p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-aws-7.0 · Página 108

Vulnerabilidades publicadas para linux-aws-7.0 en los últimos 30 días: 1039. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 5258

  1. CVE-2026-90082

    Sin evaluarEPSS 0,21%Sin corrección publicada

    net: mana: Cap MSI-X vectors to the device MSI-X table size

    In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Cal

    Publicación Actualización
  2. CVE-2026-90081

    Sin evaluarEPSS 0,22%Sin corrección publicada

    net/rds: use wq_has_sleeper() in rds_cong_map_updated()

    In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after a peer's congestion map has been rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the clear-all in the loopback and IB send-completion paths). It bumps rds_cong_generation and then checks waitqueue_active() on map->m_waitq and on rds_poll_waitq to decide whether anyone needs waking. atomic_inc() carries no ordering and waitqueue_active() is a plain load, so nothing orders the map and generation stores before the wait queue reads. The waiters do the mirror image: rds_cong

    Publicación Actualización
  3. CVE-2026-90080

    Sin evaluarEPSS 0,21%Sin corrección publicada

    octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup

    In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup af_xdp_zc_qidx tracks receive queues using AF_XDP zero-copy and is allocated during PF/VF probe. Representors and other non-AF_XDP paths leave the pointer NULL, but several call sites used test_bit() on it unconditionally. Switching to devlink eswitch mode creates representors and runs otx2_init_hw_resources(), which reaches otx2_pool_aq_init() and oopses when dereferencing the NULL bitmap. Add NULL checks before every af_xdp_zc_qidx test_bit() use in the RSS, ethtool, XSK, and pool init paths.

    Publicación Actualización
  4. CVE-2026-90079

    Sin evaluarEPSS 0,21%Sin corrección publicada

    octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init()

    In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init() rvu_mbox_init() is called separately for AF-PF mailboxes during probe and for AF-VF mailboxes when SR-IOV is enabled. Each call used to allocate a new ng_rvu object, leaking the first allocation when the pointer was overwritten on the second call. Sharing one ng_rvu across both paths exposed several teardown bugs: the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even when only the failing init type should be unwound, leaving live AF-PF mailbox memory in use after an AF-VF init failure. mut

    Publicación Actualización
  5. CVE-2026-90078

    Sin evaluarEPSS 0,21%Sin corrección publicada

    net/sched: act_skbmod: fix length calculations and avoid invalid header warnings

    In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: fix length calculations and avoid invalid header warnings syzbot reported a warning in skb_network_header_len() triggered by tcf_skbmod_act(): !skb_transport_header_was_set(skb) WARNING: CPU: 0 PID: 14949 at include/linux/skbuff.h:3243 skb_network_header_len include/linux/skbuff.h:3243 [inline] WARNING: CPU: 0 PID: 14949 at net/sched/act_skbmod.c:55 tcf_skbmod_act+0xfe8/0x1810 net/sched/act_skbmod.c:55 There are a few issues in tcf_skbmod_act(): 1. Calling skb_network_header_len() assumes skb->transport_header is set, which is not guarante

    Publicación Actualización
  6. CVE-2026-90077

    Sin evaluarEPSS 0,21%Sin corrección publicada

    net: fix a resource leak in copy_net_ns() error handling path

    In the Linux kernel, the following vulnerability has been resolved: net: fix a resource leak in copy_net_ns() error handling path Currently, preinit_net() does two things: (1) call ns_common_init() which might fail (2) initialize resources which does not fail However, preinit_net() is returning early when (1) fails, and copy_net_ns() is jumping to the dec_ucounts: label. As a result, resources allocated by net_alloc() are leaking. We need to call key_remove_domain() and net_passive_dec() in order to release resources allocated by net_alloc(). We cannot simply jump to the put_userns: label when preinit_net() failed, for (2) is not yet

    Publicación Actualización
  7. CVE-2026-90076

    Media · CVSS 6.8EPSS 0,21%Sin corrección publicada

    net/sched: fq: add overflow bounds to quantum and initial quantum

    In the Linux kernel, the following vulnerability has been resolved: net/sched: fq: add overflow bounds to quantum and initial quantum fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 * psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill loop adds 0 to f->credit (which stays <= 0) and goto begin loops forever under the qdisc lock, creating a soft lockup. Clamp psched_mtu() to [1, 1 << 20] before

    Publicación Actualización
  8. CVE-2026-90075

    Sin evaluarEPSS 0,22%Sin corrección publicada

    net/sched: fq_codel: clamp default quantum and mtu

    In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_codel: clamp default quantum and mtu fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(), causing an infinite loop and soft lockup. Emulate fq_codel_change() and constrain to [256, FQ_CODEL_QUANTUM_MAX]. The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit below, and fq_codel_change() never updates it. codel_should_drop() tests

    Publicación Actualización
  9. CVE-2026-90074

    Sin evaluarEPSS 0,22%Sin corrección publicada

    net/sched: fq_pie: clamp default quantum to avoid signed overflow

    In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: clamp default quantum to avoid signed overflow fq_pie_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which overflows the signed flow->deficit to INT_MIN in fq_pie_qdisc_dequeue(), causing an infinite loop and soft lockup. Emulate fq_pie_policy which is already bounded to [1, 1 << 20]; clamp the default to [256, 1 << 20]. 256 matches fq_codel's floor and is a sane minimum for a DRR quantum. Conditions to recreate th

    Publicación Actualización
  10. CVE-2026-90073

    Sin evaluarEPSS 0,22%Sin corrección publicada

    net/sched: hhf: clamp quantum before hhf_change() to avoid overflow

    In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: clamp quantum before hhf_change() to avoid overflow hhf_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes weight * quantum overflow the signed deficit in hhf_dequeue(), spinning forever. Clamp q->quantum before hhf_change() so both the opt and !opt paths see a sane quantum. Without this, bare "tc qdisc add ... hhf" succeeds with a clamped quantum but "tc qdisc add ... hhf limit 1000" (any option present) fails with -EINVAL because hhf_change() re

    Publicación Actualización
  11. CVE-2026-90072

    Sin evaluarEPSS 0,22%Sin corrección publicada

    net/sched: sfq: clamp quantum to avoid signed overflow soft lockup

    In the Linux kernel, the following vulnerability has been resolved: net/sched: sfq: clamp quantum to avoid signed overflow soft lockup sfq_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) (unsigned). A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, so slot->allot = INT_MIN and INT_MIN + INT_MIN toggles between INT_MIN and 0 forever, spinning sfq_dequeue() under the qdisc lock. Clamp the quantum to [256, 1 << 20] so the refill loop terminates. The lower bound also covers q->quantum == 0 (psched_mtu() returning 0), which spins sfq_dequeue() identically. sfq_change() alr

    Publicación Actualización
  12. CVE-2026-90071

    Alta · CVSS 7.8EPSS 0,16%Sin corrección publicada

    net/sched: sch_teql: restore skb->dev on the slave failure path

    In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: restore skb->dev on the slave failure path teql_master_xmit() sets skb->dev = slave before calling the slave's ndo_start_xmit(), but never restores it when that transmit fails. The skb then walks on to the next slave still pointing at the previous one. If a later slave has no resolved neighbour, teql_resolve() hands the skb to neigh_event_send(), which queues it on that neighbour's arp_queue with the stale skb->dev. skb->dev holds no reference, so deleting the previous slave frees the net_device while the skb is still queued. Whatever runs next on that

    Publicación Actualización
  13. CVE-2026-90070

    Sin evaluarEPSS 0,22%Sin corrección publicada

    tpm: st33zp24: Return zero on status read failure

    In the Linux kernel, the following vulnerability has been resolved: tpm: st33zp24: Return zero on status read failure st33zp24_status() ignores the result of the transport read and returns data even when no byte was received. The I2C transport, for example, skips i2c_master_recv() when the register-select write is short or fails, leaving data uninitialized. The resulting stack value can be interpreted as TPM_STS flags and let status checks complete spuriously. The status callback cannot propagate a transport error. Return zero unless recv() reports exactly one byte. With no status bits set, callers retry or take their existing timeout or e

    Publicación Actualización
  14. CVE-2026-90069

    Alta · CVSS 7.8EPSS 0,17%Sin corrección publicada

    crypto: acomp - allocate async request context when cloning

    In the Linux kernel, the following vulnerability has been resolved: crypto: acomp - allocate async request context when cloning ACOMP_REQUEST_ON_STACK() reserves only enough storage for the synchronous fallback. When an async implementation is selected, callers clone that stack request before retrying, but acomp_request_clone() currently copies only the stack-sized object. The clone therefore has no storage for the async provider request context, and providers such as QAT write past the allocation through acomp_request_ctx(). KASAN does report a slab OOB write. Allocate a zeroed clone large enough for the runtime acomp request size, copy o

    Publicación Actualización
  15. CVE-2026-90068

    Sin evaluarEPSS 0,22%Sin corrección publicada

    ASoC: dapm: Fix off-by-one check on the second enum channel

    In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix off-by-one check on the second enum channel The snd_soc_dapm_put_enum_double() rejects item[0] once it reaches e->items, but it lets item[1] be equal to it. Both go on to snd_soc_enum_item_to_val(), which indexes e->values with no bound of its own, so an enum with a value table reads one element past the end. The indexing arrived with the MUX consolidation, which relaxed the item[1] check in the same hunk. The value MUX handler it deleted used >= there, and the snd_soc_put_enum_double() in soc-ops.c still does. Only adav80x pairs a value table with two s

    Publicación Actualización
  16. CVE-2026-90067

    Alta · CVSS 7.5EPSS 0,68%Sin corrección publicada

    libceph: validate banner payload length

    In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol banner, the `payload_len` field is decoded from the banner prefix. If a client sends a banner with a `payload_len` of 0, the kernel sets up a 0-length socket read. This violates an invariant in the state machine, triggering a warning in `populate_in_iter()`: ------------[ cut here ]------------ !iov_iter_count(&con->v2.in_iter) WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070 WARNING: net/ceph/messenger_v2.c:3129 at cep

    Publicación Actualización
  17. CVE-2026-90066

    Sin evaluarEPSS 0,21%Sin corrección publicada

    samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify

    In the Linux kernel, the following vulnerability has been resolved: samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify ftrace_direct_multi_init() assigns kthread_run()'s return value to simple_tsk without an IS_ERR() check. When kthread_run() fails it returns ERR_PTR(-ENOMEM), but init still returns 0, so the module loads with simple_tsk holding an error pointer. On unload, ftrace_direct_multi_exit() then passes that ERR_PTR to kthread_stop(), leading to a null-pointer-dereference. Check the return value of kthread_run() with IS_ERR(); on failure, unregister the ftrace direct call and propagate the error code.

    Publicación Actualización
  18. CVE-2026-90065

    Sin evaluarEPSS 0,2%Sin corrección publicada

    net/smc: release the internal TCP sock on IPPROTO_SMC socket creation failure

    In the Linux kernel, the following vulnerability has been resolved: net/smc: release the internal TCP sock on IPPROTO_SMC socket creation failure IPPROTO_SMC sockets create an internal TCP sock ("clcsock") from the proto->init hook. When socket creation fails after proto->init has run - e.g. a cgroup BPF program attached to BPF_CGROUP_INET_SOCK_CREATE denies the socket - sk_common_release() only invokes sk_prot->destroy if it is set, but neither smc_inet_prot nor smc_inet6_prot defines it, and smc_destruct() returns early unless sk_state is SMC_CLOSED. As a result, every failing socket(AF_INET, SOCK_STREAM, IPPROTO_SMC) call leaks one tcp_s

    Publicación Actualización
  19. CVE-2026-90063

    Sin evaluarEPSS 0,21%Sin corrección publicada

    virtio-net: Ensure that TCP packets don't overflow gso_segs

    In the Linux kernel, the following vulnerability has been resolved: virtio-net: Ensure that TCP packets don't overflow gso_segs The user can specify any gso_size in a packet crafted with an AF_PACKET PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user crafts a packet with gso_size < 8, there is a risk for partial GSO to overflow the 16-bit gso_segs field when dividing the SKB length by gso_size. Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly tested at tools/tes

    Publicación Actualización
  20. CVE-2026-90062

    Alta · CVSS 7.1EPSS 0,16%Sin corrección publicada

    netfilter: nf_tables: move hardware offload step after building the chain blob

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: move hardware offload step after building the chain blob Allocate the chain blob before the ruleset offload to reduce chances of entering an inconsistent state where the offloaded ruleset in the nic and the software ruleset differ.

    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →