p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-hwe-6.17 · Página 149

Vulnerabilidades publicadas para linux-hwe-6.17 en los últimos 30 días: 956. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 7488

  1. CVE-2026-74746

    Crítica · CVSS 9.8EPSS 0,54%Sin corrección publicada

    netfilter: flowtable: publish GC-visible tuple last

    In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish GC-visible tuple last nf_flow_table_iterate() only treats original-direction tuple nodes as owning entries. Publishing the original node first lets GC observe and free a flow while flow_offload_add() is still inserting the reply node. Publish the reply node first and the original node last so GC never sees a partially installed flow. KASAN can trigger slab-use-after-free read and write reports in the flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del, flow_offload_lookup, etc.).

    Publicación Actualización
  2. CVE-2026-74745

    Alta · CVSS 7.5EPSS 0,45%Sin corrección publicada

    eth: bnxt: avoid deadlock when canceling IRQ affinity notifier

    In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: avoid deadlock when canceling IRQ affinity notifier Unregistering IRQ affinity notifiers waits for the callback synchronously. bnxt takes the netdev instance lock in the notifier (to restart the queue) and cancels the work under the same lock. This may obviously deadlock. Move the restart to the async service task. The queue restart isn't super time sensitive. Store the new TPH tag, schedule the task. Safely canceling the service task is already ironed out. In bnxt_request_irq() the order of registering notifier, affinity and initial TPH programming has to be i

    Publicación Actualización
  3. CVE-2026-74744

    Crítica · CVSS 9.8EPSS 0,51%Sin corrección publicada

    ipvlan: inherit needed_headroom and needed_tailroom from phy_dev

    In the Linux kernel, the following vulnerability has been resolved: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_har

    Publicación Actualización
  4. CVE-2026-74743

    Crítica · CVSS 9.8EPSS 0,54%Sin corrección publicada

    macvlan: inherit needed_headroom and needed_tailroom from lowerdev

    In the Linux kernel, the following vulnerability has been resolved: macvlan: inherit needed_headroom and needed_tailroom from lowerdev macvlan devices inherit hard_header_len from lowerdev during macvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying lowerdev requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / macvlan

    Publicación Actualización
  5. CVE-2026-74742

    Alta · CVSS 7.5EPSS 0,46%Sin corrección publicada

    veth: fix queue index used to wake the peer txq in veth_poll

    In the Linux kernel, the following vulnerability has been resolved: veth: fix queue index used to wake the peer txq in veth_poll veth_poll() derives the index of the peer TX queue to wake from rq->xdp_rxq.queue_index. That field is only initialized by xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an XDP program is attached. On the plain GRO/NAPI path (veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so queue_index stays 0 for every queue, as priv->rq is zero-allocated. So in a multi-queue setup with GRO enabled and no XDP program attached, every NAPI instance looks at the peer's TX queue 0. If veth_xmit()

    Publicación Actualización
  6. CVE-2026-74741

    Alta · CVSS 7.5EPSS 0,61%Sin corrección publicada

    net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling

    In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences wx->msix_entry->entry, leading to a NULL pointer dereference crash. This issue was introduced by fixing the IRQ vector when the number of VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to determine the correct vector index. Additionally, as a side fix, set the interrupt mask to BIT(0) for the non-MSI-X fallback. In MSI/INTx mode, the MISC a

    Publicación Actualización
  7. CVE-2026-74740

    Media · CVSS 5.7EPSS 0,18%Sin corrección publicada

    net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain

    In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking rcu_access_pointer(a->goto_chain) and then calling tcf_action_goto_chain_exec(), which does a second, independent rcu_dereference_bh(a->goto_chain) read and immediately dereferences chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact replace path) can clear a->goto_chain between the two reads, so the second read returns NULL and tcf_action_goto_chain_exec() dereferences NULL. Fix the race by doing a single rcu_dereference_bh() read

    Publicación Actualización
  8. CVE-2026-74739

    Alta · CVSS 7.8EPSS 0,14%Sin corrección publicada

    net/sched: cls_u32: skip hash tables in u32_bind_class()

    In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: skip hash tables in u32_bind_class() u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter ad

    Publicación Actualización
  9. CVE-2026-74738

    Sin evaluarEPSS 0,21%Sin corrección publicada

    regmap: sdw-mbq: don't call an unset readable_reg callback

    In the Linux kernel, the following vulnerability has been resolved: regmap: sdw-mbq: don't call an unset readable_reg callback regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit by calling ctx->readable_reg(), which is a straight copy of config->readable_reg. That callback is optional: regmap_readable() treats a NULL ->readable_reg as "every register is readable", and drivers rely on that. es9356 and tac5xx2-sdw both build an MBQ regmap without one. Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable controls") the poll runs on every -ENODATA, not only for Controls the driver marked deferrable, s

    Publicación Actualización
  10. CVE-2026-74737

    Crítica · CVSS 9.8EPSS 0,55%Sin corrección publicada

    net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG

    In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG On the packet reception path, the ID of the MAC Port on which the packet was received, is embedded in the RX DMA Descriptor's metadata. The ID is extracted using the helper function cppi5_desc_get_tags_ids() which fills in the 16-bit Source Tag into the 'port_id' variable. However, it is only the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID, while the upper 8-bits are Hardware-Reserved and carry an arbitrary value. With the existing logic, sporadic kernel crash is observed due to

    Publicación Actualización
  11. CVE-2026-74736

    Alta · CVSS 7.8EPSS 0,14%Sin corrección publicada

    net/sched: cls_bpf: reject dev-bound programs bound to a different device

    In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: reject dev-bound programs bound to a different device cls_bpf_prog_from_efd() obtained a SCHED_CLS program via bpf_prog_get_type_dev() but never verified that a device-bound (offloaded) program's bound netdev matches the TC netdev the classifier is being attached to. This let a program loaded with prog_ifindex for device A be attached via cls_bpf + skip_sw to device B; deleting device A then destroyed the program's offload state while it was still attached to device B, triggering a netdevsim WARN (panic with panic_on_warn=1). Mirror the XDP attach path

    Publicación Actualización
  12. CVE-2026-74735

    Media · CVSS 6.8EPSS 0,18%Sin corrección publicada

    l2tp: fix tunnel and session refcount leak on seq_file release

    In the Linux kernel, the following vulnerability has been resolved: l2tp: fix tunnel and session refcount leak on seq_file release In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state (pd->tunnel and pd->session) is kept in seq_file private data to allow iteration across multiple read() system calls. However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels before reading to end-of-file (EOF), any tunnel or session reference stored in pd->tunnel / pd->session is left un-dropped when seq_file private data is freed. Fix this by dropping any remaining pd->tunnel and pd->session references in pppol2tp_proc_

    Publicación Actualización
  13. CVE-2026-74734

    Media · CVSS 5.1EPSS 0,21%Sin corrección publicada

    firewire: ohci: fix NULL pointer dereference in ar_context_release

    In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: fix NULL pointer dereference in ar_context_release During the error handling path of the driver's probe function, a NULL pointer dereference can occur in ar_context_release(). When pci_probe() fails early (e.g., if pcim_enable_device() or MMIO mapping fails), the devres cleanup mechanism invokes release_ohci(). This function unconditionally calls ar_context_release() to clean up the asynchronous receive contexts. However, if ar_context_init() was not yet called, ctx->ohci remains NULL (as the fw_ohci structure is zero-initialized by devres_alloc()). ar_con

    Publicación Actualización
  14. CVE-2026-74733

    Alta · CVSS 7.8EPSS 0,18%Sin corrección publicada

    gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock

    In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register.

    Publicación Actualización
  15. CVE-2026-74730

    Crítica · CVSS 9.8EPSS 0,51%Sin corrección publicada

    NFS: Pin the 'struct nfs_server' during a FREE_STATEID call

    In the Linux kernel, the following vulnerability has been resolved: NFS: Pin the 'struct nfs_server' during a FREE_STATEID call Dan Aloni reports that he was able to hit a use-after-free bug if a FREE_STATEID operation gets delayed for whatever reason. Fix this by bumping the refcount of the 'struct nfs_server' object for the duration of the FREE_STATEID so it doesn't get cleaned up from underneath us while operations are still in flight.

    Publicación Actualización
  16. CVE-2026-74729

    Sin evaluarEPSS 0,21%Sin corrección publicada

    soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read

    In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory expos

    Publicación Actualización
  17. CVE-2026-74728

    Sin evaluarEPSS 0,21%Sin corrección publicada

    xfs: handle NULL b_addr in xfs_buf_free

    In the Linux kernel, the following vulnerability has been resolved: xfs: handle NULL b_addr in xfs_buf_free When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with bp->b_addr still NULL. The code falls through to the folio_put path which calls virt_to_folio(NULL), dereferencing an invalid address and causing a kernel crash. Call Trace: xfs_buf_free+0x25f/0x510 xfs_buf_alloc+0xc98/0x19b0 xfs_buf_find_insert+0x55/0x14d0 xfs_buf_get_map+0x122b/0x17c0 xfbtree_init_leaf_block+0x11c/0x4a0 xfbtree_init+0x1bb/0x460 xrep_rmap_setup_scan+0x100/0x1f0 xrep_rmapbt+0x41/0xc0 Fix this by skipping folio_put() when bp->b_ad

    Publicación Actualización
  18. CVE-2026-74727

    Crítica · CVSS 9.8EPSS 0,65%Código de explotación públicoSin corrección publicada

    ovpn: skip rehash for peers already removed from by_id

    In the Linux kernel, the following vulnerability has been resolved: ovpn: skip rehash for peers already removed from by_id ovpn_nl_peer_set_doit() resolves the target peer via ovpn_peer_get_by_id() before taking ovpn->lock. In the window between the lookup (which only takes a refcount) and the subsequent spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive expiry, or socket teardown can take ovpn->lock first, run ovpn_peer_remove() to unhash the peer from all four tables (by_id, by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which re-inserts the now-

    Publicación Actualización
  19. CVE-2026-74726

    Alta · CVSS 7.3EPSS 0,13%Sin corrección publicada

    bonding: alb: re-check primary_is_promisc under RTNL in bond_alb_monitor

    In the Linux kernel, the following vulnerability has been resolved: bonding: alb: re-check primary_is_promisc under RTNL in bond_alb_monitor bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the active slave. In that window the active slave can change under RTNL (RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()), which already drops the promiscuity and clears primary_is_promisc. The monitor still acts on the stale decision: if the slave was removed with no failover, curr_active_slave is now NULL and the deref faults; if it fa

    Publicación Actualización
  20. CVE-2026-74725

    Alta · CVSS 7.8EPSS 0,12%Sin corrección publicada

    enic: fix tx_hang_reset use-after-free on device removal

    In the Linux kernel, the following vulnerability has been resolved: enic: fix tx_hang_reset use-after-free on device removal enic_remove() cancels the reset and change_mtu_work items but does not cancel tx_hang_reset. A TX timeout that fires while the device is being removed can schedule enic_tx_hang_reset() so that it runs after free_netdev(), resulting in a use-after-free. cancel_work_sync() alone is not sufficient here: the still-live watchdog and notify paths can re-schedule these work items in the window between the cancel and unregister_netdev(). Use disable_work_sync(), which cancels the work and blocks any subsequent schedule_work(

    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →