Vulnerabilidades de linux-aws · Página 166

pds_core: fix deadlock between reset thread and remove

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix deadlock between reset thread and remove pci_reset_function() acquires device_lock before performing the reset. pdsc_remove() is called by the PCI core with device_lock already held. If pdsc_pci_reset_thread() is running when pdsc_remove() is called, destroy_workqueue() will block waiting for the work to complete, while the work is blocked waiting for device_lock - deadlock. Use pci_try_reset_function() which uses pci_dev_trylock() internally. This acquires both the device lock and the PCI config access lock without blocking - if either lock is contended, it

• Actualiza a 6.8.0-1067.70

pds_core: fix use-after-free on workqueue during remove

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix use-after-free on workqueue during remove In pdsc_remove(), the workqueue is destroyed before pdsc_teardown() is called. This ordering allows two paths to queue work on the destroyed workqueue: 1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error path in pdsc_devcmd_locked() queues health_work. 2. A NotifyQ event can trigger the ISR and queue work before free_irq() is called in pdsc_teardown(). Fix by moving destroy_workqueue() after pdsc_teardown() so the workqueue outlives every queuer; destroy_workqueue() then flushes any work still pe

• Actualiza a 6.8.0-1067.70

pds_core: fix auxiliary device add/del races

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix auxiliary device add/del races Two paths add or delete the same slot (pf->vfs[vf_id].padev): a VF's pdsc_reset_done() and the PF's devlink enable_vnet/disable_vnet handler. They serialize on config_lock, but neither guards the slot under it correctly. add() registers and stores a new auxiliary device without first checking the slot, so a second add of an already-populated slot leaks the first device. del() makes that check outside config_lock, so two concurrent dels can both pass it; the first clears the slot, and the second dereferences a NULL pointer. Chec

• Actualiza a 6.8.0-1067.70

sctp: validate stream count in sctp_process_strreset_inreq()

In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g

• Actualiza a 6.8.0-1067.70

net: mctp i3c: clean up notifier and buses if driver register fails

In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() registers the I3C bus notifier and then walks the existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL) before registering the I3C device driver. If i3c_driver_register() fails, the function returns the error directly, leaving the notifier registered and every mctp_i3c_bus object created for the existing buses allocated. The notifier is left pointing into the module that failed to load and the bus list is leaked. Mirror the module exit path on this failure: unregiste

• Actualiza a 6.8.0-1067.70

tipc: fix infinite loop in __tipc_nl_compat_dumpit

In the Linux kernel, the following vulnerability has been resolved: tipc: fix infinite loop in __tipc_nl_compat_dumpit cmd->dumpit callback can return a negative errno, causing an infinite loop due to the while(len) condition. As the loop never terminates, genl_mutex is never released, and other tasks waiting on it starve in D state. Check dumpit's return value, propagate it and jump to err_out on error.

• Actualiza a 6.8.0-1067.70

cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths

In the Linux kernel, the following vulnerability has been resolved: cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and cifs_close_deferred_file_under_dentry(), when a pending deferred close is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to add the file to the local processing list may fail under memory pressure. The loop breaks immediately, but the cancelled work is no longer pending (it would have called _cifsFileInfo_put()), and the cfile is never added to file_head for processing. The cifsFileInfo reference and the open se

wifi: mt76: mt7915: guard HE capability lookups

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: guard HE capability lookups mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after checking HE support, then dereference the HE PHY capability returned by mt76_connac_get_he_phy_cap(). That helper can return NULL when no capability entry matches the vif type. Fetch the capability before appending the TLV and skip the HE-specific setup when no matching capability is available.

• Actualiza a 6.8.0-1067.70

wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv()

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.

• Actualiza a 6.8.0-1067.70

wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap()

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.

• Actualiza a 6.8.0-1067.70

wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht()

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht() mt76_connac_get_eht_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.

• Actualiza a 6.8.0-1067.70

wifi: brcmfmac: fix 802.1X-SHA256 call trace warning

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix 802.1X-SHA256 call trace warning Based on wpa_auth as 1x_256 mode, need to set up "use_fwsup" with BRCMF_PROFILE_FWSUP_1X. Or it will happen trace warning when call brcmf_cfg80211_set_pmk(). [ 4481.831101] ------------[ cut here ]------------ [ 4481.831102] WARNING: CPU: 1 PID: 2997 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac] [...] [ 4481.831202] Call Trace: [ 4481.831204]  <TASK> [ 4481.831205]  nl80211_set_pmk+0x183/0x250 [cfg80211] [ 4481.831233]  genl_family_rcv_msg_doit+0xea/0x150

• Actualiza a 6.8.0-1067.70

drm/vc4: hvs/v3d: Fix null dereference in unbind

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hvs/v3d: Fix null dereference in unbind The hvs and v3d drivers use dev_get_drvdata(master) in their unbind functions. Since the vc4-drm gets removed before its dependent drivers (vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to get drvdata of its master and fails with a null dereference error. Use the data pointer passed to the unbind functions directly instead of dev_get_drvdata(master). This avoids using potentially freed memory.

amt: re-read skb header pointers after every pull

In the Linux kernel, the following vulnerability has been resolved: amt: re-read skb header pointers after every pull Several AMT receive and transmit paths cache a pointer into the skb head (ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call a helper that can reallocate that head before the cached pointer is used again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(), iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all free the old head and move the data, so a pointer taken before the call dangles afterwards and the later access is a use-after-free of the freed head. The affected sites a

• Actualiza a 6.8.0-1067.70

net: hsr: fix memory leak on slave unregistration by removing synced VLANs

In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix memory leak on slave unregistration by removing synced VLANs When an HSR master device is brought UP, it auto-adds VLAN 0 via vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B). If a slave device is later unregistered while HSR is active (e.g., during netns cleanup or interface destruction), hsr_del_port() is called to detach the slave port from the HSR master. However, hsr_del_port() currently does not delete the VLAN IDs that were synced to the slave device by HSR. As a result, the slave device retains a refcount on VID 0 (and any

• Actualiza a 6.8.0-1067.70

sctp: auth: verify auth requirement when auth_chunk is NULL

In the Linux kernel, the following vulnerability has been resolved: sctp: auth: verify auth requirement when auth_chunk is NULL sctp_auth_chunk_verify() returns true unconditionally when chunk->auth_chunk is NULL, silently skipping authentication. This is incorrect when: 1. skb_clone() failed in the BH receive path, leaving auth_chunk NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new connections, so the early sctp_auth_recv_cid() check cannot catch this. 2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never called and auth_chunk remains NULL. Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL: if authent

• Actualiza a 6.8.0-1067.70

vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP v

• Actualiza a 6.8.0-1067.70

tipc: fix u16 MTU truncation in media and bearer MTU validation

In the Linux kernel, the following vulnerability has been resolved: tipc: fix u16 MTU truncation in media and bearer MTU validation Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied MTU values but only enforce a minimum bound, not a maximum. When a user sets the MTU to a value exceeding U16_MAX (65535), it passes validation but is silently truncated when assigned to u16 fields l->mtu and l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000) truncate to 0, causing a division by zero in tipc_link_set_queue_limits() which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing values (e.g. 65537-131071)

• Actualiza a 6.8.0-1067.70

net: qrtr: restrict socket creation to the initial network namespace

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: restrict socket creation to the initial network namespace QRTR keeps its entire port and node state in module-global variables that are not partitioned per network namespace: qrtr_local_nid is a single global node id (always 1) and qrtr_ports is a single global xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that global state with no network-namespace check, and qrtr_create() places no restriction on the namespace a socket is created in. As a result an unprivileged process that creates an AF_QIPCRTR socket in a separate network namespace, e.g. via

• Actualiza a 6.8.0-1067.70

net/mlx5: Fix MCIA register buffer overflow on 32 dword reads

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool:

• Actualiza a 6.8.0-1067.70