Media · CVSS 6.7EPSS 0,18%Sin corrección publicada
wifi: mac80211: handle empty FILS association request payload
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and th
USB: serial: fix dynamic id driver deregistration race
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix dynamic id driver deregistration race
Only free the dynamic ids after having deregistered the driver and
removed the "new_id" attribute to avoid leaking any id added by a racing
write to the attribute.
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix driver deregistration order
USB serial driver modules register one driver for the USB bus and one or
more drivers for the ports on the USB serial bus.
When unloading a driver module, the USB driver must be deregistered
before the USB serial bus drivers so that I/O is stopped before
unbinding the ports to avoid use-after-free in completion handlers
accessing port data.
Note that the "new_id" attributes must first be removed to prevent new
ids from being added and triggering a probe of the USB driver after it
has been deregistered.
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix ioctl hangup race
The tty ioctls can race with hangup and end up calling into a tty driver
for a device that is already gone or powered down.
Serialise the callbacks using the tty port mutex and add the missing
checks to make sure the port has not been hung up before accessing port
driver data or hardware.
This specifically avoids dereferencing a NULL-pointer if a device is
disconnected during lengthy break signalling.
Note that TIOCGICOUNT and TIOCMIWAIT do not access port driver data or
hardware and are therefore not affected by the race.
Media · CVSS 4.3EPSS 0,18%Sin corrección publicada
thunderbolt: Fix KASAN reported use-after-free when request is canceled
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix KASAN reported use-after-free when request is canceled
Alan reported that when doing stress testing sometimes KASAN notices
use-after-free during control channel operation (stripped down keeping
the relevant parts):
BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt]
Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760
<TASK>
tb_cfg_request_sync+0x240/0x250 [thunderbolt]
tb_cfg_read_raw+0x367/0x510 [thunderbolt]
tb_cfg_read+0xec/0x240 [thunderbolt]
tb_port_get_link_generation+0x258/0x420 [thunderbolt]
thunderbolt: Hold a router reference for each allocated HopID
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Hold a router reference for each allocated HopID
tb_stop() drops the reference to all DP tunnels but does not deactivate
them, thus nothing cancels a dprx_work still in flight (which holds its
own tunnel reference) and the tunnel can outlive tb_switch_remove(). The
HopID releases in tb_path_free() then operate on freed IDAs and trigger
warnings like
ida_free called for id=8 which is not allocated.
This can be triggered by unbinding the driver while a DP tunnel is still
waiting for the DPRX capabilities read to finish. On the Apple NHI
unplugging the cable r
thunderbolt: Make the DP tunnel activation callback mandatory
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Make the DP tunnel activation callback mandatory
tb_tunnel_alloc_dp() takes an optional callback which is run from
dprx_work once the DPRX capabilities read has completed. Without that
callback tb_dp_dprx_start() reads the capabilities synchronously and
never queues the work. It however always takes a tunnel reference which
is only dropped by dprx_work itself or by tb_dp_dprx_stop() when
cancel_delayed_work() actually canceled that work. That reference is
thus leaked for every tunnel without a callback.
The only tunnels without one are those from tb_tunnel_dis
Media · CVSS 5.4EPSS 0,17%Sin corrección publicada
thunderbolt: Tear down inactive DP tunnels when the domain is stopped
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Tear down inactive DP tunnels when the domain is stopped
tb_stop() only tears down DMA tunnels so a DP tunnel that is still
waiting for dprx_work to complete keeps that work queued while the
routers are removed and the control channel is stopped. The work only
stops once the DPRX timeout has passed and because it requeues itself
until then the flush_workqueue() in tb_domain_remove() won't wait for its
final run. The callback then runs against a domain that is already torn
down. A reference to that domain is kept so the completion waiting for
that domain to disa
Media · CVSS 4.1EPSS 0,17%Sin corrección publicada
thunderbolt: Fix domain reference leak when DPRX read is canceled
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix domain reference leak when DPRX read is canceled
tb_tunnel_one_dp() takes a domain reference which is only dropped once
tb_dp_tunnel_active() has run on the work queue. If that work is
cancelled that reference is leaked. Since
commit f5cc545f5969 ("thunderbolt: Wait for tb_domain_release() to
complete when driver is removed") instead of just leaking memory this
now also blocks in the completion wait forever when unbinding the
driver.
This can be triggered whenever a DP tunnel is torn down before the DPRX
read has completed, e.g. by unplugging within the ti
thunderbolt: Don't access a DP tunnel after its DPRX read was canceled
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Don't access a DP tunnel after its DPRX read was canceled
tb_dp_dprx_work() checks ->dprx_canceled before it takes tb->lock so it
misses a tb_dp_dprx_stop() that could not cancel the already running
work. It then polls the DPRX capabilities and runs the callback for a
tunnel that has already been torn down while the domain is suspending or
going away.
This can be hit by cancelling the DPRX read from outside the ordered
tb->wq: During suspend tb_disconnect_and_release_dp() does just this and
with a later patch tb_stop() will do it as well. The latter in combina
thunderbolt: Fix NULL dereference in tb_remove_work()
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix NULL dereference in tb_remove_work()
There is a slight race between tb_remove_work() and tb_domain_remove()
which leads to dereferencing a NULL tb->root_switch pointer inside
tb_free_unplugged_xdomains():
Thread A Thread B
tb_remove_work()
tb_domain_remove()
mutex_lock(&tb->lock)
tb_stop()
/* doesn't cancel a running callback */
c
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Reject oversized XDomain properties responses
tb_xdp_properties_request() allocates room for 45 data dwords in its
252-byte response buffer. The XDomain length field is six bits wide,
however, and a malicious peer can set it to 63. After the fixed response
fields are subtracted, the driver treats this as 48 data dwords.
Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to
allocation size") only bounds the copy against data_len. If data_len is
at least 48, memcpy() reads 192 bytes from the 180-byte res->data array,
causing a 12-byte heap ou
Media · CVSS 4.8EPSS 0,17%Sin corrección publicada
smb: client: discard post-EOF pagecache when extending a file via zero range
In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via zero range
smb3_zero_range() removed the pagecache only for the range being zeroed,
so when it extends the file the folio straddling the old EOF - which may
hold data dirtied past EOF through an mmap - was never dropped and became
visible as file content once the file was extended.
Lower the discard boundary to the smaller of the zero-range offset and the
old EOF.
Media · CVSS 4.8EPSS 0,19%Sin corrección publicada
smb: client: discard post-EOF pagecache when extending a file via clone range
In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via clone range
cifs_remap_file_range() discarded the pagecache only for the folios
overlapping the destination region, so when a clone extends the file the
folio straddling the old EOF - which may hold data dirtied past EOF
through an mmap - was never dropped and became visible as file content
once the file was extended.
Start the discard at the smaller of fstart and the old EOF. i_size is
still old here, so nothing past the old EOF is flushed to the server.
smb: client: flush and commit data before querying allocated ranges
In the Linux kernel, the following vulnerability has been resolved:
smb: client: flush and commit data before querying allocated ranges
The mode 0 / FALLOC_FL_KEEP_SIZE fallocate emulation for small interior
ranges in smb3_simple_fallocate_range() issues
FSCTL_QUERY_ALLOCATED_RANGES and zero-fills any sub-range the server
reports as an unallocated hole, to force block allocation without
changing file contents.
This is unsafe against Windows servers. Per the Win32 documentation,
FSCTL_QUERY_ALLOCATED_RANGES only reports ranges that *may* contain
nonzero data and is explicitly not coherent with recently written data:
"a call to FSCTL_QUE
smb: client: flush dirty data before zeroing a range
In the Linux kernel, the following vulnerability has been resolved:
smb: client: flush dirty data before zeroing a range
smb3_zero_range() emulates FALLOC_FL_ZERO_RANGE by invalidating the
page cache over the target range with truncate_pagecache_range() and
then issuing FSCTL_SET_ZERO_DATA to the server.
Dirty data was only flushed conditionally, when the range reached or
extended EOF. For a purely interior zero range that does not reach
EOF, no flush happened, so a dirty folio overlapping the range could
be written back to the server after the FSCTL and refill the range
that was just zeroed with stale data.
Fix this by unconditionally f
smb: client: drain and invalidate before server-side copy/clone
In the Linux kernel, the following vulnerability has been resolved:
smb: client: drain and invalidate before server-side copy/clone
cifs_file_copychunk_range() and the clone (FICLONE) path of
cifs_remap_file_range() do not serialise the destination page cache
against the server-side copy the way the other server-side range
operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range()
and smb3_insert_range()) do.
cifs_file_copychunk_range() invalidates the destination range with
filemap_invalidate_inode(), which takes and drops the mapping's
invalidate_lock internally, so the lock is no longer held when the
copychunk ioctl is issu
Media · CVSS 5.8EPSS 0,18%Sin corrección publicada
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
The invalidHandle, swapfile, oplock_break_cancelled, offload,
and status_file_deleted fields are stored in the same bitfield byte
in struct cifsFileInfo, but are updated in different code paths that
may run simultaneously, and are protected by different locks. Since
bitfield assignments generate byte-level read-modify-write operations,
a modification to one flag can overwrite a concurrent modification to
another flag.
To avoid these races, convert these flags from a bitfield to
separate bool fields.
iio: accel: kionix-kx022a: Prevent memory leak and fix state
In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kionix-kx022a: Prevent memory leak and fix state
The driver allocates memory for samples at buffer enable path. If regmap
operation fails in the kx022a_fifo_enable() at the buffer enable path, the
allocated memory is never freed. Furthermore, the state information and
previous hardware configuration(s) aren't undone, potentially leaving
WMI interrupts and buffers enabled, or driver state flags wrong.
Free the memory and revert the hardware configuration and state flags on
error path.
In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxcjk-1013: reject duplicate event disable
The IIO core does not filter duplicate writes to the event enable
attribute. kxcjk1013_write_event_config() already ignores repeated
enable requests, but a repeated disable request still calls
kxcjk1013_set_power_state(data, false), dropping a runtime PM reference
that was not acquired for this request. This can underflow the runtime
PM usage count and trigger a "Runtime PM usage count underflow" warning.
Return early when the requested state already matches ev_enable_state.