Vulnerabilidades de linux-gkeop · Página 175

iio: adc: spear: Initialize completion before requesting IRQ

In the Linux kernel, the following vulnerability has been resolved: iio: adc: spear: Initialize completion before requesting IRQ In the report from Jaeyoung Chung: "spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in spear_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_re

• Actualiza a 6.8.0-1052.56

crypto: amlogic - avoid double cleanup in meson_crypto_probe()

In the Linux kernel, the following vulnerability has been resolved: crypto: amlogic - avoid double cleanup in meson_crypto_probe() When meson_allocate_chanlist() fails after a partial allocation, it already unwinds the allocated chanlist state through its local error path. meson_crypto_probe() then jump to error_flow and calls meson_free_chanlist() again, causing the same per-flow resources to be torn down twice. In the reproduced failure path, the second teardown re-entered crypto_engine_exit() on an already destroyed worker and KASAN reported a slab-use-after-free in kthread_destroy_worker(). Prevent double-free by handling partial alloc

• Actualiza a 6.8.0-1052.56

smb/client: Fix error code in smb2_aead_req_alloc()

In the Linux kernel, the following vulnerability has been resolved: smb/client: Fix error code in smb2_aead_req_alloc() The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work. We would have to do something similar to the previous line where it's cast to int and then long. However, it's simpler to store the return in an int ret variable. This bug would eventually result in a crash when dereference the invalid error pointer.

• Actualiza a 6.8.0-1052.56

smb: client: fix double-free in SMB2_close() replay

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_close() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_close_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free.

• Actualiza a 6.8.0-1052.56

usb: gadget: f_fs: initialize reset_work at allocation time

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: initialize reset_work at allocation time ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on ffs->reset_work when a functionfs instance is unmounted: ffs_data_reset(ffs); cancel_work_sync(&ffs->reset_work); However ffs->reset_work is only ever initialized via INIT_WORK() in ffs_func_set_alt() and ffs_func_disable(), and only on the FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed() when the instance is mounted with the "no_disconnect" option, so for the common case (no "no_disconnect", or mounted and unmounted without eve

• Actualiza a 6.8.0-1052.56

btrfs: do not trim a device which is not writeable

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not trim a device which is not writeable [BUG] There is a bug report that btrfs/242 can randomly fail with the following NULL pointer dereference: run fstests btrfs/242 at 2026-06-01 10:25:08 BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609) BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874 BTRFS info (device sdc): using crc32c checksum algorithm BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS warning (

• Actualiza a 6.8.0-1052.56

dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning

In the Linux kernel, the following vulnerability has been resolved: dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM driver (e.g. amdgpu for video playback in GNOME Videos / Showtime) triggers a spurious warning: DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \ overlapping mappings aren't supported WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0 The call chain is: amdgpu_cs_ioctl -> amdgpu_ttm_backend_bind -> dma_buf_map_attachment -> [udmabuf] map_udmabuf -> get_sg_table -> dma_map_sgtable(

• Actualiza a 6.8.0-1052.56

net: ethernet: arc: emac: quiesce interrupts before requesting IRQ

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: arc: emac: quiesce interrupts before requesting IRQ Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe should not see interrupt delivery in the usual case. However, hardware may still present stale or latched interrupt status left by firmware or the bootloader. If probe later unwinds after devm_request_irq() has installed the handler, such a stale interrupt can still reach arc_emac_intr() during teardown and race with release of the associated net_device. Avoid that window by putting the device into a known quiescent state before reques

• Actualiza a 6.8.0-1046.50

wifi: brcmfmac: drain bus_reset work on device removal

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: drain bus_reset work on device removal brcmf_fw_crashed() and the debugfs "reset" entry both schedule drvr->bus_reset, whose callback recovers drvr through container_of() and dereferences it. The removal path frees drvr (brcmf_free -> wiphy_free) without draining the work, so a bus_reset callback pending or running during removal can outlive drvr. Cancellation cannot live in brcmf_detach() or brcmf_free(): the work callback reaches teardown through the bus .reset op (PCIe brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset -> brcmf_sdiod_remove ->

can: esd_usb: kill anchored URBs before freeing netdevs

In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: kill anchored URBs before freeing netdevs esd_usb_disconnect() frees each CAN netdev with free_candev() inside its per-netdev loop and only calls unlink_all_urbs(dev) afterwards. The per-netdev private data (struct esd_usb_net_priv) is embedded in the net_device allocation returned by alloc_candev(), so once free_candev() has run, dev->nets[i] points to freed memory. unlink_all_urbs() then dereferences the freed dev->nets[i] to kill the per-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)), clear active_tx_jobs, and reset priv->tx_contexts[]. Reo

• Actualiza a 6.8.0-1052.56

usb: gadget: f_midi: cancel pending IN work before freeing the midi object

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: cancel pending IN work before freeing the midi object The f_midi driver embeds a work item (midi->work) whose handler, f_midi_in_work(), dereferences the enclosing struct f_midi through container_of(). This work is armed from two sites: f_midi_complete(), on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSA rawmidi output-stream start. Neither f_midi_disable() nor f_midi_unbind() cancels midi->work. f_midi_disable() only disables the endpoints and drains the in_req_fifo; it does not synchronize the work item, and the sound card is r

• Actualiza a 6.8.0-1052.56

usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown The Broadcom BDC UDC driver registers its IRQ handler with devm_request_irq() in bdc_udc_init(), so the IRQ is released by devm only after bdc_remove() returns. devm releases resources in reverse LIFO order, but bdc_remove() runs bdc_udc_exit() and bdc_hw_exit() -> bdc_mem_free() manually before returning: bdc_udc_exit() tears down individual endpoint objects via bdc_free_ep(), while bdc_hw_exit() -> bdc_mem_free() frees and NULLs the DMA-coherent status-report ring (bdc->srr.sr_bds) and kfree()s bd

• Actualiza a 6.8.0-1052.56

RDMA/rxe: Fix a use-after-free problem in rxe_mmap

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix a use-after-free problem in rxe_mmap rxe_mmap() removes a rxe_mmap_info struct from the pending_mmaps list and releases pending_lock while the struct's kref is still at 1: list_del_init(&ip->pending_mmaps); spin_unlock_bh(&rxe->pending_lock); /* ref == 1, no lock held */ ret = remap_vmalloc_range(vma, ip->obj, 0); /* walks PTEs */ [...] rxe_vma_open(vma); /* kref_get, ref → 2 */ remap_vmalloc_range_partial() walks PTEs without any lock. A concurrent DESTROY_CQ ioctl on another CPU calls: kref_put(&q->ip->ref, rxe_

• Actualiza a 6.8.0-1052.56

xfrm: fix sk_dst_cache double-free in xfrm_user_policy()

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix sk_dst_cache double-free in xfrm_user_policy() xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(), i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with rcu_dereference_protected(), stores NULL and dst_release()s the old dst. That is only safe if no other thread modifies sk_dst_cache concurrently. For a connected UDP socket that does not hold: the transmit fast path (udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly with an atomic xchg(). A per-socket policy change racing a send can make both sides observe

xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()

In the Linux kernel, the following vulnerability has been resolved: xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst() On the error path where in6_dev_get(dev) returns NULL, xfrm6_fill_dst() releases the device reference with netdev_put() but leaves xdst->u.dst.dev set. dst_destroy() later calls netdev_put(dst->dev) again, so the same net_device reference is released twice, underflowing its refcount (ref_tracker WARNING + "unregister_netdevice: waiting for <dev> to become free"). Clear xdst->u.dst.dev after the netdev_put(), the same way the XFRM device-offload paths xfrm_dev_state_add() and xfrm_dev_policy_add()

• Actualiza a 6.8.0-1052.56

xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or fail. But its guard is inverted: it skips policies with prefixlen < threshold and preallocates for the rest. prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the loop preallocates for the exact policies (which never allocate) and skips the inexact ones, whose bi

• Actualiza a 6.8.0-1052.56

ksmbd: validate compound request size before reading StructureSize2

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate compound request size before reading StructureSize2 When ksmbd validates a compound (chained) SMB2 request, ksmbd_smb2_check_message() reads pdu->StructureSize2 without first checking that the compound element is large enough to contain it. StructureSize2 is a 2-byte field at offset 64 (__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element. The compound-walking logic only guarantees that a full 64-byte SMB2 header is present for the trailing element: when NextCommand is 0, len is reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A

• Actualiza a 6.8.0-1052.56

gtp: check skb_pull_data() return in gtp1u_send_echo_resp()

In the Linux kernel, the following vulnerability has been resolved: gtp: check skb_pull_data() return in gtp1u_send_echo_resp() gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr + gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For a 16-19 byte echo request the pull fails and returns NULL without advancing skb->data; execution continues, and the following skb_push() plus the IP header pushed by iptunnel_xmit() move skb->data below skb->head, tripping skb_under_panic(). Fix it by dropping the packet when skb_pull_data() fails. skbuff: skb_

• Actualiza a 6.8.0-1052.56

nexthop: initialize extack in nh_res_bucket_migrate()

In the Linux kernel, the following vulnerability has been resolved: nexthop: initialize extack in nh_res_bucket_migrate() nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to call_nexthop_res_bucket_notifiers(). When nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns -ENOMEM), the error is propagated back before any notifier sets extack._msg, and the error path formats the stale pointer with pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE this dereferences uninitialized stack memory: Oops: general protection fault, probably for non-canonical address ... KASAN: maybe wild-memory-access

• Actualiza a 6.8.0-1052.56

wifi: mac80211: tear down new links on vif update error path

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: tear down new links on vif update error path When ieee80211_vif_update_links() adds new links it allocates a link container for each and calls ieee80211_link_init() (which registers the per-link debugfs files with file->private_data pointing into the container) and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails, the error path restores the old pointers and jumps to 'free', which frees the new containers but never removes their debugfs entries or stops the links. The debugfs files survive with file->private_data dangling at the freed c

• Actualiza a 6.8.0-1052.56