Vulnerabilidades de linux-nvidia-tegra-igx · Página 180

ipvs: do not keep dest_dst if dev is going down

In the Linux kernel, the following vulnerability has been resolved: ipvs: do not keep dest_dst if dev is going down There is race between the netdev notifier ip_vs_dst_event() and the code that caches dst with dev that is going down. As the FIB can be notified for the closed device after our handler finishes, it is possible valid route to be returned and cached resuling in a leaked dev reference until the dest is not removed. To prevent new dest_dst to be attached to dest just after the handler dropped the old one, add a netif_running() check to make sure the notifier handler is not currently running for device that is closing.

power: supply: sbs-battery: Fix use-after-free in power_supply_changed()

In the Linux kernel, the following vulnerability has been resolved: power: supply: sbs-battery: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handle

• Actualiza a 5.15.0-1053.53

fat: avoid parent link count underflow in rmdir

In the Linux kernel, the following vulnerability has been resolved: fat: avoid parent link count underflow in rmdir Corrupted FAT images can leave a directory inode with an incorrect i_nlink (e.g. 2 even though subdirectories exist). rmdir then unconditionally calls drop_nlink(dir) and can drive i_nlink to 0, triggering the WARN_ON in drop_nlink(). Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the parent link count when it is at least 3, otherwise report a filesystem error.

• Actualiza a 5.15.0-1053.53

ext4: don't cache extent during splitting extent

In the Linux kernel, the following vulnerability has been resolved: ext4: don't cache extent during splitting extent Caching extents during the splitting process is risky, as it may result in stale extents remaining in the status tree. Moreover, in most cases, the corresponding extent block entries are likely already cached before the split happens, making caching here not particularly useful. Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, when ext4_split_extent_at()

• Actualiza a 5.15.0-1053.53

usb: cdns3: fix role switching during resume

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipp

• Actualiza a 5.15.0-1053.53

xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path icmp_route_lookup() performs multiple route lookups to find a suitable route for sending ICMP error messages, with special handling for XFRM (IPsec) policies. The lookup sequence is: 1. First, lookup output route for ICMP reply (dst = original src) 2. Pass through xfrm_lookup() for policy check 3. If blocked (-EPERM) or dst is not local, enter "reverse path" 4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec which reverses the original packet's flow (saddr<->daddr swapped) 5. If fl4_dec.saddr

powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") restructured the EEH driver to improve synchronization with the PCI hotplug layer. However, it inadvertently moved pci_lock_rescan_remove() outside its intended scope in eeh_handle_normal_event(), leading to broken PCI error reporting and improper EEH event triggering. Specifically, eeh_handle_normal_event() acquired pci_lock_rescan_remove() before calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts t

• Actualiza a 5.15.0-1053.53

power: supply: bq256xx: Fix use-after-free in power_supply_changed()

In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler ha

• Actualiza a 5.15.0-1053.53

ext4: drop extent cache when splitting extent fails

In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache when splitting extent fails When the split extent fails, we might leave some extents still being processed and return an error directly, which will result in stale extent entries remaining in the extent status tree. So drop all of the remaining potentially stale extents if the splitting fails.

• Actualiza a 5.15.0-1053.53

iommu/vt-d: Clear Present bit before tearing down PASID entry

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down PASID entry The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64 bytes). When tearing down an entry, the current implementation zeros the entire 64-byte structure immediately using multiple 64-bit writes. Since the IOMMU hardware may fetch these 64 bytes using multiple internal transactions (e.g., four 128-bit bursts), updating or zeroing the entire entry while it is active (P=1) risks a "torn" read. If a hardware fetch occurs simultaneously with the CPU zeroing the entry, the hardware could observe an in

apparmor: Fix & Optimize table creation from possibly unaligned memory

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix & Optimize table creation from possibly unaligned memory Source blob may come from userspace and might be unaligned. Try to optize the copying process by avoiding unaligned memory accesses. - Added Fixes tag - Added "Fix &" to description as this doesn't just optimize but fixes a potential unaligned memory access [jj: remove duplicate word "convert" in comment trigger checkpatch warning]

net: hns3: fix double free issue for tx spare buffer

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix double free issue for tx spare buffer In hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structure is created for rollback. However, the tx_spare pointer in the original ring handle is incorrectly left pointing to the old backup memory. Later, if memory allocation fails in hns3_init_all_ring() during the setup, the error path attempts to free all newly allocated rings. Since tx_spare contains a stale (non-NULL) pointer from the backup, it is mistaken for a newly allocated buffer and is erroneously freed, leading to a double-free of the backup

• Actualiza a 5.15.0-1053.53

xen-netback: reject zero-queue configuration from guest

In the Linux kernel, the following vulnerability has been resolved: xen-netback: reject zero-queue configuration from guest A malicious or buggy Xen guest can write "0" to the xenbus key "multi-queue-num-queues". The connect() function in the backend only validates the upper bound (requested_num_queues > xenvif_max_queues) but not zero, allowing requested_num_queues=0 to reach vzalloc(array_size(0, sizeof(struct xenvif_queue))), which triggers WARN_ON_ONCE(!size) in __vmalloc_node_range(). On systems with panic_on_warn=1, this allows a guest-to-host denial of service. The Xen network interface specification requires the queue count to be

• Actualiza a 5.15.0-1053.53

power: supply: cpcap-battery: Fix use-after-free in power_supply_changed()

In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-battery: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ hand

• Actualiza a 5.15.0-1053.53

iio: sca3000: Fix a resource leak in sca3000_probe()

In the Linux kernel, the following vulnerability has been resolved: iio: sca3000: Fix a resource leak in sca3000_probe() spi->irq from request_threaded_irq() not released when iio_device_register() fails. Add an return value check and jump to a common error handler when iio_device_register() fails.

• Actualiza a 5.15.0-1053.53

power: supply: bq25980: Fix use-after-free in power_supply_changed()

In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25980: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler ha

• Actualiza a 5.15.0-1053.53

HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients During a warm reset flow, the cl->device pointer may be NULL if the reset occurs while clients are still being enumerated. Accessing cl->device->reference_count without a NULL check leads to a kernel panic. This issue was identified during multi-unit warm reboot stress clycles. Add a defensive NULL check for cl->device to ensure stability under such intensive testing conditions. KASAN: null-ptr-deref in range [0000000000000000-0000000000000007] Workqueue: ish_fw_update_wq fw_reset_work_fn Call Trace:

mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure

In the Linux kernel, the following vulnerability has been resolved: mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure The wm5102_clear_write_sequencer() helper may return an error and just return, bypassing the cleanup sequence and causing regulators to remain enabled, leading to a resource leak. Change the direct return to jump to the err_reset label to properly free the resources.

• Actualiza a 5.15.0-1053.53

netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets Userspace provides an optimized representation in case intervals are adjacent, where the end element is omitted. The existing partial overlap detection logic skips anonymous set checks on start elements for this reason. However, it is possible to add intervals that overlap to this anonymous where two start elements with the same, eg. A-B, A-C where C < B. start end A B start end A C Restore the check on overlapping start elements to report an overlap.

• Actualiza a 5.15.0-1053.53

scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix memory leak in pqi_report_phys_luns() pqi_report_phys_luns() fails to release the rpl_list buffer when encountering an unsupported data format or when the allocation for rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic, leading to memory leaks. Consolidate the error handling by adding an out_free_rpl_list label and use goto statements to ensure rpl_list is consistently freed on failure. Compile tested only. Issue found using a prototype static analysis tool and code review.