nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup.
nvme-multipath: fix flex array size in struct nvme_ns_head
In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: fix flex array size in struct nvme_ns_head
struct nvme_ns_head contains a flexible array member, current_path[],
which is indexed using the NUMA node ID:
head->current_path[numa_node_id()]
The structure is currently allocated as:
size = sizeof(struct nvme_ns_head) +
(num_possible_nodes() * sizeof(struct nvme_ns *));
head = kzalloc(size, GFP_KERNEL);
This allocation assumes that NUMA node IDs are sequential and densely
packed from 0 .. num_possible_nodes() - 1. While this assumption holds
on many systems, it is not always true on some architectures s
nvme-pci: fix out-of-bounds access in nvme_setup_descriptor_pools
In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix out-of-bounds access in nvme_setup_descriptor_pools
nvme_setup_descriptor_pools() indexes dev->descriptor_pools[] using the
numa_node forwarded from hctx->numa_node by its single caller,
nvme_init_hctx_common(). On a non-NUMA kernel hctx->numa_node is
NUMA_NO_NODE (-1). Because the parameter was declared 'unsigned', the
value becomes UINT_MAX and the index walks off the array (sized to
nr_node_ids), faulting during nvme_alloc_ns() and leaving the namespace
without a /dev node.
Reproduces on any NVMe controller probed by a CONFIG_NUMA=n kernel:
BUG: unabl
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a c
gpu: host1x: Allow entries in BO caches to be freed
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Allow entries in BO caches to be freed
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak
gpu: host1x: Fix iommu_map_sgtable() return value check
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix iommu_map_sgtable() return value check
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable.
dax/kmem: account for partial discontiguous resource upon removal
In the Linux kernel, the following vulnerability has been resolved:
dax/kmem: account for partial discontiguous resource upon removal
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrec
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe
get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue
buffer, which is mapped into userspace. It validates num_sge against
max_sge, but then re-reads the same field to calculate the memcpy
size. A concurrent userspace thread can modify num_sge between
validation and use, causing a heap buffer overflow when copying the
WQE into qp->resp.srq_wqe.
Read num_sge into a local variable and use it for both the bounds
check and the size calculation.
RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path
For non-SRQ QPs, the responder reads WQE fields directly from the
shared queue buffer mapped into userspace. This allows a malicious
user to modify fields like num_sge or sge entries while the kernel
is processing the WQE, leading to out-of-bounds reads in
rxe_resp_check_length() and copy_data().
Introduce get_recv_wqe() that validates num_sge and copies the WQE
to a kernel-local buffer before processing, matching the approach
already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is
reused since SRQ and no
md/raid10: reset read_slot when reusing r10bio for discard
In the Linux kernel, the following vulnerability has been resolved:
md/raid10: reset read_slot when reusing r10bio for discard
put_all_bios() always drops devs[i].bio, but it only drops
devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an
r10bio that was previously used for a read, read_slot can still be
non-negative, and discard cleanup can skip bio_put() on repl_bio.
Reset read_slot to -1 when preparing an r10bio for discard so the
replacement bio is always released correctly.
md/raid1,raid10: fix deadlock in read error recovery path
In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios.
md/raid1,raid10: fix error-path detection with md_cloned_bio()
In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure.
md/raid1,raid10: fix bio accounting for split md cloned bios
In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accor
raid1: fix nr_pending leak in REQ_ATOMIC bad-block error path
In the Linux kernel, the following vulnerability has been resolved:
raid1: fix nr_pending leak in REQ_ATOMIC bad-block error path
In raid1_write_request(), each per-mirror loop iteration begins by
incrementing rdev->nr_pending. If a REQ_ATOMIC write encounters a
badblock within the requested range, the code jumps to err_handle
without dropping the reference taken for the current mirror.
err_handle's cleanup loop will only decrements for k < i and
r1_bio->bios[k] is non-NULL. The current slot is therefore skipped,
leaving its nr_pending reference leaked permanently. The reference
prevents the rdev from ever being removed, since raid1_remove
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is str
Media · CVSS 6.9EPSS 0,17%Sin corrección publicada
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Pro
wifi: ath12k: fix inconsistent arvif state in vdev_create error paths
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix inconsistent arvif state in vdev_create error paths
ath12k_mac_vdev_create() has three error path issues that leave arvif
in an inconsistent state:
1. When ath12k_wmi_vdev_create() fails, the function returns directly
without clearing arvif->ar, which was already set before the WMI
call. Subsequent code checking arvif->ar to determine vdev readiness
will see a non-NULL value despite no vdev existing in firmware.
2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the
code jumped to err: skipping the DP peer cleanup and vdev rollb
wifi: ath12k: fix NULL deref in change_sta_links for unready link
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL deref in change_sta_links for unready link
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
nvdimm/btt: Handle preemption in BTT lane acquisition
In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Handle preemption in BTT lane acquisition
BTT lanes serialize access to per-lane metadata and workspace state
during BTT I/O. The btt-check unit test reports data mismatches during
BTT writes due to a race in lane acquisition that can lead to silent
data corruption.
The existing lane model uses a spinlock together with a per-CPU
recursion count. That recursion model stopped being valid after BTT
lanes became preemptible: another task can run on the same CPU,
observe a non-zero recursion count, bypass locking, and use the same
lane concurrently.
BTT lanes are a
bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs
In the Linux kernel, the following vulnerability has been resolved:
bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs
commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning
htab with internal structs") moved inode cleanup from ->free_inode()
into ->destroy_inode() to avoid sleeping in RCU context when calling
bpf_any_put(). However this removed the RCU delay on freeing the
inode itself and the cached symlink body (i_link), both of which
can be accessed by RCU pathwalk (pick_link, may_lookup etc.).
This causes a use-after-free when a concurrent unlinkat() drops the
last inode reference and destroy_inode() frees the i