Vulnerabilidades de linux · Página 174

drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()

In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop() There is a deadlock in rtllib_beacons_stop(), which is shown below: (Thread 1) | (Thread 2) | rtllib_send_beacon() rtllib_beacons_stop() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rtllib_send_beacon_cb() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold ieee->beacon_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler

tty: Fix a possible resource leak in icom_probe

In the Linux kernel, the following vulnerability has been resolved: tty: Fix a possible resource leak in icom_probe When pci_read_config_dword failed, call pci_release_regions() and pci_disable_device() to recycle the resource previously allocated.

drivers: usb: host: Fix deadlock in oxu_bus_suspend()

In the Linux kernel, the following vulnerability has been resolved: drivers: usb: host: Fix deadlock in oxu_bus_suspend() There is a deadlock in oxu_bus_suspend(), which is shown below: (Thread 1) | (Thread 2) | timer_action() oxu_bus_suspend() | mod_timer() spin_lock_irq() //(1) | (wait a time) ... | oxu_watchdog() del_timer_sync() | spin_lock_irq() //(2) (wait timer to stop) | ... We hold oxu->lock in position (1) of thread 1, and use del_timer_sync() to wait timer to stop, but timer handler also need oxu->lock in position (2) of thr

staging: rtl8712: fix a potential memory leak in r871xu_drv_init()

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix a potential memory leak in r871xu_drv_init() In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not properly released as there is no action will be performed by r8712_usb_dvobj_deinit(). To properly release it, we should call r8712_free_io_queue() in r8712_usb_dvobj_deinit(). Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called by r871x_dev_unload() under condition `padapter->bup` and r8712_free_io_queue() is called by r8712_free_drv_sw(). However, r8

extcon: Modify extcon device to be created after driver data is set

In the Linux kernel, the following vulnerability has been resolved: extcon: Modify extcon device to be created after driver data is set Currently, someone can invoke the sysfs such as state_show() intermittently before dev_set_drvdata() is done. And it can be a cause of kernel Oops because of edev is Null at that time. So modified the driver registration to after setting drviver data. - Oops's backtrace. Backtrace: [<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show) [<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show) [<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show) [<c02c4938>] (kernfs_seq_show)

tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()

In the Linux kernel, the following vulnerability has been resolved: tty: synclink_gt: Fix null-pointer-dereference in slgt_clean() When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat: [ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI [ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17] [ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0 [ 25.077709] Call Trace: [ 25.077924] <TASK> [ 25.078108] unregister_hdlc_device+0x16/0x30 [ 25.078481] slgt_cleanup+0x15

drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()

In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop() There is a deadlock in ieee80211_beacons_stop(), which is shown below: (Thread 1) | (Thread 2) | ieee80211_send_beacon() ieee80211_beacons_stop() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | ieee80211_send_beacon_cb() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold ieee->beacon_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but ti

drivers: tty: serial: Fix deadlock in sa1100_set_termios()

In the Linux kernel, the following vulnerability has been resolved: drivers: tty: serial: Fix deadlock in sa1100_set_termios() There is a deadlock in sa1100_set_termios(), which is shown below: (Thread 1) | (Thread 2) | sa1100_enable_ms() sa1100_set_termios() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | sa1100_timeout() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold sport->port.lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need sport->p

USB: host: isp116x: check return value after calling platform_get_resource()

In the Linux kernel, the following vulnerability has been resolved: USB: host: isp116x: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

staging: rtl8712: fix uninit-value in usb_read8() and friends

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix uninit-value in usb_read8() and friends When r8712_usbctrl_vendorreq() returns negative, 'data' in usb_read{8,16,32} will not be initialized. BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline] BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:643 [inline] string+0x4ec/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 va_format lib/vsprintf.c:1704 [inline] pointer+0x18e6/0x1f70 lib/vsprintf.c:2443 vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810 vprintk_store+0x537/0

staging: rtl8712: fix uninit-value in r871xu_drv_init()

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix uninit-value in r871xu_drv_init() When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0, 'mac[6]' will not be initialized. BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x11

netfilter: nf_tables: initialize registers in nft_do_chain()

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: initialize registers in nft_do_chain() Initialize registers to avoid stack leak into userspace.

• Actualiza a 4.4.0-239.273

ALSA: oss: Fix PCM OSS buffer allocation overflow

In the Linux kernel, the following vulnerability has been resolved: ALSA: oss: Fix PCM OSS buffer allocation overflow We've got syzbot reports hitting INT_MAX overflow at vmalloc() allocation that is called from snd_pcm_plug_alloc(). Although we apply the restrictions to input parameters, it's based only on the hw_params of the underlying PCM device. Since the PCM OSS layer allocates a temporary buffer for the data conversion, the size may become unexpectedly large when more channels or higher rates is given; in the reported case, it went over INT_MAX, hence it hits WARN_ON(). This patch is an attempt to avoid such an overflow and an all

ALSA: pcm: Fix races among concurrent hw_params and hw_free calls

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent hw_params and hw_free calls Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-

mac80211: fix potential double free on mesh join

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix potential double free on mesh join While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is

uaccess: fix integer overflow on access_ok()

In the Linux kernel, the following vulnerability has been resolved: uaccess: fix integer overflow on access_ok() Three architectures check the end of a user access against the address limit without taking a possible overflow into account. Passing a negative length or another overflow in here returns success when it should not. Use the most common correct implementation here, which optimizes for a constant 'size' argument, and turns the common case into a single comparison.

ALSA: pcm: Fix races among concurrent prealloc proc writes

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations).

iio: accel: mma8452: use the correct logic to get mma8452_data

In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: use the correct logic to get mma8452_data The original logic to get mma8452_data is wrong, the *dev point to the device belong to iio_dev. we can't use this dev to find the correct i2c_client. The original logic happen to work because it finally use dev->driver_data to get iio_dev. Here use the API to_i2c_client() is wrong and make reader confuse. To correct the logic, it should be like this struct mma8452_data *data = iio_priv(dev_get_drvdata(dev)); But after commit 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata"), the uppe

jffs2: fix memory leak in jffs2_do_mount_fs

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_do_mount_fs If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88811b25a640 (size 64): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffa5423a06>]

jffs2: fix memory leak in jffs2_scan_medium

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_scan_medium If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910