power: supply: max17040: synchronize work cancellation on suspend
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: synchronize work cancellation on suspend
max17040_work() requeues itself after every poll. cancel_delayed_work()
only cancels a pending instance and does not wait for a callback that is
already running.
If system suspend races with the polling callback, the callback can
continue accessing the fuel gauge and requeue itself after the suspend
callback returns.
Use cancel_delayed_work_sync() to ensure polling is quiesced before
suspend completes.
s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks
In the Linux kernel, the following vulnerability has been resolved:
s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks
The command 'perf stat -e cycles -- <command>' crashes the kernel
when CPUs are hotplug added during that run.
Root cause is the allocation of struct cpu_cf_events at first
event initialization. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i
s390/dasd: Do not complete a failed ESE read as successful
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Do not complete a failed ESE read as successful
dasd_int_handler() completes an NRF read of an unallocated ESE track by
calling ese_read() and unconditionally marking the request
DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has
zeroed the destination buffer: a failed sense-data parse or a current
track outside the requested range both return early, leaving the
destination pages untouched. The request is still completed successfully,
so the block layer is handed stale / uninitialized memory instead of
zeros.
Check the ese_read() return val
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
Several sysfs show/store handlers call a discipline callback that
dereferences device->private, either directly or through the
DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline
is assigned before check_device() allocates device->private, so an
unprivileged read of one of these world-readable attributes in that window
dereferences a NULL pointer and panics.
Guard the dereference inside each callback that actually touches
device->private.
s390/dasd: Propagate partial completion length across ERP recovery
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Propagate partial completion length across ERP recovery
dasd_default_erp_postaction() copies the timing and device state from
the finished ERP request back to the original request but drops
proc_bytes. A request that was partially completed, an ESE read of a
not-yet-allocated track returns fewer bytes than requested, and then
recovered through the ERP chain loses its partial-completion length.
__dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole
request instead of requeueing the remainder, silently returning zeroed
data for the part that was nev
PCI: plda: Fix use-after-free of event IRQs during teardown
In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Fix use-after-free of event IRQs during teardown
plda_pcie_irq_domain_deinit() removes pcie->event_domain via
irq_domain_remove(), but the per-event IRQs mapped from that domain
are requested with devm_request_irq() in plda_init_interrupts(). The
actual free_irq() for a devm-managed IRQ is deferred by devres until
after the calling probe()/remove() function returns.
This means irq_domain_remove() can free the domain's internal data
before the deferred free_irq() for IRQs still mapped into it has run.
When devres later processes that deferred cleanup, it can end
PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts()
In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts()
plda_init_interrupts() initializes IRQ domains and creates IRQ mapping but
does not unwind them when later step fails.
If platform_get_irq() or either irq_create_mapping() fails
in plda_init_interrupts(), the domains are never deinitialized. If
irq_create_mapping() fails, port->intx_irq stays initialized.
Hence, remove the IRQ domains in the error path by calling
plda_pcie_irq_domain_deinit().
Since plda_pcie_irq_domain_deinit() now disposes of the intx_irq and
msi_irq mappings itself before rem
iommu/amd: Put PCI device after handling PPR faults
In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Put PCI device after handling PPR faults
iommu_call_iopf_notifier() looks up the requester with
pci_get_domain_bus_and_slot(), which returns a PCI device with its
reference count incremented.
Neither the successful iommu_report_device_fault() path nor the abort
path drops that reference, so every handled PPR request leaks a PCI
device reference.
This is the same ownership rule that was fixed for the old iommu_v2
ppr_notifier() path by commit 6cf0981c2233 ("iommu/amd: Fix pci device
refcount leak in ppr_notifier()"), but iommu_call_iopf_notifier() was
added late
iommu/msm: Unwind probe state on registration failure
In the Linux kernel, the following vulnerability has been resolved:
iommu/msm: Unwind probe state on registration failure
msm_iommu_probe() adds its devm-managed IOMMU object to
qcom_iommu_devices before adding the IOMMU sysfs device and registering
it with the IOMMU core.
If iommu_device_sysfs_add() fails, probe returns with the object still on
qcom_iommu_devices. The driver core then releases the devm allocation,
leaving a dangling list entry that later list walks may dereference.
If iommu_device_register() fails, the same dangling list entry remains
and the sysfs device is left registered as well.
Unwind the sysfs device and global li
iommu/sva: Set handle->dev before the SVA handle is visible
In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: Set handle->dev before the SVA handle is visible
iommu_attach_device_pasid() installs the new SVA attach handle in the
group PASID lookup before iommu_sva_bind_device() returns. A concurrent
bind can therefore find and reuse the same handle after iommu_sva_lock is
dropped.
handle->dev was initialized after dropping iommu_sva_lock. This leaves a
window where a racing bind can return a handle whose dev pointer is still
NULL. A subsequent iommu_sva_unbind_device() can then dereference it via
handle->dev->iommu_group.
Initialize handle->dev before releasing iommu_s
iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field
In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field
tegra241_vintf_init_vsid() programs the guest-provided vSID into SID_MATCH,
whose VIRT_SID field spans bits [20:1] with bit 0 as the match-enable flag.
The HW therefore matches only a 20-bit Stream ID.
The bound check rejects only virt_sid > UINT_MAX, which admits a value far
wider than the field. The write "virt_sid << 1 | 0x1" then drops every bit
above 20: a virt_sid of 0x80000000 lands as SID_MATCH = 0x1, a valid match
on vSID 0, so the entry aliases the wrong Stream ID. Because vdev->virt_id
is guest-c
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
iommu_mock_device_add() first calls iommu_fwspec_init(), which on
success allocates both dev->iommu (via dev_iommu_get()) and
dev->iommu->fwspec. If the subsequent device_add(dev) call fails,
the error path only calls iommu_fwspec_free(dev), which frees
fwspec but leaves dev->iommu still allocated.
This triggers the following kmemleak report when fuzzing with Syzkaller:
BUG: memory leak
unreferenced object 0xffff888011e0a200 (size 192):
comm "syz.1.1695", pid 24885, jiffies 4295222527
hex
iommu/vt-d: Force requesting ACS when tboot is enabled
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Force requesting ACS when tboot is enabled
Currently the conditions of requesting ACS in detect_intel_iommu()
don't include tboot, leading to a possible misconfiguration with ACS
disabled (e.g. due to user opts) while iommu is later forced on by
tboot_force_iommu().
Fix it by checking tboot in detect_intel_iommu().
iommufd: Avoid locking internal accesses during unmap
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Avoid locking internal accesses during unmap
iommufd_access_notify_unmap() skips internal accesses because they do
not have an external unmap callback to invoke.
However, the current test calls iommufd_lock_obj() before checking
whether the access is internal. If iommufd_lock_obj() succeeds, the loop
then sees the internal access and continues, bypassing the matching
iommufd_put_object() used by the normal unmap path. This leaks the
object reference taken by iommufd_lock_obj().
Check for internal accesses first so skipped entries are never locked.
iommufd: Release current IOAS on xa_store() failure
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Release current IOAS on xa_store() failure
iommufd_take_all_iova_rwsem() takes an object reference and the
iova_rwsem write lock before storing the IOAS in the temporary ioas_list
xarray.
If xa_store() fails, the current IOAS has not been inserted into
ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS
objects already present in that xarray, so it cannot release the current
IOAS.
Release the current IOAS rwsem and object reference before unwinding the
previously stored entries.
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix UAF in selftest IOPF reporting
IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from
group->pasid_array without synchronizing against PASID detach,
then a concurrent iommu_report_device_fault() can dereference
that borrowed handle's domain pointer after the detach erases
the handle and frees the backing struct iommufd_attach_handle.
TRIGGER_IOPF then dereferences the freed handle, causing a UAF.
Fix by adding a iopf_rwsem in mock_dev to follow the expected design
of a real driver. Hold its read side across the whole
iommu_report_device_fault() call, and
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer
set_attribute() populates the security area of the BIOS attribute request
buffer with the current admin password via populate_security_buffer(), then
dumps the whole request buffer with print_hex_dump_bytes(). This can expose
the plaintext admin password in the kernel log.
The same issue was fixed for the password attribute path by
commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump
plaintext password data"). Remove the remaining dump from the BIOS
attribute path.
platform/x86: ISST: Validate level in perf mask ioctls
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate level in perf mask ioctls
isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the
user-provided level as an index into perf_levels[] via
_read_pp_level_info() and _read_bf_level_info(), but neither helper
validates it first.
The adjacent level-info helpers reject levels above max_level before
reading the same per-level register block. Add the same bounds checks to
the mask helpers, and reject disabled SST-PP levels in
isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info().
This prevents out-of-bounds reads from the
platform/x86: ISST: Validate socket ID in clos_assoc ioctl
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate socket ID in clos_assoc ioctl
isst_if_clos_assoc() validates the user-supplied socket_id with
'socket_id > topology_max_packages()', but isst_common.sst_inst[] is
allocated with topology_max_packages() entries, so the valid index range
is [0, topology_max_packages()). The '>' comparison lets
socket_id == topology_max_packages() pass and index one entry past the
array.
In addition, isst_common.sst_inst[socket_id] is NULL for an in-range
package that has no bound TPMI SST instance, and the pointer is used
without a NULL check. Both the out-of-b
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: cancel card-detect work on remove
Disabling the device interrupt and freeing the IRQ prevents new card-detect
work from being queued, but carddet_work already queued by the handler can
still run after via_sd_remove() returns. via_sdc_card_detect() recovers the
host through container_of() and dereferences its MMIO base; once remove()
returns the host can be freed, so that work would touch freed memory.
Cancel carddet_work after freeing the IRQ and before cancelling
finish_bh_work, which the card-detect handler can also queue. carddet_work
can re-enable the i