watchdog: rtd119x: Avoid division by zero
In the Linux kernel, the following vulnerability has been resolved: watchdog: rtd119x: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic.
Publicación Actualización
PatchFirst · Vulnerabilidades recientes
Vulnerabilidades de linux-realtime · Página 39
Vulnerabilidades publicadas para linux-realtime en los últimos 30 días: 987. Incluidas en el catálogo KEV: 0.
Vulnerabilidades: 6314
watchdog: rzv2h: Avoid division by zero
In the Linux kernel, the following vulnerability has been resolved: watchdog: rzv2h: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic.
Publicación Actualizaciónwifi: rsi: fix heap OOB write on key removal
In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix heap OOB write on key removal When a key is removed (data == NULL), rsi_hal_load_key() runs: memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ); set_key is a struct rsi_set_key *, so the subscript is scaled by sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is skb->data + 2560, and the memset writes 144 zero bytes starting 2.4KB past the end of the 160-byte skb data buffer, corrupting unrelated heap objects. The intended byte offset would have been (u8 *)set_key + FRAME_DESC_SZ. The write fires on every DISABLE_KEY callback, so
Publicación Actualizaciónwifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver ieee80211_set_bitrate_mask() checks if the interface is running via ieee80211_sdata_running(), but it does not check if the interface is still present in the driver. When sdata is running but IEEE80211_SDATA_IN_DRIVER is not set, the call reaches drv_set_bitrate_mask() in driver-ops.h which hits wlan1: Failed check-sdata-in-driver check, flags: 0x0 WARNING: net/mac80211/driver-ops.h:884 at drv_set_bitrate_mask Syzkaller triggers this via wext SIOCSIWRATE ioctl. The Call Trace shows wext_ioctl_dis
Publicación Actualizacióndrm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create()
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create() Smatch complains that returning a NULL here will lead to a NULL pointer dereference in drm_mode_addfb2(). Return an error pointer instead.
Publicación Actualizacións390/boot: Avoid IPL parameter append past command line
In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid IPL parameter append past command line A command line may occupy all but the terminating byte of COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size to the IPL parameter conversion helpers and points the destination one byte past early_command_line. The helpers subtract one from the unsigned size and write the converted parameter outside the command line buffer. Convert the IPL parameter in the command line parsing buffer first. A parameter beginning with '=' can then replace the existing command line regardless of its length, while
Publicación Actualizaciónnet: icmp: avoid invalid transport header access in icmp_send tracepoint
In the Linux kernel, the following vulnerability has been resolved: net: icmp: avoid invalid transport header access in icmp_send tracepoint syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE(): WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline] WARNING: at udp_hdr include/linux/udp.h:23 [inline] WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 Call trace: skb_transport_header include/linux/skbuff.h:3087 [inline] udp_hdr include/linux/udp.h:23 [inline] do_trace_event_raw_event
Publicación Actualizaciónnet: iptunnel: fix stale transport header during tunnel decapsulation
In the Linux kernel, the following vulnerability has been resolved: net: iptunnel: fix stale transport header during tunnel decapsulation Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale transport_header offset after tunnel decapsulation. BUG: unable to handle page fault for address: ffffed102091a42e Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__asan_load2 <IRQ> qdisc_pkt_len_segs_init (net/core/dev.c:4145) __dev_queue_x
Publicación Actualizacións390/ipl: Fix NULL deref in kdump without re-IPL parm block
In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in kdump without re-IPL parm block Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case, reipl_type_init() selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL. kdump passes the re-IPL parameter block to the dump kernel through os_info. Before commit 3b9678472bab ("s390/ipl: correct kdump reipl block checksum calculation"), the os_info entry was added only for IPL types which initialized reipl_block_actual. That commit moved the os_info update to machine_crash_shutdown(), maki
Publicación Actualizacións390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block
In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passes the re-IPL parameter block through os_info, the stand-alone dump passes it through the IPL parm block address and checksum in lowcore. Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case reipl_type_init() selects IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless, dump_reipl_run() unconditionally dereferences it when preparing the lowcore fields. This may happen to work by chance when address zero conta
Publicación Actualizaciónlocking/lockdep: Invalidate stale class_cache entries for zapped classes
In the Linux kernel, the following vulnerability has been resolved: locking/lockdep: Invalidate stale class_cache entries for zapped classes syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in hlock_class() due to an invalid class_idx: WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203 Workqueue: wg-crypt-wg0 wg_packet_tx_worker RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline] RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203 Call Trace: <IRQ> lock_acquire+0x106/0x3
Publicación Actualizaciónaf_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
In the Linux kernel, the following vulnerability has been resolved: af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer. Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait in unix_stream_read_generic() if recv() is blocking and the last skb in the queue is MSG_OOB skb. In such a situation, TCP returns 0 immediately regardless of blocking or non-blocking. Let's follow the behaviour.
Publicación Actualizaciónnet: ipv4: Fix UDP length overflow with PMTU discover and big MTU
In the Linux kernel, the following vulnerability has been resolved: net: ipv4: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce: 1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will be set to that MTU in ip_setup_cork. 2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be set to device MTU (cork->fragsize) in
Publicación ActualizaciónBluetooth: btintel_pcie: fix tx_handle bounds off-by-one
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so tfd_index == txq->count is already out of range. Change the guard in btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'. This issue was reported by Claude Mythos.
Publicación Actualizacióndrm/xe: Guard page-fault worker with runtime PM check
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Guard page-fault worker with runtime PM check During VM teardown, the VM's runtime PM reference is dropped asynchronously, allowing the device to autosuspend while stale page faults belonging to the now-dead VM are still queued. When the page-fault worker later tries to ack one of these, it calls into guc_ct_send_locked() on an already-suspended device, tripping: Assertion `!xe_pm_runtime_suspended(xe)` failed! WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe] A live VM/exec queue always holds a PM reference while it has outstanding work
Publicación Actualizaciónx86/amd_node: Avoid divide by zero on virtualized systems
In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Avoid divide by zero on virtualized systems On a virtualized system, the number of nodes does not have a relationship to the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which crashes with a divide by zero in: if (count++ % roots_per_node) because the underlying topology code on Xen ends up making num_nodes 2 and num_roots 1 and the integer division result is 0. The issue is seen with Xen, but it could affect other systems. Set roots_per_node to 1 in this case. Print a firmware bug when this is performed for non-virtualized systems
Publicación Actualizacióndrm/amdgpu: skip gfx switch_power_profile during GPU reset
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip gfx switch_power_profile during GPU reset During resume from GPU reset, the gfx idle work may invoke switch_power_profile before the reset completes. This causes the following assert error because the register access occurs without first releasing the GPU reset semaphore: [ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0 [ 1576.768940] Call Trace: [ 1576.768944] <TASK> [ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu] [ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu] [ 1576.769437] smu_cmn_send_smc_msg_with_param
Publicación Actualizaciónexec: do_close_on_exec() before taking exec_update_lock
In the Linux kernel, the following vulnerability has been resolved: exec: do_close_on_exec() before taking exec_update_lock do_close_on_exec() currently happens while holding the exec_update_lock, which is used in a lot of places that access process state to synchronize access checks. I recently added another such use of exec_update_lock, causing a regression. do_close_on_exec() can block waiting for a reply from a filesystem. That means a hung filesystem can block codepaths that use exec_update_lock; and it also means that a FUSE filesystem which attempts to inspect the calling process can deadlock. To avoid such problems, move do_close_
Publicación Actualizacións390/crypto: Fix skcipher_walk return code handling in aes_s390
In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix skcipher_walk return code handling in aes_s390 The return codes from skcipher_walk_virt() were not properly checked before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt(). If skcipher_walk_virt() fails, the walk structure may be in an undefined state, and attempting to process data could lead to incorrect behavior or accessing uninitialized memory. Add proper return code checking to ensure correct handling of the walk initialization and walk advance and eventually return to the caller with that return code.
Publicación Actualizaciónscsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot For QLAFX00 the request ring is ioremapped device I/O memory (ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest of the FX00 path accesses it through memcpy_toio() and the wrt_reg_* helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a plain memset(). On architectures such as ARM64 a regular memset() may emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are invalid on Device memory, leading to a synchronous external abort. Use memset_io() to clear the slot
Publicación Actualización
Comprueba tu servidor
Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.