Vulnerabilidades de linux · Página 150

drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers()

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers() The last case label can write two buffers 'mc_reg_address[j]' and 'mc_data[j]' with 'j' offset equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE since there are no checks for this value in both case labels after the last 'j++'. Instead of changing '>' to '>=' there, add the bounds check at the start of the second 'case' (the first one already has it). Also, remove redundant last checks for 'j' index bigger than array size. The expression is always false. Moreover, before or after the patch 'table->last'

virtio-gpu: fix a missing check to avoid NULL dereference

In the Linux kernel, the following vulnerability has been resolved: virtio-gpu: fix a missing check to avoid NULL dereference 'cache_ent' could be set NULL inside virtio_gpu_cmd_get_capset() and it will lead to a NULL dereference by a lately use of it (i.e., ptr = cache_ent->caps_cache). Fix it with a NULL check. [ kraxel: minor codestyle fixup ]

ath9k: fix use-after-free in ath9k_hif_usb_rx_cb

In the Linux kernel, the following vulnerability has been resolved: ath9k: fix use-after-free in ath9k_hif_usb_rx_cb Syzbot reported use-after-free Read in ath9k_hif_usb_rx_cb() [0]. The problem was in incorrect htc_handle->drv_priv initialization. Probable call trace which can trigger use-after-free: ath9k_htc_probe_device() /* htc_handle->drv_priv = priv; */ ath9k_htc_wait_for_target() <--- Failed ieee80211_free_hw() <--- priv pointer is freed <IRQ> ... ath9k_hif_usb_rx_cb() ath9k_hif_usb_rx_stream() RX_STAT_INC() <--- htc_handle->drv_priv access In order to not add fancy protection for drv_priv we can move htc_ha

• Actualiza a 4.4.0-229.263

wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()

In the Linux kernel, the following vulnerability has been resolved: wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi() The simple_write_to_buffer() function will succeed if even a single byte is initialized. However, we need to initialize the whole buffer to prevent information leaks. Just use memdup_user().

Bluetooth: When HCI work queue is drained, only queue chained work

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: When HCI work queue is drained, only queue chained work The HCI command, event, and data packet processing workqueue is drained to avoid deadlock in commit 76727c02c1e1 ("Bluetooth: Call drain_workqueue() before resetting state"). There is another delayed work, which will queue command to this drained workqueue. Which results in the following error report: Bluetooth: hci2: command 0x040f tx timeout WARNING: CPU: 1 PID: 18374 at kernel/workqueue.c:1438 __queue_work+0xdad/0x1140 Workqueue: events hci_cmd_timeout RIP: 0010:__queue_work+0xdad/0x1140 RSP: 0000:ffffc

wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()`

In the Linux kernel, the following vulnerability has been resolved: wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()` Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user() but it forgets to change the value to be returned that came from simple_write_to_buffer() call. It results in the following warning: warning: variable 'rc' is uninitialized when used here [-Wuninitialized] return rc; ^~ Remove rc variable and just return the passed in length if the memdup_user() succeeds.

ax25: fix incorrect dev_tracker usage

In the Linux kernel, the following vulnerability has been resolved: ax25: fix incorrect dev_tracker usage While investigating a separate rose issue [1], and enabling CONFIG_NET_DEV_REFCNT_TRACKER=y, Bernard reported an orthogonal ax25 issue [2] An ax25_dev can be used by one (or many) struct ax25_cb. We thus need different dev_tracker, one per struct ax25_cb. After this patch is applied, we are able to focus on rose. [1] https://lore.kernel.org/netdev/[email protected]/ [2] [ 205.798723] reference already released. [ 205.798732] allocated in: [ 205.798734] ax25_bind+0x1a2/0x230 [ax25] [ 205.798747] __sys

wifi: libertas: Fix possible refcount leak in if_usb_probe()

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: Fix possible refcount leak in if_usb_probe() usb_get_dev will be called before lbs_get_firmware_async which means that usb_put_dev need to be called when lbs_get_firmware_async fails.

usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe

In the Linux kernel, the following vulnerability has been resolved: usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe

In the Linux kernel, the following vulnerability has been resolved: usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

memstick/ms_block: Fix a memory leak

In the Linux kernel, the following vulnerability has been resolved: memstick/ms_block: Fix a memory leak 'erased_blocks_bitmap' is never freed. As it is allocated at the same time as 'used_blocks_bitmap', it is likely that it should be freed also at the same time. Add the corresponding bitmap_free() in msb_data_clear().

RDMA/srpt: Fix a use-after-free

In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt]

jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted Following process will fail assertion 'jh->b_frozen_data == NULL' in jbd2_journal_dirty_metadata(): jbd2_journal_commit_transaction unlink(dir/a) jh->b_transaction = trans1 jh->b_jlist = BJ_Metadata journal->j_running_transaction = NULL trans1->t_state = T_COMMIT unlink(dir/b) handle->h_trans = trans2 do_get_write_access jh->b_modified = 0 jh->b_frozen_data = frozen_buffer jh->b_next_transaction = trans2 jbd2_journal_dirty_metad

ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Fix missing of_node_put() in error paths.

tty: n_gsm: fix deadlock and link starvation in outgoing data path

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix deadlock and link starvation in outgoing data path The current implementation queues up new control and user packets as needed and processes this queue down to the ldisc in the same code path. That means that the upper and the lower layer are hard coupled in the code. Due to this deadlocks can happen as seen below while transmitting data, especially during ldisc congestion. Furthermore, the data channels starve the control channel on high transmission load on the ldisc. Introduce an additional control channel data queue to prevent timeouts and link hangups

video: fbdev: amba-clcd: Fix refcount leak bugs

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: amba-clcd: Fix refcount leak bugs In clcdfb_of_init_display(), we should call of_node_put() for the references returned by of_graph_get_next_endpoint() and of_graph_get_remote_port_parent() which have increased the refcount. Besides, we should call of_node_put() both in fail path or when the references are not used anymore.

powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address

In the Linux kernel, the following vulnerability has been resolved: powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address of_get_next_parent() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() in the error path to avoid refcount leak.

powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader

In the Linux kernel, the following vulnerability has been resolved: powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader of_find_node_by_path() returns remote device nodepointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed

In the Linux kernel, the following vulnerability has been resolved: sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating that the cpuset will just use the effective CPUs of its parent. So cpuset_can_attach() can call task_can_attach() with an empty mask. This can lead to cpumask_any_and() returns nr_cpu_ids causing the call to dl_bw_of() to crash due to percpu value access of an out of bound CPU value. For example: [80468.182258] BUG: unable to handle page fault for address: ffffffff8b6648b0 : [80468.191019] RIP: 0010:dl_cpu_busy+0x30/0x2b0 : [8

video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock() Since the user can control the arguments of the ioctl() from the user space, under special arguments that may result in a divide-by-zero bug in: drivers/video/fbdev/arkfb.c:784: ark_set_pixclock(info, (hdiv * info->var.pixclock) / hmul); with hdiv=1, pixclock=1 and hmul=2 you end up with (1*1)/2 = (int) 0. and then in: drivers/video/fbdev/arkfb.c:504: rv = dac_set_freq(par->dac, 0, 1000000000 / pixclock); we'll get a division-by-zero. The following log can reveal it: divide error: 0000 [#1] PREEMPT SM