Vulnerabilidades de linux-gke · Página 104

scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the target-supplied data segment. The segment carries a 2-byte sense length followed by the sense bytes, so it must hold 2 + senselen bytes, but the bounds check only requires datalen >= senselen: senselen = get_unaligned_be16(data); if (datalen < senselen) goto invalid_datalen; memcpy(sc->sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); A target that returns a SCSI Response whose datalen equals senselen

• Actualiza a 5.15.0-1113.119

scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer iscsi_tcp_hdr_dissect() receives the data segment of several PDU types into the fixed-size conn->data buffer, which is allocated for ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP, REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU whose DataSegmentLength exceeds that buffer. The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its data segment (sense/response data) into conn->data via iscsi_tcp_data_recv_prep(), but it does so without the s

• Actualiza a 5.15.0-1113.119

hwmon: (nct6775-core) Fix number of temperature registers for NCT6116

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three

net: do not send ICMP/NDISC Redirects when peer allocation fails

In the Linux kernel, the following vulnerability has been resolved: net: do not send ICMP/NDISC Redirects when peer allocation fails When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry under memory pressure or tree size caps, redirect handlers previously fell back to sending un-rate-limited ICMP/NDISC Redirect messages. In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL. In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into inet_peer_xrlim_allow(), which returned true when peer == NULL. Because ICMP/NDISC Redirects are not part of the default global rate limit mask (sysct

hwmon: (nct6775-core) Prevent access to unsupported weight registers

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Prevent access to unsupported weight registers Sashiko reports: During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements. In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read eleme

• Actualiza a 5.15.0-1113.119

forcedeth: fix UAF of txrx_stats in nv_remove

In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev().

• Actualiza a 5.15.0-1113.119

hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower

• Actualiza a 5.15.0-1113.119

hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once.

• Actualiza a 5.15.0-1113.119

net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exp

net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister()

In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tun

Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp l2cap_le_connect_rsp() obtains a channel via __l2cap_get_chan_by_ident() but neither holds a reference nor uses l2cap_chan_hold_unless_zero() before locking and operating on it. A concurrent l2cap_chan_del() triggered by a remote disconnect can free the channel between the lookup and l2cap_chan_lock(), causing a use-after-free. The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero() to safely hold a reference, but l2cap_le_connect_rsp() was left unp

• Actualiza a 5.15.0-1113.119

Bluetooth: ISO: hold sk properly in iso_conn_ready

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: hold sk properly in iso_conn_ready sk deref in iso_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk is currently accessed without either: [Task 1] [Task 2] iso_sock_release iso_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) iso_sock_kill(sk) UAF on sk deref Fix possible UAF by holding sk refcoun

octeontx2-af: Block VFs from clobbering special CGX PKIND state

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND.

net: sxgbe: free TX rings on RX allocation failure

In the Linux kernel, the following vulnerability has been resolved: net: sxgbe: free TX rings on RX allocation failure When RX descriptor ring allocation fails, init_dma_desc_rings() only frees the partially allocated RX rings and returns. The TX rings that were allocated earlier in the same function are leaked. Rearrange error labels to clean up TX rings upon RX failures.

• Actualiza a 5.15.0-1113.119

qede: sync udp_tunnel ports outside qede_lock in the recovery path

In the Linux kernel, the following vulnerability has been resolved: qede: sync udp_tunnel ports outside qede_lock in the recovery path A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports configured wedges the rtnetlink control plane of the whole machine: NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms [qede_tx_timeout:586(ens6f1)]TX timeout on queue 2! [qede_recovery_handler:2665(ens6f0)]Starting a recovery process The recovery path deadlocks on the driver's own mutex: qede_sp_task rtnl_lock() mutex_lock(&edev->qede_lock) <- taken qede_recovery_handler qede_load udp_tunnel_nic

• Actualiza a 5.15.0-1113.119

ksmbd: fix use-after-free in __close_file_table_ids()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __close_file_table_ids() A ksmbd_file can remain alive after logical close while another session holds a temporary reference obtained through ksmbd_lookup_fd_inode(). ksmbd_close_fd() currently marks the file closed and drops the idr-owned reference, but leaves the pointer published in the closing session's idr until the final reference is dropped. If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final() supplies the foreign session's file table to __ksmbd_close_fd(). The object is then freed without being removed from its owne

ksmbd: use memcmp() to compare ClientGUIDs

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use memcmp() to compare ClientGUIDs ClientGUID is a fixed-size binary value and can contain embedded NUL bytes. strncmp() stops comparing at the first NUL byte, so different ClientGUID values can incorrectly be treated as equal. Use memcmp() in SMB3 multichannel session binding and FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE bytes.

pinctrl: devicetree: don't free uninitialized dev_name on error path

In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: don't free uninitialized dev_name on error path dt_remember_or_free_map() duplicates dev_name for each map entry. If kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps entries, including entries that have not been initialized. Some pinctrl drivers, including pinctrl-imx, allocate the map with kmalloc() and leave dev_name for the core to initialize. The untouched entries therefore contain uninitialized data which is passed to kfree_const(). Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection while binding the pinctr

• Actualiza a 5.15.0-1113.119

mm/hugetlb: fix list corruption in allocate_file_region_entries()

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix list corruption in allocate_file_region_entries() allocate_file_region_entries() tops up resv->region_cache with freshly allocated file_region descriptors. The allocation uses GFP_KERNEL, so resv->lock is dropped around it: the new entries are gathered on a stack-local list head, allocated_regions, and spliced into resv->region_cache once the lock is re-acquired. The splice used list_splice(), which moves the entries but does not re-initialize the source head, so allocated_regions is left pointing at an entry that now lives on resv->region_cache. The top-

• Actualiza a 5.15.0-1113.119

KVM: s390: pci: Reject adapter interrupt forwarding if already enabled

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Reject adapter interrupt forwarding if already enabled The MPCIFC instruction doesn't allow registering adapter interrupts without first unregistering. So reject any request to enable interrupt forwarding if its already enabled for the zPCI device. This also fixes overwriting and thus leaking resources when the ioctl is called multiple times for the same device.