p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de linux-xilinx · Página 163

Vulnerabilidades publicadas para linux-xilinx en los últimos 30 días: 795. Incluidas en el catálogo KEV: 0.

RSS ↗ JSON ↗
Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 9102

  1. CVE-2026-68368

    Sin evaluarEPSS 0,22%Sin corrección publicada

    usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb()

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb() When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length against frame_max but does not verify that the datagram fits within the declared block length. Additionally, when decoding multiple NTBs from a single socket buffer, subsequent block lengths are not checked against the actual remaining buffer data. With these checks missing, a malicious USB host can specify datagram offsets and lengths that point beyond the block, or supply secondary NTB headers declaring lengths larger than the buffer

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  2. CVE-2026-68367

    Sin evaluarEPSS 0,18%Sin corrección publicada

    usb: gadget: f_tcm: synchronize delayed set_alt with teardown

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: synchronize delayed set_alt with teardown The f_tcm set_alt() path defers endpoint setup to a work item and completes the delayed status response from process context. The delayed work uses f_tcm private state and may complete the setup request after disconnect or function teardown has already moved on. Cancel and drain the delayed set_alt work when the function is unbound or freed. For disable paths, which are reached under the composite device lock, use a small state machine and a non-sleeping cancellation path instead of cancel_work_sync(). If the wo

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  3. CVE-2026-68366

    Sin evaluarEPSS 0,18%Sin corrección publicada

    usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  4. CVE-2026-68365

    Sin evaluarEPSS 0,18%Sin corrección publicada

    USB: serial: io_edgeport: cap received transmit credits

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_edgeport: cap received transmit credits The interrupt-status packet reports transmit credits returned by the device. edge_interrupt_callback() adds the 16-bit value to txCredits without checking maxTxCredits. edge_write() uses txCredits minus the software FIFO count as the amount of data that fits. Since the FIFO is allocated with maxTxCredits bytes, txCredits exceeding maxTxCredits can cause OOB write in ring buffer. Cap accumulated credits at maxTxCredits. Conforming devices should never hit the cap.

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  5. CVE-2026-68363

    Sin evaluarEPSS 0,18%Sin corrección publicada

    wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request ath9k_hif_request_firmware() re-arms an asynchronous firmware load via request_firmware_nowait(), passing hif_dev as the completion context, and then still dereferences hif_dev: dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n", hif_dev->fw_name); The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events" workqueue and, when the firmware is missing, walks the retry chain into ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That releases the w

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  6. CVE-2026-68362

    Sin evaluarEPSS 0,17%Sin corrección publicada

    wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set unconditionally even when ath11k_core_qmi_firmware_ready() fails. This leaves the driver in an inconsistent state where initialization is considered complete although the firmware ready handling did not finish successfully. During the subsequent SSR, the driver enters the restart path based on this incorrect state and dereferences uninitialized srng members, resulting in a NULL pointer dereference. Call trace: ath11k_hal_srng_access_begin

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  7. CVE-2026-68361

    Sin evaluarEPSS 0,19%Sin corrección publicada

    hwmon: (corsair-psu) Stop device IO before calling hid_hw_stop

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-psu) Stop device IO before calling hid_hw_stop hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within corsairpsu_probe(). If the probe operation fails after "io start" has been initiated, this race condition will result in a uaf vulnerability [1]. CPU0 CPU1 ==== ==== corsairpsu_probe() hid_device_io_start() ... unlock driver_input_lock hid_hw_stop() kfree(hidraw) __hid_input_report() ... acquire driver_input_l

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  8. CVE-2026-68360

    Sin evaluarEPSS 0,24%Sin corrección publicada

    hwmon: (corsair-cpro) Stop device IO before calling hid_hw_stop

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop().

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  9. CVE-2026-68359

    Sin evaluarEPSS 0,23%Sin corrección publicada

    hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop().

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  10. CVE-2026-68357

    Sin evaluarEPSS 0,18%Sin corrección publicada

    watchdog: pretimeout: Fix UAF in watchdog_unregister_governor()

    In the Linux kernel, the following vulnerability has been resolved: watchdog: pretimeout: Fix UAF in watchdog_unregister_governor() When a watchdog governor is unregistered, it updates existing watchdog devices that were using this governor by falling back to `default_gov`. If the governor being unregistered is currently set as `default_gov`, the `default_gov` is never cleared. This leads to 2 use-after-free issues: 1. New watchdog devices registered after this point will inherit the dangling `default_gov`. 2. Existing watchdog devices using the unregistered governor will have their `wdd->gov` reassigned to the dangling `default_gov

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  11. CVE-2026-68355

    Sin evaluarEPSS 0,18%Sin corrección publicada

    wifi: ath11k: fix potential buffer underflow in ath11k_hal_rx_msdu_list_get()

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix potential buffer underflow in ath11k_hal_rx_msdu_list_get() When the first entry in msdu_details has a zero buffer address, the code accesses msdu_details[i - 1] with i == 0, causing a buffer underflow. Fix similarly to ath12k_wifi7_hal_rx_msdu_list_get() by adding a separate check for i == 0 before the main condition to prevent the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE.

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  12. CVE-2026-68354

    Alta · CVSS 8.8EPSS 0,28%Sin corrección publicada

    firewire: net: Fix fragmented datagram reassembly

    In the Linux kernel, the following vulnerability has been resolved: firewire: net: Fix fragmented datagram reassembly fwnet_frag_new() keeps a sorted list of received fragments for a partial datagram. When a new fragment is adjacent to an existing fragment, the code checks whether the new fragment also closes the gap to the next or previous list entry. Those neighbor lookups currently assume that the current fragment always has a real next or previous fragment. At a list edge, the next or previous entry is the list head, not a struct fwnet_fragment_info. The gap checks also compare against the old edge of the current fragment instead of t

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  13. CVE-2026-68353

    Alta · CVSS 8.1EPSS 0,29%Sin corrección publicada

    wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries.

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  14. CVE-2026-68352

    Alta · CVSS 8.3EPSS 0,41%Sin corrección publicada

    wifi: ath6kl: fix OOB read from firmware IE lengths in connect event

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware IE lengths in connect event The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len fields in ath6kl_wmi_connect_event_rx() are not validated against the buffer length. Their sum (up to 765) can exceed the actual WMI event data, causing out-of-bounds reads during IE parsing and state corruption of wmi->is_wmm_enabled. Add a check that the total IE length fits within the buffer.

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  15. CVE-2026-68351

    Sin evaluarEPSS 0,22%Sin corrección publicada

    wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read

    In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read When the firmware sends a command response with a length mismatch, carl9170_cmd_callback() logs the mismatch and calls carl9170_restart() but then falls through to memcpy(ar->readbuf, buffer + 4, len - 4). Since len comes from the firmware and can exceed ar->readlen, this copies more data than the readbuf was allocated for. Bound the memcpy to min(len - 4, ar->readlen) so that the response is still completed -- avoiding repeated restarts from queued garbage -- while preventing an overread past the resp

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  16. CVE-2026-68350

    Sin evaluarEPSS 0,18%Sin corrección publicada

    wifi: carl9170: fix OOB read from off-by-two in TX status handler

    In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix OOB read from off-by-two in TX status handler The bounds check in carl9170_tx_process_status() uses `i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing 2 extra iterations past valid _tx_status entries when the firmware- controlled hdr.ext exceeds hdr.len/2. Fix by using the correct comparison `i >= (cmd->hdr.len / 2)`.

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  17. CVE-2026-68349

    Sin evaluarEPSS 0,2%Sin corrección publicada

    wifi: carl9170: fix buffer overflow in rx_stream failover path

    In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix buffer overflow in rx_stream failover path The failover continuation in carl9170_rx_stream() copies the full tlen from the second USB transfer instead of capping at rx_failover_missing bytes. When both transfers are near maximum size, the total exceeds the 65535-byte failover SKB, triggering skb_over_panic. Limit the copy size to the missing byte count. [Fix checkpatch CHECK:PARENTHESIS_ALIGNMENT]

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  18. CVE-2026-68348

    Alta · CVSS 7.1EPSS 0,13%Sin corrección publicada

    ASoC: tas2781: bound firmware description string parsing

    In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2781: bound firmware description string parsing The TAS2781 firmware parser reads several variable-length description strings with strlen() before checking that the string terminator is present inside the firmware blob. A malformed firmware image without a NUL terminator can therefore make the parser walk past the end of the firmware buffer before the later size checks run. Add a small bounded string-length helper and use it for all description fields that are parsed from the firmware buffer. Keep the existing size checks for the fixed bytes that follow each strin

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  19. CVE-2026-68346

    Sin evaluarEPSS 0,21%Sin corrección publicada

    ALSA: hda: cs35l41: validate and free ACPI mute object

    In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: validate and free ACPI mute object cs35l41_get_acpi_mute_state() evaluates a _DSM method to get the ACPI mute state and reads the first byte from the returned object. However, the returned ACPI object is owned by the caller and is never freed after use, so each successful query leaks the _DSM result object. The code also assumes that the returned object is a buffer with at least one byte. A malformed firmware response can return a different object type or an empty buffer, and the direct ret->buffer.pointer dereference can then access an invalid pointer

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

  20. CVE-2026-68343

    Crítica · CVSS 9.1EPSS 0,51%Sin corrección publicada

    smb: client: validate DFS referral PathConsumed

    In the Linux kernel, the following vulnerability has been resolved: smb: client: validate DFS referral PathConsumed parse_dfs_referrals() validates that the response contains the fixed referral entry array and, on for-next, the per-referral string offsets. However, the response also contains a PathConsumed value that is later used for DFS path parsing. If a malformed response provides a PathConsumed value larger than the search name, later DFS parsing can advance beyond the end of the path. Validate PathConsumed against the search name length before storing it in the parsed referral.

    linux-xilinxSistemas operativos
    Publicación Actualización
    Aviso original 1 ↗Aviso original 2 ↗Aviso original 3 ↗

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →