Vulnerabilidades de linux-raspi · Página 192

net: usb: pegasus: enable basic endpoint checking

In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: enable basic endpoint checking pegasus_probe() fills URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interrupts A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a pegasus_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls before any resource allocation

• Actualiza a 5.15.0-1106.109

xfs: remove xfs_attr_leaf_hasname

In the Linux kernel, the following vulnerability has been resolved: xfs: remove xfs_attr_leaf_hasname The calling convention of xfs_attr_leaf_hasname() is problematic, because it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a non-NULL buffer pointer for an already released buffer when xfs_attr3_leaf_lookup_int fails with other error values. Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so that the buffer release code is done by each caller of xfs_attr3_leaf_read.

HID: hid-pl: handle probe errors

In the Linux kernel, the following vulnerability has been resolved: HID: hid-pl: handle probe errors Errors in init must be reported back or we'll follow a NULL pointer the first time FF is used.

• Actualiza a 5.15.0-1106.109

net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()

In the Linux kernel, the following vulnerability has been resolved: net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean() The priv->rx_buffer and priv->tx_buffer are alloc'd together as contiguous buffers in uhdlc_init() but freed as two buffers in uhdlc_memclean(). Change the cleanup to only call dma_free_coherent() once on the whole buffer.

• Actualiza a 5.15.0-1106.109

powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()

In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: Add check for kcalloc() failure in parse_thread_groups() As kcalloc() may fail, check its return value to avoid a NULL pointer dereference when passing it to of_property_read_u32_array().

• Actualiza a 5.15.0-1106.109

Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"

In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV" This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"), which causes a deadlock by recursively taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of pci_stop_and_remove_bus_device(). For example with the following sequence of commands: $ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs $ echo 1 > /sys/bus/pci/devices/<pf>/remove A trimmed trace of the deadlock on a mlx5 device is as below: zsh/5715 is trying to acqu

• Actualiza a 5.15.0-1106.109

remoteproc: imx_rproc: Fix invalid loaded resource table detection

In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Fix invalid loaded resource table detection imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded resource table even when the current firmware does not provide one. When the device tree contains a "rsc-table" entry, priv->rsc_table is non-NULL and denotes where a resource table would be located if one is present in memory. However, when the current firmware has no resource table, rproc->table_ptr is NULL. The function still returns priv->rsc_table, and the remoteproc core interprets this as a valid loaded resource table. Fix this by

• Actualiza a 5.15.0-1106.109

mfd: core: Add locking around 'mfd_of_node_list'

In the Linux kernel, the following vulnerability has been resolved: mfd: core: Add locking around 'mfd_of_node_list' Manipulating a list in the kernel isn't safe without some sort of mutual exclusion. Add a mutex any time we access / modify 'mfd_of_node_list' to prevent possible crashes.

ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value.

• Actualiza a 5.15.0-1106.109

HID: magicmouse: Do not crash on missing msc->input

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: Do not crash on missing msc->input Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, msc->input stays NULL, leading to a crash at a later time. Detect this condition in the input_configured() hook and reject the device. This is not supposed to happen with actual magic mouse devices, but can be provoked by imposing as a magic mouse USB device.

• Actualiza a 5.15.0-1106.109

xfrm6: fix uninitialized saddr in xfrm6_get_saddr()

In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm

• Actualiza a 5.15.0-1106.109

HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() Do not crash when a report has no fields. Fake USB gadgets can send their own HID report descriptors and can define report structures without valid fields. This can be used to crash the kernel over USB.

• Actualiza a 5.15.0-1106.109

media: cx23885: Add missing unmap in snd_cx23885_hw_params()

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Add missing unmap in snd_cx23885_hw_params() In error path, add cx23885_alsa_dma_unmap() to release the resource acquired by cx23885_alsa_dma_map().

• Actualiza a 5.15.0-1106.109

Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE.

• Actualiza a 5.15.0-1106.109

KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

• Actualiza a 5.15.0-1106.109

dm-verity: correctly handle dm_bufio_client_create() failure

In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this.

• Actualiza a 5.15.0-1106.109

iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") relies on pci_dev_is_disconnected() to skip ATS invalidation for safely-removed devices, but it does not cover link-down caused by faults, which can still hard-lock the system. For example, if a VM fails to connect to the PCIe device, "virsh destroy" is executed to release resources and isolate the fault, but a hard-lockup occurs while releasing the group fd. Call Trace: qi_submit_sync qi_fl

• Actualiza a 5.15.0-1106.109

ALSA: mixer: oss: Add card disconnect checkpoints

In the Linux kernel, the following vulnerability has been resolved: ALSA: mixer: oss: Add card disconnect checkpoints ALSA OSS mixer layer calls the kcontrol ops rather individually, and pending calls might be not always caught at disconnecting the device. For avoiding the potential UAF scenarios, add sanity checks of the card disconnection at each entry point of OSS mixer accesses. The rwsem is taken just before that check, hence the rest context should be covered by that properly.

pstore: ram_core: fix incorrect success return when vmap() fails

In the Linux kernel, the following vulnerability has been resolved: pstore: ram_core: fix incorrect success return when vmap() fails In persistent_ram_vmap(), vmap() may return NULL on failure. If offset is non-zero, adding offset_in_page(start) causes the function to return a non-NULL pointer even though the mapping failed. persistent_ram_buffer_map() therefore incorrectly returns success. Subsequent access to prz->buffer may dereference an invalid address and cause crashes. Add proper NULL checking for vmap() failures.

• Actualiza a 5.15.0-1106.109

fbcon: check return value of con2fb_acquire_newinfo()

In the Linux kernel, the following vulnerability has been resolved: fbcon: check return value of con2fb_acquire_newinfo() If fbcon_open() fails when called from con2fb_acquire_newinfo() then info->fbcon_par pointer remains NULL which is later dereferenced. Add check for return value of the function con2fb_acquire_newinfo() to avoid it. Found by Linux Verification Center (linuxtesting.org) with SVACE.

• Actualiza a 5.15.0-1106.109