del()
In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del()
vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every
MDBE_ATTR_SRC_LIST member, accepts the all-zeros address.
A source list is only accepted on a (*, G) entry, whose source is the
all-zeros address, and for each member of the list an (S, G) entry is
derived from it by substituting the source. Entries are keyed by a plain
memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present
and holds the all-zeros address and the source list holds it as well, the
derived (S, G) key is byte-
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
watchdog: msc313e: Fix NULL pointer dereference in PM callbacks
In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix NULL pointer dereference in PM callbacks
msc313e_wdt_probe() doesn't set the driver data for the platform device.
As a result, dev_get_drvdata() in msc313e_wdt_suspend() and
msc313e_wdt_resume() will return NULL, leading to a NULL pointer
dereference afterward.
Set the platform device driver data in msc313e_wdt_probe().
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation
with an mmap_count check performed under the PCM stream lock, but the
lock is released long before the buffer is actually freed:
snd_pcm_sync_stop(), constraint refinement and do_free_pages() all
happen in between. snd_pcm_mmap_data(), on the other hand, takes no
lock at all: it validates against the old buffer's state and
dma_bytes, remaps its pages into the VMA, and only then increments
mmap_count.
A concurrent mmap() can therefore s
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely drain sessions during logoff
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize se
Media · CVSS 5.5EPSS 0,12%Sin corrección publicada
ksmbd: propagate DACL parsing errors
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: propagate DACL parsing errors
parse_dacl() silently accepts truncated ACEs and allocation failures,
allowing set_info_sec() to continue with an incomplete ACL conversion.
Return parsing and allocation errors to parse_sec_desc() so malformed
security descriptors are rejected before inode attributes or ACL xattrs
are updated.
Media · CVSS 5.5EPSS 0,15%Sin corrección publicada
ksmbd: rate limit unmapped SID errors
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: rate limit unmapped SID errors
A client can include many structurally valid but unmapped SIDs in a DACL.
Logging every mapping failure lets one request generate hundreds of kernel
error messages.
Rate limit the message to prevent an authenticated client from flooding
the kernel log.
Bluetooth: btintel: validate version TLV value lengths
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate version TLV value lengths
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field.
Media · CVSS 4.7EPSS 0,09%Sin corrección publicada
Bluetooth: hci_core: Fix race condition during device registration
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix race condition during device registration
In hci_register_dev(), the power_on work item is queued to
hdev->req_workqueue before initializing hdev->adv_monitors_idr and
registering the MSFT extension via msft_register(). For devices marked with
quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on
the device. When the power_on work item runs concurrently on another CPU,
hci_power_on() detects that the device is unconfigured and immediately
invokes hci_dev_do_close(), which calls msft_do_close().
Concurrently, msft_register() alloc
Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan
l2cap_new_connection() sets default value of channel mode to match the
parent channel. l2cap_le_connect_req() left this at the default, and
created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that
mode. This causes FLAG_DEFER_SETUP channels to reply to
L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect.
It can also result to stack OOB write (of l2cap_alloc_cid determined
values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not
limit maximum number of deferred channel
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for t