Vulnerabilidades de linux-ibm · Página 165

dm cache metadata: fix memory leak on metadata abort retry

In the Linux kernel, the following vulnerability has been resolved: dm cache metadata: fix memory leak on metadata abort retry When failing to acquire the root_lock in dm_cache_metadata_abort because the block_manager is read-only, the temporary block_manager created outside the root_lock is not properly released, causing a memory leak. Reproduce steps: This can be reproduced by reloading a new table while the metadata is read-only. While the second call to dm_cache_metadata_abort is caused by lack of support for table preload in dm-cache, mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active

• Actualiza a 5.15.0-1106.110

dm log: fix out-of-bounds write due to region_count overflow

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_tes

• Actualiza a 5.15.0-1106.110

drm/msm/dpu: fix mismatch between power and frequency

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: fix mismatch between power and frequency During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops the MMCX rail to MIN_SVS while the core clock frequency remains at its original (highest) rate. When runtime resume re-enables the clock, this may result in a mismatch between the rail voltage and the clock rate. For example, in the DPU bind path, the sequence could be: cpu0: dev_sync_state -> rpmhpd_sync_state cpu1: dpu_kms_hw_init timeline 0 ------------------------------------------------> t After rpmhpd_syn

iommu/amd: Fix clone_alias() to use the original device's devid

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix clone_alias() to use the original device's devid Currently clone_alias() assumes first argument (pdev) is always the original device pointer. This function is called by pci_for_each_dma_alias() which based on topology decides to send original or alias device details in first argument. This meant that the source devid used to look up and copy the DTE may be incorrect, leading to wrong or stale DTE entries being propagated to alias device. Fix this by passing the original pdev as the opaque data argument to both the direct clone_alias() call and pci_for_each_

quota: Fix race of dquot_scan_active() with quota deactivation

In the Linux kernel, the following vulnerability has been resolved: quota: Fix race of dquot_scan_active() with quota deactivation dquot_scan_active() can race with quota deactivation in quota_release_workfn() like: CPU0 (quota_release_workfn) CPU1 (dquot_scan_active) ============================== ============================== spin_lock(&dq_list_lock); list_replace_init( &releasing_dquots, &rls_head); /* dquot X on rls_head, dq_count == 0, DQ_ACTIVE_B still set */ spin_unlock(&dq_list_lock); synchronize_srcu(&dquot_srcu); spin_lock(&dq_list_lock);

• Actualiza a 5.15.0-1106.110

gfs2: add some missing log locking

In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush().

• Actualiza a 5.15.0-1106.110

gfs2: prevent NULL pointer dereference during unmount

In the Linux kernel, the following vulnerability has been resolved: gfs2: prevent NULL pointer dereference during unmount When flushing out outstanding glock work during an unmount, gfs2_log_flush() can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that.

• Actualiza a 5.15.0-1106.110

efi/capsule-loader: fix incorrect sizeof in phys array reallocation

In the Linux kernel, the following vulnerability has been resolved: efi/capsule-loader: fix incorrect sizeof in phys array reallocation The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be causing an undersized allocation. The allocation is also inconsistent with the initial array allocation in efi_capsule_open() that allocates one entry with sizeof(phys_addr_t), and the efi_capsule_write() function that stores phys_addr_t values (not pointers) via page_to_phys(). On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this goes unnotic

• Actualiza a 5.15.0-1106.110

ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine ksmbd_crypt_message() sets a NULL completion callback on AEAD requests and does not handle the -EINPROGRESS return code from async hardware crypto engines like the Qualcomm Crypto Engine (QCE). When QCE returns -EINPROGRESS, ksmbd treats it as an error and immediately frees the request while the hardware DMA operation is still in flight. The DMA completion callback then dereferences freed memory, causing a NULL pointer crash: pc : qce_skcipher_done+0x24/0x174 lr : vchan_complete+0x230/0x27c ... e

• Actualiza a 5.15.0-1106.110

memory: tegra124-emc: Fix dll_change check

In the Linux kernel, the following vulnerability has been resolved: memory: tegra124-emc: Fix dll_change check The code checking whether the specified memory timing enables DLL in the EMRS register was reversed. DLL is enabled if bit A0 is low. Fix the check.

• Actualiza a 5.15.0-1106.110

ocfs2/dlm: validate qr_numregions in dlm_match_regions()

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: validate qr_numregions in dlm_match_regions() Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()". In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION network message is used to drive loops over the qr_regions buffer without sufficient validation. This series fixes two issues: - Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-

• Actualiza a 5.15.0-1106.110

ocfs2: fix listxattr handling when the buffer is full

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix listxattr handling when the buffer is full [BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly. kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_obj

• Actualiza a 5.15.0-1106.110

ocfs2: validate bg_bits during freefrag scan

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate bg_bits during freefrag scan [BUG] A crafted filesystem can trigger an out-of-bounds bitmap walk when OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT. BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] BUG: KASAN: use-after-free

• Actualiza a 5.15.0-1106.110

ocfs2: validate group add input before caching

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate group add input before caching [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x1

• Actualiza a 5.15.0-1106.110

HID: usbhid: fix deadlock in hid_post_reset()

In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them.

• Actualiza a 5.15.0-1106.110

bpf, arm64: Fix off-by-one in check_imm signed range check

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for c

bpf, sockmap: Fix af_unix iter deadlock

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix iter deadlock bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast path and the iter prog attempts to update a sockmap. Which ends up spinning at sock_map_update_elem()'s bh_lock_sock(): WARNING: possible recursive locking detected test_progs/1393 is trying to acquire lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0 but task is already holding lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 other info that might help us debug this: Possible unsafe lo

bpf, sockmap: Fix af_unix null-ptr-deref in proto update

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix null-ptr-deref in proto update unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`). sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that socket is properly set up, which would include having a defined peer. IOW, there's a window when unix_stream_bpf_update_proto() can be called on socket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------

bpf, sockmap: Take state lock for af_unix iter

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(s

greybus: raw: fix use-after-free on cdev close

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free on cdev close This addresses a use-after-free bug when a raw bundle is disconnected but its chardev is still opened by an application. When the application releases the cdev, it causes the following panic when init on free is enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: <TASK> cdev_put+0x18/0x30 __fput+0x255/0x2a0 __x64_sys_close+0x3d/0x80