PatchFirst · Vulnerabilidades recientes
Vulnerabilidades publicadas para linux en los últimos 30 días: 322. Incluidas en el catálogo KEV: 0.
Vulnerabilidades: 5113
In the Linux kernel, the following vulnerability has been resolved: memory: tegra124-emc: Fix dll_change check The code checking whether the specified memory timing enables DLL in the EMRS register was reversed. DLL is enabled if bit A0 is low. Fix the check.
In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: validate qr_numregions in dlm_match_regions() Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()". In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION network message is used to drive loops over the qr_regions buffer without sufficient validation. This series fixes two issues: - Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix listxattr handling when the buffer is full [BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly. kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_obj
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate bg_bits during freefrag scan [BUG] A crafted filesystem can trigger an out-of-bounds bitmap walk when OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT. BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] BUG: KASAN: use-after-free
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate group add input before caching [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x1
In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them.
In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for c
In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix integer overflow in UNMAP bounds check sbc_execute_unmap() checks LBA + range does not exceed the device capacity, but does not guard against LBA + range wrapping around on 64-bit overflow. Add an overflow check matching the pattern already used for WRITE_SAME in the same file.
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix data loss caused by incorrect use of nat_entry flag Data loss can occur when fsync is performed on a newly created file (before any checkpoint has been written) concurrently with a checkpoint operation. The scenario is as follows: create & write & fsync 'file A' write checkpoint - f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call.
In the Linux kernel, the following vulnerability has been resolved: sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks sctp_getsockopt_peer_auth_chunks() checks that the caller's optval buffer is large enough for the peer AUTH chunk list with if (len < num_chunks) return -EINVAL; but then writes num_chunks bytes to p->gauth_chunks, which lives at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8 inside optval. The check is missing the sizeof(struct sctp_authchunks) = 8-byte header. When the caller supplies len == num_chunks (for any num_chunks > 0) the test passes but copy_to_user() writes size
In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: remove sprintf usage Replace it with scnprintf, the buffer sizes are expected to be large enough to hold the result, no need for snprintf+overflow check. Increase buffer size in mangle_content_len() while at it. BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270 Write of size 1 at addr [..] vsnprintf+0xea5/0x1270 sprintf+0xb1/0xe0 mangle_content_len+0x1ac/0x280 nf_nat_sdp_session+0x1cc/0x240 process_sdp+0x8f8/0xb80 process_invite_request+0x108/0x2b0 process_sip_msg+0x5da/0xf50 sip_help_tcp+0x45e/0x780 nf_confirm+0x34d/0x990 [..]
In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: restrict several matches to inet family This is a partial revert of: commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions") to allow ipv4 and ipv6 only. - xt_mac - xt_owner - xt_physdev These extensions are not used by ebtables in userspace. Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4 specific.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual
In the Linux kernel, the following vulnerability has been resolved: net/rds: zero per-item info buffer before handing it to visitors rds_for_each_conn_info() and rds_walk_conn_path_info() both hand a caller-allocated on-stack u64 buffer to a per-connection visitor and then copy the full item_len bytes back to user space via rds_info_copy() regardless of how much of the buffer the visitor actually wrote. rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() only write a subset of their output struct when the underlying rds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sl and the two GIDs via explicit memsets). Several u32
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of
In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: fix queue limit check to include reordered packets The queue limit check in netem_enqueue() uses q->t_len which only counts packets in the internal tfifo. Packets placed in sch->q by the reorder path (__qdisc_enqueue_head) are not counted, allowing the total queue occupancy to exceed sch->limit under reordering. Include sch->q.qlen in the limit check.
In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit() syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit() when accessing skb->len for tx statistics after usb_submit_urb() has been called: BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760 drivers/net/usb/rtl8150.c:712 Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226 The URB completion handler write_bulk_callback() frees the skb via dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU in softirq context before usb_submit_urb() returns in the
In the Linux kernel, the following vulnerability has been resolved: neigh: let neigh_xmit take skb ownership neigh_xmit always releases the skb, except when no neighbour table is found. But even the first added user of neigh_xmit (mpls) relied on neigh_xmit to release the skb (or queue it for tx). sashiko reported: If neigh_xmit() is called with an uninitialized neighbor table (for example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT and bypasses its internal out_kfree_skb error path. Because the return value of neigh_xmit() is ignored here, does this leak the SKB? Assume full ownership and remove the last code pa
Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.