p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-gcp-6.8 · Página 181

Vulnerabilidades publicadas para linux-gcp-6.8 en los últimos 30 días: 797. Incluidas en el catálogo KEV: 0.

RSS ↗ JSON ↗
Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 9849

  1. CVE-2026-64437

    Alta · CVSS 8.8EPSS 0,43%Sin corrección publicada

    ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL") made smb2_cancel() skip a work whose state is KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same freeing producer path is reached for CLOSED too: SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock() worker. The

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  2. CVE-2026-64436

    Alta · CVSS 7.1EPSS 0,13%Sin corrección publicada

    net: af_key: initialize alg_key_len for IPComp states

    In the Linux kernel, the following vulnerability has been resolved: net: af_key: initialize alg_key_len for IPComp states pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  3. CVE-2026-64435

    Alta · CVSS 8.2EPSS 0,33%Sin corrección publicada

    audit: Fix data races of skb_queue_len() readers on audit_queue

    In the Linux kernel, the following vulnerability has been resolved: audit: Fix data races of skb_queue_len() readers on audit_queue Multiple readers access audit_queue.qlen via skb_queue_len() without holding the queue lock or using READ_ONCE(), while kauditd writes to this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE() protected by a spinlock. This constitutes data races. All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_w

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  4. CVE-2026-64434

    Alta · CVSS 8.8EPSS 0,26%Sin corrección publicada

    Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If the connection is torn down while the timer is running or pending, chan->conn can be freed, leading to a use-after-free when the timer worker attempts to lock conn->lock: | BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | BUG: KASAN: slab-use-after-free in __m

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  5. CVE-2026-64433

    Alta · CVSS 7.8EPSS 0,12%Sin corrección publicada

    Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete add_device_complete() runs from the hci_cmd_sync_work kworker, which holds only hci_req_sync_lock and *not* hci_dev_lock. It calls hci_conn_params_lookup() and then dereferences the returned object (params->flags) without taking hci_dev_lock: params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr, le_addr_type(cp->addr.type)); ... device_flags_changed(NULL, hdev, &cp->addr.bdaddr, cp->addr.type, hdev->conn_flags, params ? params->flags : 0); hci_conn_params_lookup() walks hdev->le_

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  6. CVE-2026-64432

    Alta · CVSS 7.8EPSS 0,14%Sin corrección publicada

    fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcns

    In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcns In the analysis pass of $LogFile journal replay, log_replay() copies LCNs from each action log record into an existing Dirty Page Table (DPT) entry without bounding the destination index. A crafted NTFS image with DPT entry lcns_follow=1 and an action log record with lcns_follow=2 produces a kernel slab out-of-bounds write at mount time: BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60 Write of size 8 at addr ffff8880095e1040 by task mount Two attacker-controlled fields can drive j+i past t

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  7. CVE-2026-64430

    Alta · CVSS 7.5EPSS 0,49%Sin corrección publicada

    NTB: epf: Avoid calling pci_irq_vector() from hardirq context

    In the Linux kernel, the following vulnerability has been resolved: NTB: epf: Avoid calling pci_irq_vector() from hardirq context ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive the vector number. pci_irq_vector() calls msi_get_virq() that takes a mutex and can therefore trigger "scheduling while atomic" splats: BUG: scheduling while atomic: kworker/u33:0/55/0x00010001 ... Call trace: ... schedule+0x38/0x110 schedule_preempt_disabled+0x28/0x50 __mutex_lock.constprop.0+0x848/0x908 __mutex_lock_slowpath+0x18/0x30 mutex_lock+0x4c/0x60 msi_domain_get_virq+0xe8/0x138 pci_irq_vector+0x2c/0x60

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  8. CVE-2026-64429

    Media · CVSS 5.5EPSS 0,1%Sin corrección publicada

    gpio: eic-sprd: use raw_spinlock_t in the irq startup path

    In the Linux kernel, the following vulnerability has been resolved: gpio: eic-sprd: use raw_spinlock_t in the irq startup path sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller state through sprd_eic_update(), which takes sprd_eic->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() ->

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  9. CVE-2026-64428

    Media · CVSS 5.5EPSS 0,12%Sin corrección publicada

    gpio: sch: use raw_spinlock_t in the irq startup path

    In the Linux kernel, the following vulnerability has been resolved: gpio: sch: use raw_spinlock_t in the irq startup path sch_irq_unmask() enables the GPIO IRQ and then updates the controller state through sch_irq_mask_unmask(), which takes sch->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sch_ir

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  10. CVE-2026-64425

    Media · CVSS 5.5EPSS 0,13%Sin corrección publicada

    io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item

    In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop") fixed the obvious case where io_worker_handle_work() took one exit-bit snapshot before draining pending work, but the fix stops one level too early. io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work run loop, yet it still snapshots that bit once before processing a whole dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT after the first linked item has started, the remaining linked items

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  11. CVE-2026-64424

    Alta · CVSS 7.8EPSS 0,12%Sin corrección publicada

    netpoll: fix a use-after-free on shutdown path

    In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  12. CVE-2026-64423

    Alta · CVSS 7.8EPSS 0,13%Sin corrección publicada

    ipv4: igmp: remove multicast group from hash table on device destruction

    In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: remove multicast group from hash table on device destruction When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and free

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  13. CVE-2026-64422

    Alta · CVSS 7.1EPSS 0,14%Sin corrección publicada

    net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes

    In the Linux kernel, the following vulnerability has been resolved: net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP socket state. The sysctl is stored as an `int` but copied into the `u32` `tp->reordering` field for new sockets, so negative writes wrap to large values. With `tcp_mtu_probing=2`, the wrapped value can overflow the `tcp_mtu_probe()` size calculation and drive the MTU probing path into an out-of-bounds read. Route `tcp_reordering` writes through `proc_dointvec_minmax()` and require it to be at least 1. Also require `tcp_max_reordering` to b

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  14. CVE-2026-64421

    Alta · CVSS 7.8EPSS 0,12%Sin corrección publicada

    media: nxp: imx8-isi: Fix use-after-free on remove

    In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix use-after-free on remove KASAN reports a slab-use-after-free in __media_entity_remove_link() during rmmod of imx8_isi: BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650 Read of size 2 at addr ffff0000d47cb02a by task rmmod/724 Call trace: __media_entity_remove_link+0x608/0x650 __media_entity_remove_links+0x78/0x144 __media_device_unregister_entity+0x150/0x280 media_device_unregister_entity+0x48/0x68 v4l2_device_unregister_subdev+0x158/0x300 v4l2_async_unbind_subdev_one+0x22c/0x358 v4l2_async_nf_u

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  15. CVE-2026-64420

    Alta · CVSS 7EPSS 0,12%Sin corrección publicada

    mfd: cros_ec: Delay dev_set_drvdata() until probe success

    In the Linux kernel, the following vulnerability has been resolved: mfd: cros_ec: Delay dev_set_drvdata() until probe success If ec_device_probe() fails, cros_ec_class_release releases memory for the cros_ec_dev structure. However, because the drvdata was already set, sub-drivers like cros_ec_typec can still retrieve the stale pointer via the platform device. This leads to a use-after-free when cros_ec_typec attempts to access &typec->ec->ec->dev on a device that has already been released. Move dev_set_drvdata() to ensure that the pointer is only made available once all initialization steps have succeeded. sysfs: cannot create duplicate f

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  16. CVE-2026-64419

    Media · CVSS 5.5EPSS 0,12%Sin corrección publicada

    mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()

    In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show() Reading the debugfs "count" file of a memcg-aware shrinker can sleep inside an RCU read-side critical section: BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421 RCU nest depth: 1, expected: 0 css_rstat_flush mem_cgroup_flush_stats zswap_shrinker_count shrinker_debugfs_count_show shrinker_debugfs_count_show() invokes the ->count_objects() callback under rcu_read_lock(). The zswap callback flushes memcg stats via css_rstat_flush(), which may sleep, so it must no

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  17. CVE-2026-64418

    Alta · CVSS 7.8EPSS 0,1%Sin corrección publicada

    mm: shrinker: fix shrinker_info teardown race with expansion

    In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix shrinker_info teardown race with expansion expand_shrinker_info() iterates all visible memcgs under shrinker_mutex, including memcgs that have not finished ->css_online() yet. Once pn->shrinker_info has been published, teardown must stay serialized with expand_shrinker_info() until that memcg is either fully online or no longer visible to iteration. Today alloc_shrinker_info() breaks that rule by dropping shrinker_mutex before freeing a partially initialized shrinker_info array, which may cause the following race: CPU0 CPU1 ====

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  18. CVE-2026-64417

    Media · CVSS 5.5EPSS 0,12%Sin corrección publicada

    mm: shrinker: fix NULL pointer dereference in debugfs

    In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix NULL pointer dereference in debugfs shrinker_debugfs_add() creates both "count" and "scan" debugfs files unconditionally. That assumes every shrinker implements both count_objects() and scan_objects(), which is not guaranteed. For example, the xen-backend shrinker sets count_objects() but leaves scan_objects() NULL, so writing to its scan file calls through a NULL function pointer and panics the kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. Call Trace: <T

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  19. CVE-2026-64413

    Alta · CVSS 7EPSS 0,13%Sin corrección publicada

    netfilter: ebtables: zero chainstack array

    In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: zero chainstack array sashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1]. Not a real-world bug, such allocation isn't expected to fail in the first place.

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  20. CVE-2026-64412

    Alta · CVSS 7.1EPSS 0,13%Sin corrección publicada

    netfilter: ebtables: module names must be null-terminated

    In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: module names must be null-terminated We need to explicitly check the length, else we may pass non-null terminated string to request_module().

    linux-gcp-6.8Sistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →