Vulnerabilidades de linux-gke · Página 182

ocfs2: validate fast symlink target during inode read

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that co

• Actualiza a 7.0.0-1007.8

ocfs2: reject FITRIM ranges shorter than a cluster

In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject FITRIM ranges shorter than a cluster ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for reques

• Actualiza a 7.0.0-1008.9

ocfs2/dlm: require a ref for locking_state debugfs open

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: require a ref for locking_state debugfs open debug_lockres_open() copies inode->i_private into struct debug_lockres and debug_lockres_release() later drops that pointer with dlm_put(). That only works if open successfully pins the struct dlm_ctxt. Today open calls dlm_grab(dlm) but ignores its return value. Once the last domain unregister has removed the context from dlm_domains, dlm_grab() returns NULL, yet open still stores the raw pointer and returns success. The later release path is outside the debugfs removal barrier, so it can call dlm_put() after dlm_

• Actualiza a 7.0.0-1008.9

netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount

In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not

• Actualiza a 7.0.0-1008.9

RDMA/irdma: Fix OOB read during CQ MR registration

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix OOB read during CQ MR registration Sashiko pointed out an unrelated bug during a previous patch: https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com This change fixes the bug by eliminating the cqmr->split field which was not being set properly and instead just checks the CQ resize feature flag directly. The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE is set, but it was not being set until CQ creation time, which is _after_ CQ memory registration (the only other place where it is referenced). As a result, i

• Actualiza a 7.0.0-1008.9

RDMA/siw: Fix endpoint/socket association handling

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix endpoint/socket association handling Disassociating a socket from an endpoint via siw_socket_disassoc() may release the last reference on that endpoint and free it. Therefore, don't clear the endpoints socket pointer after calling that function, but within. This fixes a: BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075) which occurred after processing a malformed MPA request during connection establishment, causing the new endpoint to be closed.

• Actualiza a 7.0.0-1007.8

bpf: Clear rb node linkage when freeing bpf_rb_root

In the Linux kernel, the following vulnerability has been resolved: bpf: Clear rb node linkage when freeing bpf_rb_root bpf_rb_root_free() detaches the root by copying the current rb_root_cached and then replacing the live root with RB_ROOT_CACHED. It then walks the copied root and drops each object contained in the tree. This leaves the rb node state intact while dropping the object. If the object is refcounted and survives the drop, its bpf_rb_node_kern still contains an owner pointer to the freed root and stale rb tree linkage. If a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove() can incorrectly pass the owner

• Actualiza a 7.0.0-1008.9

kernfs: link kn to its parent before the LSM init hook

In the Linux kernel, the following vulnerability has been resolved: kernfs: link kn to its parent before the LSM init hook After commit 12e9e3cd03b5 ("simpe_xattr: use per-sb cache"), kernfs_xattr_set() and kernfs_xattr_get() compute the cache via kernfs_root(kn) before any other check. kernfs_root(kn) walks kn->__parent first and falls back to kn->dir.root, both of which are NULL on a freshly kmem_cache_zalloc()'d kn. kn->__parent was being set in kernfs_new_node() after __kernfs_new_node() returned, and kn->dir.root is set even later by kernfs_create_dir_ns() / kernfs_create_empty_dir(). The LSM kernfs_init_security hook is invoked from

wifi: wcn36xx: fix heap overflow from oversized firmware HAL response

In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix heap overflow from oversized firmware HAL response The firmware response dispatcher copies all synchronous HAL responses into the 4096-byte hal_buf without validating the response length. A response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow with firmware-controlled content. Add a bounds check on the response length.

• Actualiza a 7.0.0-1008.9

wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication

In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication The firmware-controlled rsp->count field is used as the loop bound for indexing into the flexible rsp->regs[] array without validation against the message length. A count exceeding the actual data causes out-of- bounds reads from the heap-allocated message buffer. Add a check that count fits within the received message.

• Actualiza a 7.0.0-1008.9

ALSA: seq: Clear variable event pointer on read

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Clear variable event pointer on read snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer

• Actualiza a 7.0.0-1008.9

bpf: Reject sleepable BPF_LSM_CGROUP programs at load time

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable BPF_LSM_CGROUP programs at load time The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should not attach any sleepable BPF programs there. Add support to the verifier to explicitly reject attempts to load sleepable BPF programs destined for LSM cgroup attachment. Without this, we get the following splat from a BPF_LSM_CGROUP program marked BPF_F_SLEEPABLE attached to file_open when it calls bpf_get_dentry_xattr(): BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567 in_atomic(): 0, irqs_disabled(): 0, non

• Actualiza a 7.0.0-1008.9

bpf: Fix NMI/tracepoint re-entry deadlock on lru locks

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NMI/tracepoint re-entry deadlock on lru locks NMI and tracepoint BPF programs can re-enter the per-CPU or global LRU lock that bpf_lru_pop_free()/push_free() already hold on the same CPU, AA-deadlocking. Lockdep reports "inconsistent {INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5) and "possible recursive locking detected" on &loc_l->lock (syzbot 18b26edb69b2e19f3b33). Prior trylock and rqspinlock based fixes (see links) were nacked because compromised on reliability. This patch converts every LRU lock site to rqspinlock_t and adds a recovery

• Actualiza a 7.0.0-1008.9

wifi: mac80211: bound S1G TIM PVB walk to the TIM element

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bound S1G TIM PVB walk to the TIM element ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a received TIM element. The TIM is handed in as the element payload: ieee802_11_parse_elems_full() stores elems->tim = elem->data and elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes are [tim, tim + tim_len). When walking the encoded blocks the function passes the walker an end sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <=

• Actualiza a 7.0.0-1008.9

bpf: Fix NULL pointer dereference in bpf_task_from_vpid()

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL pointer dereference in bpf_task_from_vpid() bpf_task_from_vpid() looks up a task in the pid namespace of the current task, via find_task_by_vpid(): find_task_by_vpid(vpid) find_task_by_pid_ns(vpid, task_active_pid_ns(current)) find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr) cgroup_skb programs run in softirq, which may interrupt a task that is itself in do_exit(). Once that task has passed exit_notify() -> release_task() -> __unhash_process(), its thread_pid is cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns() dereferences &NUL

• Actualiza a 7.0.0-1008.9

RDMA/nldev: Fix locking when accessing mr->pd

In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer.

• Actualiza a 7.0.0-1008.9

ASoC: amd: acp-sdw-legacy: Bound DAI link iteration

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-legacy: Bound DAI link iteration create_sdw_dailinks() walks soc_dais until it finds an entry with initialised cleared, but soc_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. This was reported by KASAN: BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach] Read of size 1 Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array.

• Actualiza a 7.0.0-1008.9

ASoC: amd: acp-sdw-sof: Bound DAI link iteration

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array.

• Actualiza a 7.0.0-1008.9

firmware_loader: Fix recursive lock in device_cache_fw_images()

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix recursive lock in device_cache_fw_images() A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry f

• Actualiza a 7.0.0-1008.9

configfs: fix lockless traversals of ->s_children

In the Linux kernel, the following vulnerability has been resolved: configfs: fix lockless traversals of ->s_children Having the parent directory locked protects entries from removal by another thread, but it does *not* protect cursors from being moved around by lseek() - or freed, for that matter.

• Actualiza a 7.0.0-1008.9