fbdev: s3fb: fix potential memory leak in s3_pci_probe()
In the Linux kernel, the following vulnerability has been resolved:
fbdev: s3fb: fix potential memory leak in s3_pci_probe()
In s3_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist()
fbdev: uvesafb: fix potential memory leak in uvesafb_probe()
In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: fix potential memory leak in uvesafb_probe()
Due to an incorrect goto label, memory allocated for modedb and modelist
in uvesafb_vbe_init() is not freed in some error paths. Fix this by
updating the goto label.
fbdev: tdfxfb: fix potential memory leak in tdfxfb_probe()
In the Linux kernel, the following vulnerability has been resolved:
fbdev: tdfxfb: fix potential memory leak in tdfxfb_probe()
In tdfxfb_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() when CONFIG_FB_3DFX_I2C is defined, is not
freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist().
fbdev: carminefb: fix potential memory leak in alloc_carmine_fb()
In the Linux kernel, the following vulnerability has been resolved:
fbdev: carminefb: fix potential memory leak in alloc_carmine_fb()
The memory allocated for modelist in fb_videomode_to_modelist() is not
freed in the subsequent error path.
Fix that by calling fb_destroy_modelist()
fbdev: nvidia: fix potential memory leak in nvidiafb_probe()
In the Linux kernel, the following vulnerability has been resolved:
fbdev: nvidia: fix potential memory leak in nvidiafb_probe()
In nvidiafb_probe(), the memory allocated for modelist in
nvidia_set_fbinfo() is not freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist().
fbdev: tridentfb: fix potential memory leak in trident_pci_probe()
In the Linux kernel, the following vulnerability has been resolved:
fbdev: tridentfb: fix potential memory leak in trident_pci_probe()
In trident_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist().
netfilter: xt_cluster: reject template conntracks in hash match
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_cluster: reject template conntracks in hash match
xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully
initialized conntrack and passes it to xt_cluster_hash().
This causes a state confusion bug when the raw table CT target attaches
a template conntrack to skb->_nfct before normal conntrack processing.
Templates carry IPS_TEMPLATE status but do not have a valid tuple for
hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the
zeroed l3num field.
Reject template conntracks before hashing them. This matches existing
netfilter handling
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the br
netfilter: nf_conntrack_sip: validate skb_dst() before accessing it
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: validate skb_dst() before accessing it
tc ingress and openvswitch do not guarantee routing information to be
available. These subsystems use the conntrack helper infrastructure, and
the SIP helper relies on the skb_dst() to be present if
sip_external_media is set to 1 (which is disabled by default as a module
parameter).
This effectively disables the sip_external_media toggle for these
subsystems without resulting in a crash.
netfilter: nf_nat_sip: reload possible stale data pointer
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: reload possible stale data pointer
quoting sashiko:
------------------------------------------------------------------------
[..] noticed a potential memory bug and header corruption involving the
SIP NAT helper.
In net/netfilter/nf_nat_sip.c:nf_nat_sip():
if (skb_ensure_writable(skb, skb->len)) {
nf_ct_helper_log(skb, ct, "cannot mangle packet");
return NF_DROP;
}
uh = (void *)skb->data + protoff;
uh->dest = ct_sip_info->forced_dport;
if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff,
0, 0, NULL, 0)) {
If a cloned or fr
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6
fragment header and then unconditionally advances skb->mac_header:
skb->mac_header += sizeof(struct frag_hdr);
On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header
yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding
sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7),
after which skb_mac_header_was_set() wrongly reports a MAC header is
present and skb_mac_header() points into
netfilter: nf_conncount: fix zone comparison in tuple dedup
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix zone comparison in tuple dedup
The "already exists" dedup logic in __nf_conncount_add() decides
whether a connection has already been counted and can be skipped instead
of incrementing the connlimit count. It compares the conntrack zone of a
list entry with the zone of the connection being added using
nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or
zone->dir as the direction argument.
Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0
and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask:
NF_CT_Z
gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path
After device_initialize(), the embedded struct device in struct
host1x_device should be released through the device core with
put_device().
In host1x_device_add(), if host1x_device_parse_dt() fails, the current
error path frees the object directly with kfree(device). That bypasses
the normal device lifetime handling and leaks the reference held on the
embedded struct device.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix this by using put_devi
selinux: check connect-related permissions on TCP Fast Open
In the Linux kernel, the following vulnerability has been resolved:
selinux: check connect-related permissions on TCP Fast Open
Similar to Landlock, SELinux was not updated when TCP Fast Open
support was introduced to ensure connect-related permissions are
checked when using TCP Fast Open. Update its socket_sendmsg() hook to
call selinux_socket_connect() when MSG_FASTOPEN is passed.
mfd: sm501: Fix reference leak on failed device registration
In the Linux kernel, the following vulnerability has been resolved:
mfd: sm501: Fix reference leak on failed device registration
When platform_device_register() fails in sm501_register_device(), the
embedded struct device in pdev has already been initialized by
device_initialize(), but the failure path only reports the error and
returns without dropping the device reference for the current platform
device:
sm501_register_device()
-> platform_device_register(pdev)
-> device_initialize(&pdev->dev)
-> setup_pdev_dma_masks(pdev)
-> platform_device_add(pdev)
This leads to a reference leak when platform_device_registe
x86/boot: Validate console=uart8250 baud rate to fix early boot hang
In the Linux kernel, the following vulnerability has been resolved:
x86/boot: Validate console=uart8250 baud rate to fix early boot hang
When the baud rate is empty, 0, invalid, or overflows to 0 when stored
as an int, the system will hang during early boot because of a division
by zero in early_serial_init().
Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent
an early system hang.
Media · CVSS 5.7EPSS 0,23%Sin corrección publicada
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
In the Linux kernel, the following vulnerability has been resolved:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
ev variable is userspace controlled via event->attr.config and used
as an array index after bounds checking, but without speculation
barriers.
Add the missing array_index_nospec() call to prevent speculative
execution.
batman-adv: retrieve ethhdr after potential skb realloc on RX
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: retrieve ethhdr after potential skb realloc on RX
pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind
the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the VLAN header but missed for the ethernet
header which is later used for the TT and AP isolation handling.
batman-adv: access unicast_ttvn skb->data only after skb realloc
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: access unicast_ttvn skb->data only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the ethernet header but missed for the
unicast_packet pointer.
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: ensure minimal ethernet header on TX
As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have
at least eth header len bytes"), it is possible by for a local user with
eBPF TC hook access to attach a tc filter which truncates the packet and
redirects to an batadv interface. But the code assumes that at least
ETH_HLEN bytes are available and thus might read outside of the available
buffer.
The batadv_interface_tx() must therefore always check itself if enough data
is available for the ethernet header and don't rely on min_header_len.