Vulnerabilidades de linux-lts-xenial · Página 165

dmaengine: Fix double increment of client_count in dma_chan_get()

In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix double increment of client_count in dma_chan_get() The first time dma_chan_get() is called for a channel the channel client_count is incorrectly incremented twice for public channels, first in balance_ref_count(), and again prior to returning. This results in an incorrect client count which will lead to the channel resources not being freed when they should be. A simple test of repeated module load and unload of async_tx on a Dell Power Edge R7425 also shows this resulting in a kref underflow warning. [ 124.329662] async_tx: api initialized (async) [ 12

w1: fix WARNING after calling w1_process()

In the Linux kernel, the following vulnerability has been resolved: w1: fix WARNING after calling w1_process() I got the following WARNING message while removing driver(ds2482): ------------[ cut here ]------------ do not call blocking ops when !TASK_RUNNING; state=1 set at [<000000002d50bfb6>] w1_process+0x9e/0x1d0 [wire] WARNING: CPU: 0 PID: 262 at kernel/sched/core.c:9817 __might_sleep+0x98/0xa0 CPU: 0 PID: 262 Comm: w1_bus_master1 Tainted: G N 6.1.0-rc3+ #307 RIP: 0010:__might_sleep+0x98/0xa0 Call Trace: exit_signals+0x6c/0x550 do_exit+0x2b4/0x17e0 kthread_exit+0x52/0x60 kthread+0x16d/0x1e0 ret_from_fork+0x1f/0x30

i2c: designware: use casting of u64 in clock multiplication to avoid overflow

In the Linux kernel, the following vulnerability has been resolved: i2c: designware: use casting of u64 in clock multiplication to avoid overflow In functions i2c_dw_scl_lcnt() and i2c_dw_scl_hcnt() may have overflow by depending on the values of the given parameters including the ic_clk. For example in our use case where ic_clk is larger than one million, multiplication of ic_clk * 4700 will result in 32 bit overflow. Add cast of u64 to the calculation to avoid multiplication overflow, and use the corresponding define for divide.

wifi: brcmfmac: Check the count value of channel spec to prevent out-of-bounds reads

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Check the count value of channel spec to prevent out-of-bounds reads This patch fixes slab-out-of-bounds reads in brcmfmac that occur in brcmf_construct_chaninfo() and brcmf_enable_bw40_2g() when the count value of channel specifications provided by the device is greater than the length of 'list->element[]', decided by the size of the 'list' allocated with kzalloc(). The patch adds checks that make the functions free the buffer and return -EINVAL if that is the case. Note that the negative return is handled by the caller, brcmf_setup_wiphybands() or brcmf_cf

gfs2: Always check inode size of inline inodes

In the Linux kernel, the following vulnerability has been resolved: gfs2: Always check inode size of inline inodes Check if the inode size of stuffed (inline) inodes is within the allowed range when reading inodes from disk (gfs2_dinode_in()). This prevents us from on-disk corruption. The two checks in stuffed_readpage() and gfs2_unstuffer_page() that just truncate inline data to the maximum allowed size don't actually make sense, and they can be removed now as well.

f2fs: fix to do sanity check on i_extra_isize in is_alive()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on i_extra_isize in is_alive() syzbot found a f2fs bug: BUG: KASAN: slab-out-of-bounds in data_blkaddr fs/f2fs/f2fs.h:2891 [inline] BUG: KASAN: slab-out-of-bounds in is_alive fs/f2fs/gc.c:1117 [inline] BUG: KASAN: slab-out-of-bounds in gc_data_segment fs/f2fs/gc.c:1520 [inline] BUG: KASAN: slab-out-of-bounds in do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734 Read of size 4 at addr ffff888076557568 by task kworker/u4:3/52 CPU: 1 PID: 52 Comm: kworker/u4:3 Not tainted 6.1.0-rc4-syzkaller-00362-gfef7fd48922d #0 Hardware name: Google Google Com

Squashfs: fix handling and sanity checking of xattr_ids count

In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix handling and sanity checking of xattr_ids count A Sysbot [1] corrupted filesystem exposes two flaws in the handling and sanity checking of the xattr_ids count in the filesystem. Both of these flaws cause computation overflow due to incorrect typing. In the corrupted filesystem the xattr_ids value is 4294967071, which stored in a signed variable becomes the negative number -225. Flaw 1 (64-bit systems only): The signed integer xattr_ids variable causes sign extension. This causes variable overflow in the SQUASHFS_XATTR_*(A) macros. The variable is first m

mm/swapfile: add cond_resched() in get_swap_pages()

In the Linux kernel, the following vulnerability has been resolved: mm/swapfile: add cond_resched() in get_swap_pages() The softlockup still occurs in get_swap_pages() under memory pressure. 64 CPU cores, 64GB memory, and 28 zram devices, the disksize of each zram device is 50MB with same priority as si. Use the stress-ng tool to increase memory pressure, causing the system to oom frequently. The plist_for_each_entry_safe() loops in get_swap_pages() could reach tens of thousands of times to find available space (extreme case: cond_resched() is not called in scan_swap_map_slots()). Let's add cond_resched() into get_swap_pages() when fail

ipvlan: ensure network headers are in skb linear part

In the Linux kernel, the following vulnerability has been resolved: ipvlan: ensure network headers are in skb linear part syzbot found that ipvlan_process_v6_outbound() was assuming the IPv6 network header isis present in skb->head [1] Add the needed pskb_network_may_pull() calls for both IPv4 and IPv6 handlers. [1] BUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47 __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47 ipv6_addr_type include/net/ipv6.h:555 [inline] ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline] ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651 ip6_route_outpu

uprobes: Reject the shared zeropage in uprobe_write_opcode()

In the Linux kernel, the following vulnerability has been resolved: uprobes: Reject the shared zeropage in uprobe_write_opcode() We triggered the following crash in syzkaller tests: BUG: Bad page state in process syz.7.38 pfn:1eff3 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3 flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff) raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Hardware name: QEMU Standard PC (i440FX +

usbnet: gl620a: fix endpoint checking in genelink_bind()

In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix endpoint checking in genelink_bind() Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing

sched/core: Prevent rescheduling when interrupts are disabled

In the Linux kernel, the following vulnerability has been resolved: sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_

Kernel Live Patch Security Notice

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc Any unprivileged user can attach N_GSM0710 ldisc, but it requires CAP_NET_ADMIN to create a GSM network anyway. Require initial namespace CAP_NET_ADMIN to do that.)(CVE-2023-52880) In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix overwriting ct original tuple for ICMPv6 OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on th

• Actualiza a 4.4.0-268.302~14.04.1

cifs.upcall makes an upcall to the wrong namespace in containerized environments

A flaw was found in cifs-utils. When trying to obtain Kerberos credentials, the cifs.upcall program from the cifs-utils package makes an upcall to the wrong namespace in containerized environments. This issue may lead to disclosing sensitive data from the host's Kerberos credentials cache.

drop_monitor: fix incorrect initialization order

In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix incorrect initialization order Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw

USB: gadget: f_midi: f_midi_complete to call queue_work

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: f_midi: f_midi_complete to call queue_work When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler.

geneve: Fix use-after-free in geneve_find_dev().

In the Linux kernel, the following vulnerability has been resolved: geneve: Fix use-after-free in geneve_find_dev(). syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, us

ibmvnic: Don't reference skb after sending to VIOS

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Don't reference skb after sending to VIOS Previously, after successfully flushing the xmit buffer to VIOS, the tx_bytes stat was incremented by the length of the skb. It is invalid to access the skb memory after sending the buffer to the VIOS because, at any point after sending, the VIOS can trigger an interrupt to free this memory. A race between reading skb->len and freeing the skb is possible (especially during LPM) and will result in use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ibmvnic_

• Actualiza a 4.4.0-276.310~14.04.1

acct: perform last write from workqueue

In the Linux kernel, the following vulnerability has been resolved: acct: perform last write from workqueue In [1] it was reported that the acct(2) system call can be used to trigger NULL deref in cases where it is set to write to a file that triggers an internal lookup. This can e.g., happen when pointing acc(2) to /sys/power/resume. At the point the where the write to this file happens the calling task has already exited and called exit_fs(). A lookup will thus trigger a NULL-deref when accessing current->fs. Reorganize the code so that the the final write happens from the workqueue but with the caller's credentials. This preserves the (

usb: gadget: core: flush gadget workqueue after device removal

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: flush gadget workqueue after device removal device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up.