Vulnerabilidades de linux-nvidia-tegra-igx · Página 158

nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty() nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks by comparing it with the current block number bd_blocknr. If they differ, the block is considered dead and skipped. However, bd_oblocknr should never be 0 since block 0 typically stores the primary superblock and is never a valid GC target block. A corrupted ioctl request with bd_oblocknr set to 0 causes the comparison to incorrectly match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing the dead block check and callin

• Actualiza a 5.15.0-1053.53

wifi: mt76: mt7921: Place upper limit on station AID

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Place upper limit on station AID Any station configured with an AID over 20 causes a firmware crash. This situation occurred in our testing using an AP interface on 7922 hardware, with a modified hostapd, sourced from Mediatek's OpenWRT feeds. In stock hostapd, station AIDs begin counting at 1, and this configuration is prevented with an upper limit on associated stations. However, the modified hostapd began allocation at 65, which caused the firmware to crash. This fix does not allow these AIDs to work, but will prevent the firmware crash. This crash

padata: Put CPU offline callback in ONLINE section to allow failure

In the Linux kernel, the following vulnerability has been resolved: padata: Put CPU offline callback in ONLINE section to allow failure syzbot reported the following warning: DEAD callback error for CPU1 WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614 at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux") which tglx traced to padata_cpu_dead() given it's the only sub-CPUHP_TEARDOWN_CPU callback that returns an error. Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU so move the CPU offline callback to t

drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths In dc_dmub_srv_log_diagnostic_data() and dc_dmub_srv_enable_dpia_trace(). Both functions check: if (!dc_dmub_srv || !dc_dmub_srv->dmub) and then call DC_LOG_ERROR() inside that block. DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if dc_dmub_srv is NULL, the logging itself can dereference a NULL pointer and cause a crash. Fix this by splitting the checks. First check if dc_dmub_srv is NULL and return immediately. Then check dc_dmub_srv->dmub and log the error only when dc_dmub_srv is valid. Fix

ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison The local-vs-remote region comparison loop uses '<=' instead of '<', causing it to read one entry past the valid range of qr_regions. The other loops in the same function correctly use '<'. Fix the loop condition to use '<' for consistency and correctness.

• Actualiza a 5.15.0-1053.53

tty: hvc_iucv: fix off-by-one in number of supported devices

In the Linux kernel, the following vulnerability has been resolved: tty: hvc_iucv: fix off-by-one in number of supported devices MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8. This is the number of entries in: static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; Sometimes hvc_iucv_table[] is limited by: (a) if (num > hvc_iucv_devices) // for error detection or (b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places (so these 2 don't agree; second one appears to be correct to me.) hvc_iucv_devices can be 0..8. This is a counter. (c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) If hvc_iucv_devices == 8, (a) allows the

• Actualiza a 5.15.0-1053.53

scsi: sg: Resolve soft lockup issue when opening /dev/sgX

In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Resolve soft lockup issue when opening /dev/sgX The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds!

• Actualiza a 5.15.0-1053.53

f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show()

In the Linux kernel, the following vulnerability has been resolved: f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show() In f2fs_sbi_show(), the extension_list, extension_count and hot_ext_count are read without holding sbi->sb_lock. If a concurrent sysfs store modifies the extension list via f2fs_update_extension_list(), the show path may read inconsistent count and array contents, potentially leading to out-of-bounds access or displaying stale data. Fix this by holding sb_lock around the entire extension list read and format operation.

mailbox: mailbox-test: free channels on probe error

In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: free channels on probe error On probe error, free the previously obtained channels. This not only prevents a leak, but also UAF scenarios because the client structure will be removed nonetheless because it was allocated with devm.

• Actualiza a 5.15.0-1053.53

mailbox: add sanity check for channel array

In the Linux kernel, the following vulnerability has been resolved: mailbox: add sanity check for channel array Fail gracefully if there is no channel array attached to the mailbox controller. Otherwise the later dereference will cause an OOPS which might not be seen because mailbox controllers might instantiate very early. Remove the comment explaining the obvious while here.

• Actualiza a 5.15.0-1053.53

mailbox: mailbox-test: don't free the reused channel

In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: don't free the reused channel The RX channel can be aliased to the TX channel if it has a different MMIO. This special case needs to be handled when freeing the channels otherwise a double-free occurs.

• Actualiza a 5.15.0-1053.53

net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind

In the Linux kernel, the following vulnerability has been resolved: net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via pn_socket_autobind(): kernel BUG at net/phonet/socket.c:213! RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline] RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421 Call Trace: sock_sendmsg_nosec+0x112/0x150 net/socket.c:797 __sock_sendmsg net/socket.c:812 [inline] __sys_sendto+0x402/0x590 net/socket.c:2280 ... pn_socket_autobind() calls pn_socket_bind() with port 0 and, on -EINVAL, assumes the so

ALSA: hda/conexant: Fix missing error check for jack detection

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/conexant: Fix missing error check for jack detection In cx_probe(), the return value of snd_hda_jack_detect_enable_callback() is ignored. This function returns a pointer, and if it fails (e.g., due to memory allocation failure), it returns an error pointer which must be checked using IS_ERR(). If the registration fails, the driver continues to probe, but the jack detection callback will not be registered. This can lead to a kernel crash later when the driver attempts to handle jack events or accesses the uninitialized structure. Check the return value using IS_E

• Actualiza a 5.15.0-1053.53

ice: fix NULL pointer dereference in ice_reset_all_vfs()

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_reset_all_vfs() ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi(). When the VSI rebuild fails (e.g. during NVM firmware update via nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path, leaving txq_map and rxq_map as NULL. The subsequent unconditional call to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0]. The single-VF reset path in ice_reset_vf() already handles this correctly by checking the return value of ice_vf_reconfi

audit: fix incorrect inheritable capability in CAPSET records

In the Linux kernel, the following vulnerability has been resolved: audit: fix incorrect inheritable capability in CAPSET records __audit_log_capset() records the effective capability set into the inheritable field due to a copy-paste error. Every CAPSET audit record therefore reports cap_pi (process inheritable) with the value of cap_effective instead of cap_inheritable. This silently corrupts audit data used for compliance and forensic analysis: an attacker who modifies inheritable capabilities to prepare for a privilege-escalating exec would have the change masked in the audit trail. The bug has been present since the original introduc

• Actualiza a 5.15.0-1053.53

btrfs: only release the dirty pages io tree after successful writes

In the Linux kernel, the following vulnerability has been resolved: btrfs: only release the dirty pages io tree after successful writes [WARNING] With extra warning on dirty extent buffers at umount (aka, the next patch in the series), test case generic/388 can trigger the following warning about dirty extent buffers at unmount time: BTRFS critical (device dm-2 state E): emergency shutdown BTRFS error (device dm-2 state E): error while writing out transaction: -30 BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction. BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30) BTRFS: error (device

ipv6: mcast: Fix use-after-free when processing MLD queries

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix use-after-free when processing MLD queries When processing an MLD query, a pointer to the multicast group address is retrieved when initially parsing the packet. This pointer is later dereferenced without being reloaded despite the fact that the skb header might have been reallocated following the pskb_may_pull() calls, leading to a use-after-free [1]. Fix by copying the multicast group address when the packet is initially parsed. [1] BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512) Read of size 8 at addr ffff8881154b8e90 by tas

• Actualiza a 5.15.0-1059.59

tee: optee: prevent use-after-free when the client exits before the supplicant

In the Linux kernel, the following vulnerability has been resolved: tee: optee: prevent use-after-free when the client exits before the supplicant Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the client wait as killable so it can be interrupted during shutdown or after a supplicant crash. This changes the original lifetime expectations: the client task can now terminate while the supplicant is still processing its request. If the client exits first it removes the request from its queue and kfree()s it, while the request ID remains in supp->idr. A subsequent lookup on the supplicant path then dereferences freed memory,

• Actualiza a 5.15.0-1059.59

ipvs: clear the svc scheduler ptr early on edit

In the Linux kernel, the following vulnerability has been resolved: ipvs: clear the svc scheduler ptr early on edit ip_vs_edit_service() while unbinding the old scheduler clears the svc->scheduler ptr after the scheduler module initiates RCU callbacks. This can cause packets to use the old scheduler at the time when svc->sched_data is already freed after RCU grace period. Fix it by clearing the ptr early in ip_vs_unbind_scheduler(), before the done_service method schedules any RCU callbacks. Also, if the new scheduler fails to initialize when replacing the old scheduler, try to restore the old scheduler while still returning the error cod

• Actualiza a 5.15.0-1059.59

netfilter: synproxy: add mutex to guard hook reference counting

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: add mutex to guard hook reference counting As the synproxy infrastructure register netfilter hooks on-demand when a user adds the first iptables target or nftables expression, if done concurrently they can race each other. Introduce a mutex to serialize the refcount control blocks access from both frontends. While a per namespace mutex might be more efficient, it is not needed for target/expression like SYNPROXY.

• Actualiza a 5.15.0-1059.59