Vulnerabilidades de linux-ibm · Página 136

drm/amdgpu/vce: fix integer overflow in image size

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: fix integer overflow in image size Fix a security vulnerability where malicious VCE command streams with oversized dimensions (e.g. 65536×65536) cause 32-bit integer overflow, wrapping the calculated buffer size to 0. This bypasses validation and allows GPU firmware to perform out-of-bound memory access. The fix uses 64-bit arithmetic to detect overflow and rejects invalid dimensions before they reach the hardware. V2: remove redundant check V3: modify max height value V4: remove size64 (cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d)

drm/amdgpu/vcn4: avoid rereading IB param length

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: avoid rereading IB param length Reuse the parameter length returned by vcn_v4_0_enc_find_ib_param() instead of rereading it from the IB. This avoids a potential TOCTOU issue if the IB contents change between reads. (cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a)

drm/amdgpu: fix division by zero with invalid uvd dimensions

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix division by zero with invalid uvd dimensions When width or height is less than 16, width_in_mb or height_in_mb becomes 0, leading to fs_in_mb being 0. This causes a division by zero when calculating num_dpb_buffer in H264 and H264 Perf decode paths. Add validation to reject frames with width < 16 or height < 16 before performing any calculations that depend on these values. V2: Format change - move up all vaiable definitions. V3: Use warn_once to avoid spam. (cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb)

• Actualiza a 5.15.0-1111.115

drm/amdgpu: Fix kernel panic during driver load failure

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix kernel panic during driver load failure Avoid kernel panic if MES init fails during driver load. The KIQ ring is falsely marked as ready as ASICs that use MES, KIQ is owned by MES. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu] Call Trace: gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu] amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu] amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu] amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu] amdgpu_gart_unbind+0x72/0x90 [amdgpu] amdgpu

drm/amdgpu: invoke pm_genpd_remove() before freeing genpd

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: invoke pm_genpd_remove() before freeing genpd Call pm_genpd_remove() to unregister from global list prior to releasing acp_genpd memory, and clear the pointer after free. (cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2)

• Actualiza a 5.15.0-1111.115

drm/amdgpu: reject mapping a reserved doorbell to a new queue

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject mapping a reserved doorbell to a new queue When creating an user-queue, the user space provides a doorbell BO handle and an offset within the bo to obtain a doorbell. However current implementation using xa_store_irq() to store a doorbell, which allows a later queue created with the same BO and offset parameters to overwrite an existing queue and doorbell mapping. This can cause problems like misrouting fence IRQ processing to a wrong queue, and mislead the cleanup process of one queue erasing the mapping of another queue. This commit fixes this issue

drm/amdgpu: fix aperture mapping leak

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix aperture mapping leak amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to always return false, so iounmap(aper_base_kaddr) never runs on normal driver unload, leaving an orphaned entry in the x86 PAT interval tree. On connected_to_cpu hardware, the aperture is mapped write-back (WB) via ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC) over the same range. The WC vs WB conflict causes: ioremap error for 0x..., requested 0x1, got 0x0 amdgpu: disc

ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl set_ntacl_dacl() copies each ACE from the attacker-controlled stored security descriptor verbatim into the response DACL without checking sid.num_subauth. The ACE bytes (including an unchecked num_subauth) originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE with `break` rather than an error, so parse_sec_desc() still returns success and the malformed SD reaches the xattr intact. On a subsequent SMB2_QUERY_INFO(SecInfo=DACL)

ksmbd: bound DACL dedup walk to copied ACEs

In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound DACL dedup walk to copied ACEs set_ntacl_dacl() can stop copying ACEs before consuming the full input DACL when size accounting overflows. When that happens, num_aces reflects only the ACEs that were actually copied into the output DACL, but set_posix_acl_entries_dacl() still receives nt_num_aces and uses it to walk the existing ACE array during dedup. That makes the dedup walk scan past the copied ACE array and inspect buffer tail that does not contain valid ACEs. Split the two meanings currently carried by the NT ACE count. Pass the number of copied NT ACE

ksmbd: validate ACE size against SID sub-authorities

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ACE size against SID sub-authorities set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but does not verify that the declared ACE size contains all sub-authorities described by that field. An undersized ACE can therefore be copied and later make the POSIX ACL deduplication walk inspect data beyond the copied ACE boundary. The existing initial bound check is also too small. It only ensures that the ACE size field is accessible before set_ntacl_dacl() reads sid.num_subauth farther into the input buffer. Require enough input for the fixed SID h

audit: fix recursive locking deadlock in audit_dupe_exe()

In the Linux kernel, the following vulnerability has been resolved: audit: fix recursive locking deadlock in audit_dupe_exe() A deadlock occurs in the audit subsystem when duplicating executable-related rules. When a file is moved (e.g., via do_renameat2()), the VFS layer locks the parent directory (I_MUTEX_PARENT), which synchronously triggers an fsnotify_move event. If an existing executable audit rule matches the file being moved, the audit subsystem catches this event and calls audit_dupe_exe() to duplicate the watch and update the rule. Then, audit_alloc_mark() would call kern_path_parent() to resolve the path, leading to a blind atte

• Actualiza a 5.15.0-1113.117

KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug If a vCPU stays scheduled out (or blocked) while the last pCPU it ran on goes through a hotplug cycle (online->offline->online), and the vCPU then resumes execution on the same pCPU, then it is possible for it to run with an ASID that has now been assigned to a different vCPU, resulting in stale TLB translations being used. svm_enable_virtualization_cpu() resets asid_generation to 1 and sets next_asid to max_asid + 1 on every CPU online event, including hotplug cycles. Because next_asid sta

HID: wacom: stop hardware after post-start probe failures

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

• Actualiza a 5.15.0-1111.115

debugobjects: Plug race against a concurrent OOM disable

In the Linux kernel, the following vulnerability has been resolved: debugobjects: Plug race against a concurrent OOM disable syzbot reported a puzzling splat: WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20 stub_timer() is installed as timer callback function in hrtimer_fixup_assert_init(), which is invoked when debug_object_assert_init() can't find a shadow object. In that case debug objects emits a warning about it before invoking the fixup. Though the provided console log lacks this warning and instead has the following a few seconds before the splat: ODEBUG: Out of memory. ODEBUG disabled So the object was looked

• Actualiza a 5.15.0-1111.115

usb: gadget: function: rndis: add length check to response query

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: function: rndis: add length check to response query Add variable representations for BufLength and BufOffset in rndis_query_response(), and perform a length check on them. This is identical to how rndis_set_response() handles these parameters.

• Actualiza a 5.15.0-1111.115

mm/khugepaged: write all dirty file folios when collapsing

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: write all dirty file folios when collapsing [There is no upstream commit, as this code was removed by upstream commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")] As-is, khugepaged and writable-file opening exclude each other. A file cannot be open writeable and have THPs (because the filesystem is not aware of them). khugepaged will never collapse file pages for files that are opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that particular file is dropped. This is fine because nothing could've been dirtied

Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bit in tx_state means write_work is pending and blocks queueing it again. Currently this bit is not cleared when canceling the work in hci_uart_close(), which blocks future writes when device is reopened later if write_work was pending. Fix by clearing HCI_UART_SENDING when canceling the work. Also make clearing of tx_skb safe by using disable_work_sync + enable_work instead of just cancel_work_sync. hci_uart_flush() purges the proto tx queue so we can cancel the pending write_work

staging: vme_user: fix location monitor leak in tsi148 bridge

In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: fix location monitor leak in tsi148 bridge tsi148_probe() allocates a location monitor resource and links it into tsi148_bridge->lm_resources. The probe error path frees this list, but tsi148_remove() only frees the dma, slave and master resource lists, so the location monitor resource is leaked on device unbind or module unload. Free the lm_resources list in tsi148_remove() as well, before tsi148_bridge is freed.

ksmbd: fix path resolution in ksmbd_vfs_kern_path_create

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix path resolution in ksmbd_vfs_kern_path_create The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an absolute path with convert_to_unix_name() and resolves it from AT_FDCWD via start_creating_path(), so a ".." component is walked from the real filesystem root and escapes the export. An authenticated client races a missing path component so the rooted open lookup returns -ENOENT (taking the create branch) while the same component is present (a directory) when the create wa

libceph: fix two unsafe bare decodes in decode_lockers()

In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes pas

• Actualiza a 5.15.0-1113.117